• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.339-343
• /
• 2006

The aim of this paper is to improve moisture regain of PET fabrics using a lipase treatment. Effects of nine lipase sources, lipase activator and nonionic surfactant on moisture regain of PET fabrics are examined. Moisture regains of lipase-treated samples improve by two times in average compared with untreated and buffer-treated samples. Alkaline treatment creates larger pitting by more aggressive attack into fiber which is proved by SEM and water contact angle measurement. Moisture regain by alkaline treatment ($0.568%{\pm}0.08$) does not improve. However, lipase-treatment (L2 treatment) improves moisture regain up to 2.4 times ($1.272%{\pm}0.05$). Although lipase treatment is more moderate than alkaline treatment, lipase hydrolysis on PET fabrics improves moisture regain, efficiently. K/S values improved confirm that carboxyl and hydroxyl groups are produced on the surface of PET fabrics by lipase hydrolysis. Moisture regain and dyeability improve by lipase hydrolysis on PET fabrics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.5 s.142
• /
• pp.617-625
• /
• 2005

The purpose of this study was to develop functional and environment-friendly polyester fabric by irradiating Ultra-Violet, which was produced by the low-pressure mercury lamp. UV irradiation was conducted with various treatment times and distances. Also, pretreatments of solvents and photoinitiator were used to improve the surface modification effects. The effects of UV irradiation on the moisture regain were found to increase gradually with increase of UV treatment time and decrease of treatment distance. Compared the effects of UVC and UVA, UVC was more effective than UVA. Moisture regain and wicking of PET was increased after UV treatment in our experimental condition. And owing to increasing of moisture regain, static charge was decreased. Pretreatment of solvents such as methanol, ethyl ether and addition of photoinitiator such as Benzophenone accelerated surface modification. The moisture regain was increased but wicking was decreased with pretreatment and addition of photoinitiatior. Therefore it is considered as inappropriate f3r clothing because of wicking effects. Yellowness, tensile strength and elasticity slightly decreased after UV irradiation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.6
• /
• pp.820-828
• /
• 1999

The purpose of this study was to investigate the changes of pore area and water vapour transport by the changes of moisture regain and fabric structure of wool fabrics, As specimens 4 worsted wool fabrics were used. The pore area were measured by image analysis method and dinamic vapour transport and water reisitance was determined by clothing-environment-body modelling system. The pore area was changed by the moisture regain of wool fabrics. The change of pore area was influenced by the yarn twist thread count and cover factor and the weave type. The water vapour transport was changed by the moisture regain. The change of water vapour transport was influenced by the change of pore aree which was determined by image analysis.

• Journal of Sericultural and Entomological Science
• /
• v.13 no.1
• /
• pp.73-78
• /
• 1971

The purpose of this study is to find out the method of conditioned weight test by which the dealing weight of raw silk can be calculated from true fiber in order to do the fair trading. The results of this study were as follows. 1. It is more reasonable than the current test that conditioned weight as a dealing weigh can be calculated by boil-off and moisture regain which is a percentage of boil-on and moisture regain to net weight. Because the boil-off and moisture regain can show directly the amount of true fiber and reproductibility in raw silk. In this study the boil-off and moisture regain is to take dry weight after boiling-off from net weight. 2. To calculate the conditioned weight from boil-of and moisture regain it would be proper that the standard additional ratio is 44 per cent of dry weight after boiling-off. 3. Boil-of percent of the sizing sample skein used in the size test did not show a statistical significance comparing with the boil-off percent of sample skeins (24 skeins) which may represent that of a lot. To observe this result boil-off percent of the sizing sample skein may represent that of a lot. 4. In Korea if conditioned weight test substitute for test of boil-off and moisture regain, we make a profit of two billion won in a year at the current market-price.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.2
• /
• pp.303-311
• /
• 2004

The purposes of this study were to investigate characteristic changes on nonwoven fabric by the charcoal printing. It separate grind charcoal as two different size of particles 45-52${\mu}{\textrm}{m}$ and 53-65${\mu}{\textrm}{m}$ for hand screen printing on three kind of nonwoven fabrics. To examine the effect of charcoal printing on nonwoven fabric were to obselve surface changes by a scanning electron microscope, dyeability by using spectrophotometer, moisture regain by oven method, air permeability, anion property, deodoriration and antibacterial activity. The results were as follows： When charcoal powder concentration increased from 3 to 9％, K/S value also increased from 3.06 to 8.55. When charcoal concentration increased, moisture regain also increased. In same concentration, moisture regain occurred higher as particle of small size. Air permeability decreased when the charcoal printing concentration increased. Anion occurrence appeared 140-160ion/cc from three different kinds of nonwoven fabrics in 3％ and 9％ charcoal concentration. Therefore, occurred anion ineffectively. In concentration of 3％, rate of deodorization measured as 89％, 83％ and 87％, and 9％ concentration caused 96％, 86％ and 93％ of high deodorization. Antibacterial activity examination in nonfinished nonwoven fabric resulted range of 60％, however, 3％ and 9％ concentration finished nonwoven fabric resulted 99.9％ of excellent antibacterial activity.

