• Journal of Powder Materials
• /
• v.21 no.2
• /
• pp.108-113
• /
• 2014

Flake-like $LiCoO_2$ nanopowders were fabricated using electrospinning. To investigate their formation mechanism, field-emssion scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were carried out. Among various parameters of electrospinning, we controlled the molar concentration of the precursor and the PVP polymer. When the molar concentration of lithium and cobalt was 0.45 M, the morphology of $LiCoO_2$ nanopowders was irregular and round. For 1.27 M molar concentration, the $LiCoO_2$ nanopowders formed with flake-like morphology. For the PVP polymer, the molar concentration was set to 0.011 mM, 0.026 mM, and 0.043 mM. Irregular $LiCoO_2$ nanopowders were formed at low concentration (0.011 mM), while flake-like $LiCoO_2$ were formed at high concentration (0.026 mM and 0.043 mM). Thus, optimized molar concentration of the precursor and the PVP polymer may be related to the successful formation of flake-like $LiCoO_2$ nanopowders. As a results, the synthesized $LiCoO_2$ nanopowder can be used as the electrode material of Li-ion batteries.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.3
• /
• pp.246-252
• /
• 2007

$BaTiO_3$ powders were prepared by sol-gel method from different concentration of KOH aqueous solution and Ba/Ti molar ratio. Particle shape, size and crystal structure of prepared $BaTiO_3$ powders were analyzed by SEM, XRD, and FT-IR. As the result of KOH concentration changing, spherical particles were obtained by condition more than 3 M and particle size decreased as concentration increasing. Different appearance showed between dried and sintered powders against changing of Ba/Ti molar ratio. In case of dried powders, the crystallinity decreased as molar ratio increasing. On the other hand, increased as molar ratio increasing in case of sintered powders.

• Journal of Powder Materials
• /
• v.25 no.1
• /
• pp.54-59
• /
• 2018

Sb-doped $SnO_2$ (ATO) transparent conducting films are fabricated using horizontal ultrasonic spray pyrolysis deposition (HUSPD) to form uniform and compact film structures with homogeneously supplied precursor solution. To optimize the molar concentration and transparent conducting performance of the ATO films using HUSPD, we use precursor solutions of 0.15, 0.20, 0.25, and 0.30 M. As the molar concentration increases, the resultant ATO films exhibit more compact surface structures because of the larger crystallite sizes and higher ATO crystallinity because of the greater thickness from the accelerated growth of ATO. Thus, the ATO films prepared at 0.25 M have the best transparent conducting performance ($12.60{\pm}0.21{\Omega}/{\square}$ sheet resistance and 80.83% optical transmittance) and the highest figure-of-merit value ($9.44{\pm}0.17{\times}10^{-3}{\Omega}^{-1}$). The improvement in transparent conducting performance is attributed to the enhanced carrier concentration by the improved ATO crystallinity and Hall mobility with the compact surface structure and preferred (211) orientation, ascribed to the accelerated growth of ATO at the optimized molar concentration. Therefore, ATO films fabricated using HUSPD are transparent conducting film candidates for optoelectronic devices.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.5
• /
• pp.329-335
• /
• 2004

Acid deposition in forest adjacent to the industrial complexes causes soil acidification resulting in the leaching of cations, decreases of buffering capacity and increases of toxic metal concentrations such as Al, Fe, Mn and Cu in soil solution. Changes of nutrient availability equilibria by acid deposition have been known to retard the growth of pine trees. Objective of this research was to assess the critical ratios of Ca/Al and Mg/Al limiting the growth of Pinus thunbergii in the hydroponic culture. The Ca concentration and Ca/Al ratio in stalks of pine tree were increased as increasing Ca/Al molar ratio in the nutrient solution, but were not changed when the Ca/Al molar ratio was adjusted to greater than 1. Growth of Pinus thunbergii was inhibited at the Ca/Al molar ratio lower than l due to the Ca deficiency. The molar ratios of Ca/Al in the needles of Pinus thunbergii showed the similar tendency with the stalks. This indicated that Ca/Al molar ratio of 1 in the growth media was the critical level limiting the growth of Pinus thunbergii. Concentration of Mg and Mg/Al molar ratios in the stalks of pine tree were increased as increasing Mg/Al molar ratio in nutrient solution. Molar ratios of Mg/Al in the needles were increased as increasing Mg/Al ratios in nutrient solution up to 0.83, which was the critical level limiting the growth of Pinus thunbergii.

