• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.297-300
• /
• 2004

In this paper, we investigated insulation property of epoxy resin which includes elastomers to improve mechanical property, as varied to additive elastomer contents and to moisture absorption. There are four samples with 5[phr], 10[phr], 15[phr] and 20[phr]. we experimented to acquire insulation property(absorption rate, dissolution rate, apparent rate) and electrical property(perittivity, $tan\delta$, BDV) during respectively the time such as 6[h], 12[h], 18[h], 24[h] for moisture absorption. According to the experimental results, it is appeared that when the additive elastomer contents are increasing or when specimens remain more moisture, absorption rate, dissolution rate, permittivity and $tan\delta$ are slightly increasing but apparent rate and BDV(break-Down Voltage) strength are decreasing in particular, elastomer content [20]phr appeared remarkedly the more increase or decrease than others.

• 한국연초학회지
• /
• 제28권1호
• /
• pp.31-35
• /
• 2006

In this study, the effects of the relative humidity and storage time of blended tobaccos at total blending silo on cut tobacco equilibrium moisture contents, leaf moisture contents and migration of casing materials of tobacco types were investigated. To maintain the cutting moisture content(21 $\pm$ 1 %), it is necessary to keep 75 % relative humidity at 28 $^{\circ}C$ at total blending silo. The moisture content of reconstituted tobacco sheet was changed from $13{\sim}14$ % to $19{\sim}21$ % within 2 h after preblending. The contents of glycerin and fructose of tobacco types followed by storage time after preblending were not changed significantly. From these results, it is suggested that 2 h storage time after preblending was sufficient to maintain physical properties of cut tobaccos and tobacco taste and fragrance.

• 한국연초학회지
• /
• 제29권2호
• /
• pp.59-65
• /
• 2007

The study was carried out to investigate water activity, physicochemical properties and color degree of burley tobacco stored in shelf with different moisture content for 56 days. The study was consist of two experimental designs, that is, moisture content in burley tobacco was kept to 13 to 15 %, 17 to 19 %, and 21 to 23 % under ambient temperature of $20^{\circ}C$ with relative humidity of 24 %, and another group of in burley tobacco was only kept in ambient temperature of $3^{\circ}C$ with relative humidity of 50 % for 56 days with same water content of former treatment. Normal leaves were kept for 56 days under 21 to 23% of moisture content with increased water activity and TSNA(tobacco-specific nitrosamine content. It was considered that favorable leaves conditions are due to favorable microbial growth resulting in increased TSNA content. The total nitrogen content has not changed in two experimental groups for 56 days, otherwise the nitrate form nitrogen and total alkaloid contents were only increased by 21 to 23 % of water content. Degree of pH change was slightly decreased in both storage and water treatment. It was more decreased in 21 to 23% of moisture content than that of other moisture content. In stored leaf tobacco, higher moisture content caused lower brightness, yellow degree, and carbonization quotient.

• 한국식품영양과학회지
• /
• 제38권12호
• /
• pp.1760-1766
• /
• 2009

찹쌀가루, 쌀가루, 탈지콩가루 및 소금을 첨가하여 수분함량 16-18%, screw 속도 300 및 400 rpm, feed rate 43.4kg/hr 조건에서 extruder로 제조한 유과바탕의 특성은 다음과 같았다. 길이, 직경 및 비용적은 extruder에서 공급되는 수분함량이 낮을수록 크게 나타났다. 유과바탕의 색도 중 L값은 수분함량이 많을수록 높은 반면, a값 및 b값은 낮게 나타났다. 유과바탕의 수분흡착지수는 수분 함량이 많을수록 유의적으로 증가되었다. 유과바탕의 x-ray 회절도는 수분함량 16% 및 17%에서는 B도형을 나타냈으며, 수분함량 18%에서는 A도형을 나타냈다. 상대적 결정화도와 breaking strength는 수분함량 16%에서 가장 낮게 나타났으며, 17%, 18%에서는 유의적인 차이가 없었다. TPA에서 hardness는 수분함량 16% 및 17%, screw 속도 400 rpm에서 가장 낮게 나타났다. 유과바탕의 단면을 40배로 확대하여 관찰한 유과바탕은 수분함량이 증가할수록 기공의 크기가 컸고 세포벽은 두꺼웠다. 유과바탕의 관능검사 결과 수분함량에 따른 색과 향미에 대한 기호도는 유의적인 차이는 없었으나, 맛, 외관, 입안에서의 느낌 및 전체적인 선호도는 수분함량이 낮을수록 기호도는 높게 나타났다.