• Textile Coloration and Finishing
• /
• v.14 no.6
• /
• pp.313-318
• /
• 2002

Chitosan is known to be an excellent biocompatible natural polymer. Recently, with a growing interest of health and environment, chitosan which is good in no harmful effect on human body and environment, has been watched as the finish treatment of hygiene and pleasantness. The purpose of this study is to develop multi functional fabrics by chitosan added on acrylic acid grafted cotton fabrics. Therefore physical properties such as moisture regain, air permeability, whiteness, static voltage and tensile strength of chitosan added on acrylic acid grafted cotton fabrics were investigated. The results are as follows ; According to increased chitosan's concentration, grafting yield was decreased. Therefore thickness of film by treated chitosan added on acrylic acid grafted cotton fabric became thin. FT R spectra of chitosan add on acrylic acid grafted cotton fabric clearly showed peaks of COOH and $NH_2$, Moisture regain, static voltage of chitosan add on acrylic acid grafted cotton fabrics were increased than control. Air permeability, whiteness and tensile strength were decreased than control.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.11
• /
• pp.1252-1259
• /
• 2003

The purpose of this study is to develop multi-functional fabrics by chitosan added on acrylic acid grafted cotton kintted fabrics. Therefore physical properties such as antimicrobial activity, deodorization rate, moisture regain, whiteness, and tensile strength of chitosan added on acrylic acid grafted cotton kintted fabrics were investigated. The results are as follows; According to increased chitosan's concentration, grafting yield was decreased. Therefore thickness of film by treated chitosan added on acrylic acid grafted cotton kintted fabric became thin. FT-IR spectra of chitosan add on acrylic acid grafted cotton kintted fabric clearly showed peaks of COOH and NH$_2$. Antimicrobial activity and deodorization rate of chitosan add on acrylic acid grafted cotton kintted fabrics were increased greatly than untreated. And their durability of laundry were good, Moisture regain of treated fabrics was higher than untreated. Whiteness and tensile strength of treated fabrics were lower than untreated.

• Textile Coloration and Finishing
• /
• v.2 no.3
• /
• pp.51-58
• /
• 1990

Cotton fabrics were mercerized in ammonia water, sodium hydroxide and mixture of ammonia/sodium hydroxide, slack and under tension. X-ray and infrared spectra analyses were used to measure crystallinity of treated cottons. Changes due to swelling, which took place in the accessible regions were determined by moisture regain and dye adsorption. In addition to that crease recovery was compared mutually, and breaking strength-elongation compared, too. Both ammonia water and caustic treatments produced changes in morphology (swollen fibers, decrease in convolutions) and in fine structure of the cellulose (increase accessibility as measured by increased moisture regain, dye adsorption). X-ray diffraction showed partial recrystallization into cellulose III lattic after tension treatment with ammonia water. Both reagents produced increased cotton elongation-at-break with slack mercerization, increased cotton breaking strength with tension mercerization, and increased moisture regain or dye adsorption with slack mercerization.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.3
• /
• pp.185-195
• /
• 1999

This study was carried out to improve the skin care property of the polyester fabric by finishing with sericin. It was known that skin care function, anti-oxidation, anti-tyrosinase activity and anti-elastase activity can be achieved from sericin finish. But, the moisture regain of the finished fabric was measured simply, because the major cause of the discomfort from polyester fabric has been anounced to be wetness. The effects of various treatment conditions on the properties of the finished fabric were measured, and obtained results were as follows: 1. The moisture regain at 40$^{\circ}C$ 90% RH were increased with the sericin uptake increasing. while it was not significant for the effects on the moisture regain depending on the treatment conditions like the degree of polymerization and treatment concentration of the binder. The moisture release of the fabric having sericin uptake 1%, 2% was faster than non treated fabric. The change of the moisture regain of the finished fabric from 40$^{\circ}C$ 90% RH to room temperature was 4∼5 times higher than that of knitted cotton fabric. 2. The frictional static charge was decreased with the degree of polymerization of the binder increasing. While the sericin uptake and treatment concentration of the binder were not significant. 3. The whiteness value of the fabric was slightly decreased by finishing with sericin and binder. In that cases, W values of the finished fabrics were above 90 while that depending on the degree of polymerization of the binder was not significant. 4. The major cause of the yellowness of the finished fabric was proved to be catalyst. The yellowness of the finished fabric with sulfur containing catalyst was lower than that with amine group containing catalyst. 5. The effects of the treatment concentrations of the cross-linking agent, catalyst and drying time on the wash durability were not significant.

• International Journal of Human Ecology
• /
• v.6 no.2
• /
• pp.1-9
• /
• 2005

The purpose of this study was to investigate the effects of two kinds of underwear material on subjects exercising and resting in an ambient temperature of $20^{\circ}C$, a relative humidity of 60% and an air velocity of 0.13m $see^{-1}$. Two kinds of underwear ensemble were tested, differing in their hygroscopic properties: 100% wool (W) with higher moisture regain and 100% cotton (C) with lower moisture regain. Five young females served as subjects. The experiments comprised two repeated periods of 15 min exercise on a treadmill with a speed of 6km $h^{-1}$ followed by 10 min rest. The main results were as follows: 1) Mean skin temperature was significantly higher in W than in C throughout the whole experimental period (p<0.05). 2) The temperature and humidity of the microclimate between the skin and underwear provided by the first layer of clothing was higher in W than in C (p<0.1 and p<0.05, for temperature and humidity, respectively). 3) Heart rate was significantly higher in W than in C (p<0.05). 4) Subjects felt warmer during the second exercise session when wearing wool rather than cotton (p<0.05), and they also reported more increased wetness during the second exercise and rest periods in W than in C (p<0.05). These results suggest that underwear made of wool with higher moisture regain might not act as effectively as cotton to transfer exercise-induced heat from the body to the surrounding air when light exercise is taken in a thermally-neutral environment.