• Korean Journal of Environmental Agriculture
• /
• v.15 no.3
• /
• pp.355-361
• /
• 1996

The Purpose of this study was to investigate the effect of the Change in the operating conditions on rotary turning compost plants. The major parameters investigated were moisture content and mixing of the sawdust and pig farm wastewater. Pig farm scale composting plants with mixing rotary were used in this study. Wastes used for the study were sawdust, pig manure, urine and wastewater. When the moisture content was 75%, the compost product obtained from the plants had better physical characteristics than that obtained from the plants with moisture contents of 70%, 80% and 85%.(two a day mixing). When the turning was twice a day, the compost product obtained from the plants had better characteristics than that obtained from non-mixing.(moisture content 75%). C/N ratio, pH value and coliform bacterial population were stable in the compost.

• Journal of Environmental Health Sciences
• /
• v.24 no.1
• /
• pp.120-131
• /
• 1998

This study was performed to define the physicochemical characteristics of food waste and food wastewater, and to find the effect of moisture content variation and salinity variation on aerobic composting for food wastes. In moisture content variation experiment, the samples of 2-1, 2-2, 2-3 and 24 were prepared by the moisture content of 83.8%, 70.9%, 64.8% and 45.1%, respectively. In salinity variation experiment, the samples of 3-1, 3-2, 3-3 and 3-4 were prepared by the salinity of 0.99%, 1. 69%, 1.75% and 2.34%, respectively. In both experiments, aerobic composting reactors were operated by the mode which was composed of half an hour's stirring and 2 hour's aeration per day, for 45 days. The followings are the conclusions that were derived from this study. 1. In the study of physicochemical characteristics of food waste and food wastewater, the values of pH were 4.19 and 3.96, the values of salinity were 0.91% and 1.17%, and the values of conductivity were 7.6 mS/cm and 18.2 mS/cm, respectively. 2. In food waste, the moisture content was 60.3%, organic compound content was 96.1%, total carbon was 48.0%, total nitrogen was 1.5%(therefore, C/N ratio was 32), and the concentration of total phosphorus was 1.34 mg/kg. 3. The time of temperature ascending was delayed, the highest temperature was lowered, the duration period of high temperature was shortened by the increasing of moisture content. In the higher moisture content, anaerobic condition was formed, bad smell was released, insects were gathered and multiplicated, and the reaction rate of composting was reduced. 4. In moisture content experiment, C/N ratios were changed from the range of 31.2-34.8 at the beginning phase to that of 20.4-28.4 at the last phase. 5. In salinity experiment, the reduction rate of volume was increased(40.3%) when the salinity was decreased(0.99%). Also, the reduction rate of mass was increased(51.8%) when the salinity was decreased(0.99%). This fact denotes that salinity hinders the process of composting. 6. the concentrations of total nitrogen and total phosphorus were increased from 0.74% to 1.10%, and from 0.82 mg/kg to 3.44 mg/kg, respectively when the salinity was decreased from 2.34% to 0.99%.

• Korean Journal of Agricultural Science
• /
• v.16 no.1
• /
• pp.111-117
• /
• 1989

Six cigarette brands produced in Korea and U.S.A. were studied to find the effects of relative humidity, moisture sorption time, temperature, and the amounts of water extracts and total sugar in the brands on the equilibrium moisture contents. The equilibrium contents were higher in the domestic brands than foreign ones and the sorption rates of moisture were faster in the domestic cigarettes. The Korean brands with high contents of water extracts and total sugar had higher equilibrium moisture contents in the range of RH 40-80% at $20^{\circ}C$ for 72hours. These are the reasons that Korean brands contain higher ratio of flue-cured tobacco and American brands are blended with higher ratio of Burley tobacco.

• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.118-126
• /
• 2017

This study was performed to investigate the characteristics of combustion and emissions in pulverized coal fired boiler for using high moisture coal and dry coal through computational fluid dynamics(CFD). We validated this boiler model with performance data of the boiler. The results of flow characteristics showed that climbing speed of gases was increased as blending ratio of high moisture coal was increased. It can decrease a residence time of fuel in the furnace. And it influence coal combustion. The coal burnout and NOx generation in burner level were decreased as increasing blending ratio of high moisture coal. The gas temperature and NOx formation were increased after OFA level due to coal burnout delay.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.2
• /
• pp.81-103
• /
• 1979

The weathered granite soil involves problems in its stability in soil structures depending upon the reduction of soil strength due to the water absorption, crushability, and content of colored mineral and feldspar. As an attemt to solve the problems associated with soil stability, the crushability of weathered granite soil was investigated by conducting tests such as compaction test, CBR test, unconfined compression test, direct shear test, triaxial compression test, and permeability test on the five soil samples different in weathering and mineral compositions. The experimental results are summarized as follows: The ratio of increasing dry density in the weathered granite soil was high as the compaction energy was low, while it was low as the compaction energy was increased. The unconfined compressive strength. and CBR value were highest in the dry side rather than in the soil with the optimum moisture content, when the soil was compacted by adjusting water content. However, the unconfined compressive strength of smples, which were compacted and oven dried, were highest in the wet side rather than in soil with the optimum moisture content. As the soil becomes coarse grain, the ratio of specific surface area increased due to increased crushability, and the increasing ratio of the specific surface area decreased as the compaction energy was increased. The highest ratio of grain crushability was attained in the wet side rather than in the soil with the optimum moisture content. Such tendency was transforming to the dry side as the compaction energy was increased. The effect of water on the grain crushability of soil was high in the coarse grained soil. The specific surface area of WK soil sample, when compacted under the condition of air dried and under the optimum moisture content, was constant regardless of the compaction energy. When the weathered granite soil and river sand with the same grain size were compacted with low compaction energy, the weathered granite soil with crushability had higher dry density than river sand. However, when the compaction energy reached to certain point over limitation, the river sand had higher dry density than the weathered granite soil. The coefficient of permeability was lowest in the wet side rather than in the optimum moisture content, when the soil was compacted by adjusting soil water content. The reduction of permeability of soil due to the compaction was more apparent in the weathered granite soil than in the river sand. The highly significant correlation coefficient was obtained between the amount of particle breakage and dry density of the compacted soil.

• Journal of Environmental Science International
• /
• v.30 no.3
• /
• pp.245-255
• /
• 2021

In this study, we evaluated the effect of the type of sewage sludge (digested, non digested) on drying efficiency according to the polymer injection rate. The drying characteristics were shown using a near-infrared ray (NIR) and a microwave. As a result of the drying characteristics with NIR at a polymer dose ratio of 8%, the heating up period is up to 6 minutes after the start of the drying experiment. Afterwards, the constant rate drying period of the digested sludge (A, C and G sites) was 6 minute → 18 minute, showing a rapid decrease in moisture. On the other hand, non digested sludge (B, D, E, F, H, I, J and K sites) showed gradual drying characteristics compared to digested sludge until complete drying (10%). As the polymer dose ratio of 10% and 12%, the heating up period for digested sludge is up to 6 minute after the start of the experiment. Afterwards, the constant rate drying period of the digested sludge was 6 minute → 20 minute, showing a rapid decrease in moisture. On the other hand, the heating up period of non digested sludge was up to 10 minute after the start of the experiment, and the constant rate drying period was 10 minute → 22 minute, which was shorter than digested sludge. As a result of the drying characteristics with microwave at a polymer dose ratio of 8%, 10% and 12%, the constant rate drying period the digested sludge was 4 minute → 20~22 minute, showing a rapid decrease in moisture. On the other hand, non digested sludge of the constant rate drying period was 4 minute → 22~30 minute, which was longer than digested sludge.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.772-779
• /
• 1989

The effects of screw speeds and moisture contents on the physical properties of texturized extrudate from isolated soy protein were examined by using a single-screw extruder. The screw speeds and moisture contents tested were in the range of 122-334 rpm and 20-35%, respectively, and die temperature were $90-145^{\circ}C$. The texturization characteristics such as nitrogen solubility index, integrity index, chewiness, density, rehydration ratio, and lightness after rehydration were appeared to be influenced by screw speed and moisture content. As the screw speed increased and moisture content decreased, die temperature, nitrogen solubility index, integrity index, lightness before and after rehydration were increased, while chewiness, density, water content of final extrudate wee decreased. The rehydration rate was changed drastically at the feed moisture content of 30% in particular. As the moisture content decreased, the air cell size became large and its number was increased. The effects of interaction between screw speed and moisture content of raw materials on the extrudate characteristics were tested by the analysis of variance.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.167-174
• /
• 1995