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.55-69
• /
• 1987

The purpose of this study was to evaluate the stress distributions of the fixed partial denture with five unit intermediate abutment. This fixed partial denture was attached to a three dimensional photoelastic epoxy resin model. Three dimensional photoelastic models were used, with the stress areas recorded photographically. A vertical load was applied to the second molar, which is the most posterior abutment of the fixed partial denture. Similarly, a vertical load was applied to the first molar because this tooth receives the heaviest masticatory load. These loads were added to two types of fixed partial denture. the rigid connector, and the nonrigid connector which was connected on the distal side of the intermediate abutment by a key and keyway device. After the stress patterns in surrounding tissues were observed, the following conclusions were as follows: 1. When the vertical load was applied to the first and second molars on the occlusal surfaces, the surrounding tissues of the roots of the canine, the second premolar, and the second molar were all compressive stresses. 2. When the vertical load was applied on the occlusal surface of the second molar, the tissue surrounding the roots of the canine, the second premolar, and the second molar all showed more stresses with the nonrigid connector than with the rigid connector. 3. When the vertical load was applied to the occlusal surface of the first molar, the stress concentration on the canine and the second molar was similar, whether the rigid or nonrigic connectors were used. However, on the second premolar, the stress concentration shown by the nonrigid connector was noticeably more than that shown by the rigid connector. 4. Whether the rigid or nonrigid connectors were used, when the load was placed on the first molar, the stress concentration on the canine and the second premolar was greater than that observed for the second molar. When the load was placed on the second molar, the load affected the second molar more than the canine and the second premolar.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.20 no.3
• /
• pp.137-146
• /
• 2020

Background: Mandibular third molar removal is the most common surgical procedure encountered in oral and maxillofacial clinics. It also presents the greatest challenges and controversies for surgeons when surgical removal is considered. Furthermore, diverse anesthesia results and success rates are achieved after using the same concentrations of different solutions or the same amounts of local anesthetics. The purpose of this study was to examine the efficiency of using double-cartridge (3.4 ml) 4% lidocaine (high concentration) and 4% articaine with a 1:100000 epinephrine infiltration in the retromolar region for impacted lower third molar surgery. Methods: This double-blind study included 30 patients with symmetrically impacted lower third molars. The patients were randomly selected to receive 4% articaine on one side and 4% lidocaine on the other, as a local anesthetic for third molar surgery. The onset, duration of soft-tissue numbness, pulpal sensitivity, amount of additional local anesthetic needed, pain score during the surgical procedure, and duration of the operation were recorded. Results: The results of this research indicate that 86.7% of the operations in the 4% articaine group and 83.3% of those in the 4% lidocaine group were successful. Furthermore, the outcomes in both groups were not statistically significant (P > 0.05). Numbness onset occurred faster in the articaine group than it did in the lidocaine group. However, the duration of soft-tissue anesthesia and pain scores recorded immediately postoperatively were similar. Conclusion: It is concluded that 4% lidocaine and 4% articaine had a similar infiltration efficacy in the retromolar region and both local anesthetics are adequate for impacted lower third molar surgery. There were no statistically significant differences between the two local anesthetics regarding pain control and the duration of soft-tissue numbness during the procedure.

• Journal of Environmental Science International
• /
• v.32 no.10
• /
• pp.731-739
• /
• 2023

In this study, lab-scale phosphorus coagulation/precipitation experiments were performed using three types of polyaluminum chloride (PAC) with different Al contents (10%, 12%, and 17%). The PO₄-P removal efficiencies at various operating conditions, such as initial PO₄-P concentration, initial pH, and Al/P molar ratio, were evaluated, and correlations among the operating factors affecting phosphorus coagulation/precipitation with PAC were derived to optimize the process efficiency. When the initial PO₄-P concentration was 0.065 and 0.161 mmol P/L under an initial pH of 8-10, the optimal PAC dose was 0.126-0.378 and 0.189-0.667 mmol Al/L, respectively. Under these conditions, the Al/P molar ratio was 2.16-6.18 and 1.28-4.30, respectively, and the PO₄-P removal efficiency was in the range of 40.2-92.5%. When the Al/P molar ratio was 2 or less under an initial pH condition of 6-8, the PO₄-P removal efficiency was approximately ≤40% owing to insufficient Al³⁺ ions. However, when the Al/P molar ratio is 3-5, the PO₄-P removal efficiency improved to approximately 80-90%. Thus, the optimal Al/P molar ratio to achieve a PO₄-P removal efficiency of over 90% was determined to be approximately 4 in the PO₄-P coagulation/precipitation process using PAC.

