• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.511-516
• /
• 2005

Sorbitan methacrylate was synthesized from sorbitan dehydrated from D-sorbitol using an immobilized lipase. To optimize the enzymatic synthesis of sorbitan methacrylate, response surface methodology was applied to determine the effects of five-level-four-factors and their reciprocal interactions on sorbitan methacrylate biosynthesis. A total of 30 individual experiments were performed, which were designed to study reaction temperature, reaction time, enzyme amount and substrate molar ratio. A statistical model predicted that the highest conversion yield of sorbitan methacrylate was 100%, at the following optimized reaction conditions: a reaction temperature of 43.06 $^{\circ}C$, a reaction time of 164.25 mins., an enzyme amount of 7.47%, and a substrate molar ratio of 3.98:1. Using these optimal factor values under experimental conditions in four independent replicates, the average conversion yield reached 98.7%${\pm}$1.2% and was well within the value predicted by the model.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.807-814
• /
• 1995

Accurate measurements of ozone precursors are required to understand the process and extent of ozone formation in rural and urban areas. Nonmethane hydrocarbons (NMHCs) have been identified as important ozone precursors. Identification and quantification of NMHCs are difficult because of the large number present and the wide molecular weight range encountered in typical air samples. A major plan of the research team of the Climate and Air Quality Taiwan Station (CATs) was the measurement of atmospheric nonmethane hydrocarbons. An analytical method has been development for the analysis of the individual nonmethane hydrocarbons in ambient air at ppb (v) and subppb(v) levels. The whole ambient air samples were collected in canisters and analyzed by GC-FID with $Al_2O_3$/KCl PLOT column. Our targeted for quantitative analysis 43 compounds that may be substantial contributors to ozone formation. The retention indices and molar response factors of some commercially available $C_2{\sim}C_{10}$ hydrocarbons were determined and used to identify and quantify air samples. A quality assurance program was instituted to ensure that good measurements were made by participating in the International Nonmethane Hydrocarbon Intercomparison Experiments (NOMHICE).

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.621-626
• /
• 2021

A sequential design of experiments was used to optimize MOF-801 synthesis process. For the initial screening, a general 2^k factorial design was selected followed by the central composition design, one of the response surface methods. A 2³ factorial design based on the molar ratio of fumaric acid, dimethylformamide (DMF), and formic acid was performed to select the more suitable response variable for the design of experimental method among the crystallinity and BET specific surface area of MOF-801. After performing 8 synthesis experiments designed by MINITAB 19 software, the characteristic analysis was performed using XRD analysis and nitrogen adsorption method. The crystallinity with R² = 0.999 was found to be more suitable for the experimental method than that of BET specific surface area. Based on analysis of variance (ANOVA), it was confirmed that the molar ratio of fumaric acid and formic acid was a major factor in determining the crystallinity of MOF-801. Through the response optimization and contour plot of two factors, the optimal molar ratio of ZrOCl₂·8H₂O : fumaric acid : DMF : formic acid was 1 : 1 : 39 : 35. In order to optimize the synthesis process, the central composition design on synthesis time and temperature was performed under the identical molar ratio of precursors. The results derived through the designed 9 synthesis experiments were calculated using the quadratic model equation. Thus, the maximum crystallinity of MOF-801 predicted under the synthesis time and temperature of 7.8 h and 123 ℃, respectively.

• Archives of Pharmacal Research
• /
• v.27 no.7
• /
• pp.797-805
• /
• 2004

LPD vectors are non-viral vehicles for gene delivery comprised of polycation-condensed plasmid DNA and liposomes. Here, we described a novel anionic LPD formulation containing protamine-DNA complexes and pH sensitive liposomes composed of DOPE and cholesteryl hemisuccinate (Chems). Central composite design (CCD) was employed to optimize stable LPD formulation with small particle size. A three factor, five-level CCD design was used for the optimization procedure, with the weight ratio of protamine/DNA ($X_1$), the weight ratio of Chems/DNA ($X_2$) and the molar ratio of Chems/DOPE in the anionic liposomes ($X_3$) as the independent variables. LPD size ($Y_1$) and LPD protection efficiency against nuclease ($Y_2$) were response variables. Zeta potential determination was utilized to define the experimental design region. Based on experimental design, responses for the 15 formulations were obtained. Mathematical equations and response surface plots were used to relate the dependent and independent variables. The mathematical model predicted optimized $X_1-X_3$ levels that achieve the desired particle size and the protection efficiency against nuclease. According to these levels, an optimized LPD formulation was prepared, resulting in a particle size of 185.3 nm and protection efficiency of 80.22％.