This experiment was carried out to investigate the major characters affecting the popping volume of popcorn. Tuygimok 1 (Kp1 ${\times}$ Kp2) and 8 popcorn hybrids' agronomic characters were tested to evaluate a certain extent how much they affect on the popping volume. Moisture con-tent was considered as the most important factor, but failed to evaluate the optimum moisture con-tent level in this experiment moisture range (12.2-14.4%) because popping volume increased as moisture content of kernels increased. The maximum popping volume was obtained at 55-60kg of kernel hardness, 80-90,um of pericarp thickness and 45-50% of S/H (Soft/Hard starch). But the Em/En(Embryo/Endosperm) ratio was negatively associated with the popping volume. Therefore the minimum popping volume was observed at the 10-11 % of Em/En ratio. Moisture content, hardness, pericarp thickness, Em/En and S/H ratio were selected as the appropriate variables for the maxi-mum popping volume using the stepwise forward regression method and the expecting popping volume was estimated by the multiple linear regression formular. The mean popping volume of ninepopcorn hybrids was about 29.2cm3/g.

• Journal of Bio-Environment Control
• /
• v.4 no.1
• /
• pp.74-79
• /
• 1995

This study was made to investigate the effects of soil moisture content according to irrigation methods on the storability and quality of cucumber. The fresh weight loss of cucumber fruit harvested in drip irrigation plot was more than that in conventional irrigation plot at both 13$^{\circ}C$ and 24$^{\circ}C$ storage temperature. Dry weight ratio decreased during storage, and was higher in conventional irrigation plot than drip irrigation plot both 13$^{\circ}C$ and 241 storage. The decrease of dry weight ratio was higher at 24$^{\circ}C$ than 13$^{\circ}C$. Vitamin C was not influenced by soil moisture content, but decreased during storage at 13$^{\circ}C$ and 24$^{\circ}C$ The decrease of vitamin C at 24$^{\circ}C$ in 8 days after storage was twice as much at 13$^{\circ}C$. Firmness was measured differently in two parts of cucumber ; fruit stalk and blossom part. The firmness of fruit stalk part was higher than that of blossom part. This phenomena was observed continuously at until final day at 13$^{\circ}C$ and 24$^{\circ}C$ storage. But the difference of firmness was not showed in soil moisture content. Vitamin C, firmness and other quality characteristics were not influenced by soil moisture content during cultivation. The different soil moisture content according to irrigation methods did not affect the storability and quality of cucumber.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.6
• /
• pp.37-42
• /
• 2002

This study has been performed to investigate the physical and mechanical characteristics of compaction, volume change and compressive strength for reinforced soil mixed with polypropylene fiber, and to confirm the reinforcing effects with admixture such as polypropylene fiber. To this end, a series of compaction test and compression test was conducted for clayey soil(CL) and polypropylene fiber reinforced soil. In order to determine proper moisture contents and mixing ratio, pilot test was carried out for natural soil and PFRS(polypropylene fiber reinforced soil). And the mixing ratio of mono-filament fiber and fibrillated polypropylene fiber admixture was 0.1%, 0.3%, 0.5% and 1.0% by the weight of dry soil. From the experimental results, it was found that the optimum moisture contents(OMC) increased with the mixing ratio of fiber, but the maximum dry unit weight and the volume change was decreased with the mixing ratio. It means that the improvement of the workability and the reduction of the weight of embankment was done by the addition of the polypropylene fiber. And, from the compression test results, it was found that the addition of the polypropylene fiber remarkably improved the compressive strength of PFRS. And it was observed in the viewpoint of strength that the fibrillated polypropylene fiber reinforced soil was more effective than the mono-filament polypropylene fiber reinforced soil.