• The Korean Journal of Pharmacology
• /
• v.30 no.2
• /
• pp.255-260
• /
• 1994

There are some reports about the influences of free fatty acids on the albumin binding of drugs. But they were concerned to the limited free fatty acids, mostly of azapropazone-warfarin bidning site bound drugs and determination of dissociation and association constants by stopped flow technique. These data were not enough to make conculsions for the general tendency of free fatty acid to albumin binding. Therefore the influence of various saturated fatty acids of $C_{10{\sim}20}$, oleic acid and linoleic acid as unsaturated fatty acids to albumin binding of warfarin and dansylsarcosine were studied by equilibrium dialysis. The concentration of free drug was determined by spectrophotometer according to the molar ratios of 0, 0.5, 1, 2 and 4 between free fatty acid and albumin. There were significant increasing in the free durg concentration of warfarin and dansylsarcosine when the molar ratio for capric acid, lauric acid and palmitic acid was 4. The free warfarin concentration was increased significantly at a molar ratio of 4 between oleic acid and albumin. Therefore the albumin binding of durgs can be variated significantly by increased free fatty acid of diabetics and cause to the pharmacokinetic variation between healthy and diabetics.

• The Korean Journal of Nuclear Medicine
• /
• v.16 no.1
• /
• pp.23-30
• /
• 1982

Serum thyroxine binding globulin (TBG) was measured with a radioimmunoassay (RIA) kit (GammaDab TBG). The TBG concentration in 23 adult normals was $23.7{\pm}1.9{\mu}g/ml(mean{\pm}SD)$. The serum TBG levels of $21.6{\pm}3.5{\mu}g/ml$) in hyperthyroidism, $24.7{\pm}4.9{\mu}g/ml$ in subacute thyroiditis, $20.7{\pm}7.0{\mu}g/ml$ in liver cirrhosis and $22.6{\pm}3.7{\mu}g/ml$ in sick patient were not significantly different from normals. The levels of $31.8{\pm}5.9{\mu}g/ml$ in hypothyroidism, $36.2{\pm}5.1{\mu}g/ml$ in pregnancy (p<0.01, p<0.001) and $29.3{\pm}6.1{\mu}g/ml$ in molar pregnancy (p<0.01) were significanty higher that in normals. In various cases without thyroid dieases (euthroid group), the TBG concentration correlated with the value for Amerlex $T_3$ (r=0.816) though there was curvilinear relationship. This relationship was altered in hyperthyroidism, subacute thyroiditis and molar pregnancy in which sera were overloaded with thyroxine $(T_4)$ so that concentration of unoccupied binding sites on TBG (free TBG concentration) were more decreased than expected from normal TBG concentrations. Hypothyroidism was also separated from the curvilinear relationship in euthyroid group indicating that free TBG concentrations were more increased relative to slightly increased TBG concentrations. Measurement of the TBG concentration was considered useful in the diagnosis of TBG defiency, in differentiating molar pregnancy from hyperthyroidism and for correct understanding the hormone binding in liver dieases and other nonthyroidal illness.

• KSBB Journal
• /
• v.14 no.4
• /
• pp.422-428
• /
• 1999

A transformat Alcaligence eutrophus GA5 harboring phbC gene from A. latus was cultivated for production of Poly(3-hydroxybutyrate-4-hydroxybutyrate)[P(3HB-4HB)] containing high molar fraction of 4-hydroxybutyrate(4HB)] containing high molar fraction of 4-hydroxybutyrate(4HB). Transformation did not influenced significantly on total cell growth, on total cell growth, concentration, and content of P(3HB-4HB), however, significantly influenced on 4HB molar fraction in P(3HB-4HB) increasing from 12.3 to 23.5 mol% after 48 h cultivation in two-stage using 1.0%(W/V) of ${\gamma}$-butyrolactone as a precursor compare to parent strain. Above increment may be due to the accelerated polymerization between 3HB and 4HB converted from precusor compound by amplified phbC gene. Citrate increased remarkbly total cell mass and P(3HB-4HB) concentration, but did not influenced on the molar fraction of 4HB, meanwhile, magnesium ion influenced on P(3HB-4HB) concentration and 4HB molar fraction significantly. The two-stage cultivation method was modified, in such a way minimizing P(3HB) accumulated inside of cell grown at first-stage, consquently, 26.3% of P(3HB-4HB) containing 61.0 mol% of 4HB fraction was obtained after 72hr. Furthermore, semi-homopolymeric P(4HB) containing 92.0 mol% of 4Hb was obtained, and its structure was confirmed by $^1$H-NMR.