• Environmental Engineering Research
• /
• v.24 no.1
• /
• pp.24-30
• /
• 2019

The present study explores the applicability of response surface methodology (RSM) in conjunction with central composite design (CCD) matrix to statistically optimize ettringite crystallization process for the removal of sulphate from landfill leachate. A three factor-five coded level CCD with 20 runs, was performed to estimate the best fitted model. The RSM results indicated that the fitted quadratic regression model could be appropriate to predict sulfate removal efficiency. The pH was identified as the most dominant parameter affecting sulphate removal. 61.6% of maximum sulphate removal efficiency was obtained at pH of 11.06 for a 1.87 of $Ca/SO_4$ and 0.51 of $Al/SO_4$ molar ratios. The operating cost for ettringite crystallization at optimized conditions was calculated to be 0.52 $/$m^3$. The significance of independent variables and their interactions were tested by analysis of variance. Scanning electron microscope (SEM) and SEM coupled with energy dispersive X-Ray spectroscopy results confirmed the formation of ettringite crystal and were used to describe its morphology features.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.317-333
• /
• 2000

The purpose of this study was to determine the proliferative activity of the osteoblasts and fibroblasts in the midpalatal area and to investigate the adjacent periodontal tissues of individual tooth following rapid expansion of the palate. Ten young adult dogs, aged approximately ten months, were used in the experiment. The experimental design was consisted of 1 week expansion group(Group E1, 3 dogs), 2 week expansion group(Group E2, 3 dogs), 2 week expansion and 2 week retention group(Group E3, 3 dogs), and control group(Group C, 1 dog). For each group, expansion screw was activated one time per day(1/4 turn;$90^{\circ}$) following Hyrax-screw application. The experimental animals in each group were sacrificed at 1, 2 and 4 weeks following palatal expansion. Maxillary tissue blocks were obtained and prepared ior the histomorphologic and immunohistochemical studies. Light mcroscope, polarizing microscope, and soft X-ray apparatus were used in this study, and following results were obtained. 1. In polarizing microscopic study, the expansion groups(E1 & E2) showed blue color representing bone resorption and new bone formation in midpalatal suture area. E3 groups skewed less blue color compared to the E1 and E2 group. But yellow color increased by calcification in the E3 groups. 2. Immunohistochemical study revealed that positive responses of the osteoblasts to PCNA and undifferentiated fibroblasts to EGF in E1 group were somewhat increased. Positive response to PCNA and EGF were increased in fibroblasts and the osteoblasts forming new bone in E2 group. In E3 group, the positive response cell concentrated the periphery of edge of palatal process in both PCNA and EGF. 3. Throughout the expansion period(E1 & E2), light microscopic study showed the edges of the extensive resorption and new palatal processes, indicating bone remodeling within the suture. E3 group exhibited less remodeling of midpalatal suture area. E2 group and E3 group showed cementum formation and resorption at the apex of 3rd premolar and 1st molar E3 group exhibited extensive hyalinized zone on the cervical portion of buccal side of 1st molar. 4. Soft X-ray analysis of E1 group showed hypomineralized defect and microfractures in various parts of the suture areas when compared with control animals. There was no significant difference in the degree of mineralization in the midpalatal suture region between the C and E3 groups. Tooth axis showed tipping of 3rd premolar and 1st molar in the E2 group and E3 group. Based upon these experimental results, it is concluded that the undifferentiated mesenchymal cells always presented in midpalatal suture area following RPE. Differentiated osteoblasts and fibroblasts possess proliferating cellular activity until the 2 week retention period. The posterior teeth are tend to tip buccally as RPE force applied. Retention group exhibited irreversible response with severe hyalinized zone on the buccal surface of the first molar.

• International Journal of Oral Biology
• /
• v.41 no.4
• /
• pp.225-230
• /
• 2016

Inflammation from chronic and acute infections of distal organs and tissues such as periodontitis is a risk factor for atherosclerotic vascular processes. Recently, a new model of atherosclerosis with vascular pathologies was developed in the Mongolian gerbil. In this study, we attempted to develop a model of ligature-induced periodontitis in gerbils and compared the characteristics of that periodontitis model with that in rats and mice. Each gerbil, rat, and mouse was randomly assigned to groups of control and periodontitis. A thread was placed around the cervix of the right and left first molars in the mandible with knots placed on the mesial side of each molar. At day 14 after the ligation, the animals were sacrificed and their mandibles were dissected. To measure alveolar bone loss along with inflammation, histopathological and micro-CT analyses were carried out. Gerbils showed tooth characteristics of deeper gingival crevice, longer cusp, longer root trunk and shorter root than those of rats and mice. The increased CEJ-ABC distance in distal and PDL area in furcation was also observed in ligated gerbils. An inflammatory response in the connective tissue under the junctional epithelium was also shown in all the animals. As a result, we confirmed the induction of periodontitis by ligature in the gerbils. We therefore consider the gerbil to be a useful model for investigating relationship between periodontitis and vascular disease in the same animal.

• YAKHAK HOEJI
• /
• v.42 no.3
• /
• pp.296-301
• /
• 1998

To investigate the effects of ginsenosides from Panax ginseng on mitogenic responses in macrophages and splenocytes from murine, we examined the effects of representative protopanaxadiol and protopanaxatriol ginsenosides ($Rb_1,\;Rb_2,\;Re\;and\;Rg_1$) on tumor necrosis factor-${\alpha}$ (TNF-(${\alpha}$) production in murine macrophage cell line (RAW264.7 cells) stimulated by lipopolysaccharide (LPS) and T cell proliferation in splenocytes stimulated by concanavalin A (Con A). Among the ginsenosides tested, protopanaxadiol ginsenosides ($Rb_1\;and\;Rb_2$) significantly inhibited TNF-${\alpha}$ production in a dose-dependent manner. However, protoppanaxatriol ginsenosides (Re and $Rg_1$) showed little inhibitory activity. The molar concentrations of $Rb_1\;and\;Rb_2$ producing 50% inhibition ($IC_{50}$) of TNF-${\alpha}$ production were $55.8{\mu}g/ml\;(48.0{\mu}M)\;and\;31.8{\mu}g/ml (27.9{\mu}M)$, respectively. As a positive control, prednisolone also exhibited inhibitory activity with an $IC_{50}$ value of $21.7{\mu}M$. In T cell proliferation, $Rg_1$, was not effective but $Rb_1$ and Re or $Rb_2$ significantly increased or inhibited at high concentration, 75 and $100{\mu}g/ml$. In contrast, prednisolone showed potent inhibitory activity with an $IC_{50}$ value of 6.1nM. These results suggest that ginsenosides may take part in the mitogen-induced signaling pathway for TNF-${\alpha}$ production and T cell proliferation from macrophages and splenocytes.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.70-79
• /
• 2022

Biodiesel production has attracted attention as a sustainable source of fuel and is a competitive alternate to diesel engines. The glycerol that is produced as a by-product is generally discarded as waste and can be converted to green chemicals such as acetins to increase bio-diesel profitability. Acetins find application in fuel, food, pharmaceutical and leather industries. Batch experiments and analysis have been previously conducted for synthesis of acetins using glycerol esterification reaction aided by sulfated metal oxide catalysts (SO₄^2-/CeO₂-ZrO₂). The aim of this study was to optimize process parameters: effects of mole ratio of reactants (glycerol and acetic acid), catalyst concentration and reaction temperature to maximize glycerol conversion/acetin selectivity. The optimum conditions for this reaction were determined using response surface methodology (RSM) designed as per a five-level-three-factor central composite design (CCD). Statistica software 10 was used to analyze the experimental data obtained. The optimized conditions obtained were molar ratio - 1:12, catalyst concentration - 6 wt.% and temperature -90 ℃. A packed bed reactor was fabricated and column studies were performed using the optimized conditions. The breakthrough curve was analyzed.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.113-122
• /
• 1998

Stabilization splint therapy Precedes orthodontic intervention to enable the operator to find a 'true' centric(which is stable and comfortable), to test the patient's response to a change in the occlusion, prior to embarking upon a complex course of occlusal therapy : and finally, to see if the centric relation position can be stabilized. For this study, 47 malocclusion Patients enrolled for orthodontic treatment at the Department of Orthodontics, College of Dentistry, Chosun University comprised the malocclusion group, little variation of growth factor by the second molar eruption. They had Cr-Co discrepancy beyond normal range. For each patients the stabilization splint with mutually protected type of occlusal scheme was applied for 3 months. Condylar positions in CR and CO were measured using Penadent articulators, Panadent condylar position indicator(CPI), and transcranial projection before & after stabilization splint therapy. On the basis of this study, the results of this study were as follows 1. In all samples using CPI, there were statistical significances in CR-CO discrepancy(p<0.001) both before 8t after stabilization splint therapy. 2. In Rt and Lt+Rt/2 of superior joint space using transcranial projection, there were statistical significances in CR-CO discrepancy({<0.05) before & after stabilization splint therapy. 3. In supero-inferior components using CPI, there were statistical significances in CR-CO discrepancy(p<0.01) before & after stabilization splint therapy. 4. In all components except Rt using transcranial projection, there were no statistical significances in CR-CO discrepancy(p>0.05) before & after stabilization splint therapy. To sum up, CPI might be more effective than transcranial projection to reveal the changes between CR-CO discrepancies and stabilization splint might be more useful appliance for displaying the vertical changes, than the antero-posterior changes, of condylar position.