• 한국농공학회논문집
• /
• 제57권6호
• /
• pp.173-183
• /
• 2015

The aim of this study was to develop a soil moisture simulation model equipped with meteorological data enhanced by WRF (Weather Research and Forecast) model, and this soil moisture model was applied for quantifying soil moisture content and irrigation requirement. The WRF model can provide grid based meteorological data at various resolutions. For applicability assessment, comparative analyses were conducted using WRF data and weather data obtained from weather station located close to test bed. Water balance of each upland grid was assessed for soils represented with four layers. The soil moisture contents simulated using the soil moisture model were compared with observed data to evaluate the capacity of the model qualitatively and quantitatively with performance statistics such as correlation coefficient (R), coefficient of determination (R2) and root mean squared error (RMSE). As a result, R is 0.76, $R^2$ is 0.58 and RMSE 5.45 mm in soil layer 1 and R 0.61, $R^2$ 0.37 and RMSE 6.73 mm in soil layer 2 and R 0.52, $R^2$ 0.27 and RMSE 8.64 mm in soil layer 3 and R 0.68, $R^2$ 0.45 and RMSE 5.29 mm in soil layer 4. The estimated soil moisture contents and irrigation requirements of each soil layer showed spatiotemporally varied distributions depending on weather and soil texture data incorporated. The estimated soil moisture contents using weather station data showed uniform distribution about all grids. However the estimated soil moisture contents from WRF data showed spatially varied distribution. Also, the estimated irrigation requirements applied WRF data showed spatial variabilities reflecting regional differences of weather conditions.

• 한국작물학회지
• /
• 제49권1호
• /
• pp.46-51
• /
• 2004

The film coated snap bean (Phaseolus vulgaris) seeds with five different coating materials treated with 3% increase in seed weight were planted at sandy loam soil controlled moisture content of 18, 19, 20 and 21 %. The oxygen diffusion rate (ODR) was calculated from the different moisture content soil. The number of normal seedlings, seedling vigor, and seedling capability in field (seed vigor x dry matter weight) were observed at 9 days after planting and compared to the changes of ODR. The germination rate and ODR were sharply decreased simultaneously in the seeds planted at 21 % soil moisture content. Seedling emergence did not occur at all as the soil moisture content increased above 22 %. Hence this value should be considered as the threshold of soil moisture content for seedling emergence. An ODR value under 20% did not influence the percent emergence significantly. The certain difference observing in the emergence at the same ODR was not related clearly to the condition of soil. So it can be assumed that the limit of soil moisture content for the emergence of snap bean was approximately 20%. The value of 18% soil moisture content may be considered as the optimum for snap bean emergence. There was close relationship between the mean value of ODR in different soil moisture contents and the emergence. The germination rates of the seeds coated with the different materials were quite different when the seeds were planted at 21 % soil moisture. Dry weight of the seedlings from film coated seeds was decreased slightly, but the germination rates were not much different from the non-treated control under relatively higher soil moisture content (21 %). Major factor lowering emergence rate was oxygen stress while film coating act as a minor constraint for snap bean sown in excess soil moisture condition.

• Journal of Biosystems Engineering
• /
• 제26권5호
• /
• pp.469-474
• /
• 2001

Milling the rice with low moisture requires more energy, produces more cracked rice, and results in reducing taste of cooked rice. Accordingly, it is necessary to add moisture to the rice with low moisture to obtain optimum moisture level for milling and taste of rice. This study was performed to evaluate the influence of initial moisture content and absorption rate on rice crack, milling energy and whiteness of milled rice and to obtain the information for design of rewetting system mounted on stirring device in grain bin. The tests were conducted for the four levels of initial moisture content in the range of 11.4 to 14.5%(w.b.) and six levels of absorption rate in the range of 0.04 to 1.0%, w.b./hr. In the case of lower moisture content below 12%(w.b.), crack ratios of brown rice were remarkably high regardless of initial moisture contents. Therefore, it was found that rough rice below 12%(w.b.) in initial moisture content could not rewetted by spraying water without crack generation of low level. Absorption rate must be below 0.3%, w.b./hr to maintain crack ratio increase of less than 1% regardless of initial moisture contents. In the case of allowable crack ratio increase of 2% and 5%, it was found that the maximum absorprion rate was respectively 0.6%, w.b./hr and 1.0%, w.b./hr in the initial moisture content of above 13.5%(w.b.). Rewetting the rough rice in moisture content of 11.4 to 14.5%(w.b.) to 14.3 to 16.9%(w.b.) decreased milling energy consumption by 15.9 to 22.3%. The effect of energy saving was higher in the samples of higher initial moisture content. Whiteness of milled rice was decreased by 0.5 to 1.5.

• Journal of Biosystems Engineering
• /
• 제30권2호
• /
• pp.95-101
• /
• 2005

Adsorption and desorption experiments were carried out on rough rice and brown rice (Nampyung) at 5, 15, 25, 35, $45^{\circ}C$ for moisture contents between 8.7 and $25\%$ (db). The method employed was to measure the equilibrium relative humidity (ERH) of air in contact with the grain under static conditions, using an electronic hygrometer The effects of temperature and moisture contents were investigated, and the measured values were fitted to the modified Henderson, the modified Chung-Pfost, the modified Halsey and the modified Oswin model. The ERHs of rough rice and brown rice decreased with an decrease in moisture content and temperature, and the effects of temperature was no significant at moisture content of $25\%$ (db). Equilibrium moisture content (EMC) of brown rice was higher than rough rice at same temperature and relative humidity. Desorption EMC is higher than the adsorption, but there is no significant difference between desorption and adsorption EMC in moisture content near $25\%$ (db) at rough rice and near 9, 21 and $25\%$ (db) at brown rice. The modified Oswin model was the best in describing the adsorption EMC and the modified Chung-Pfost model was the best in describing the adsorption ERH of rough rice. The modified Oswin model was the best in describing the adsorption EMC/ERH of brown rice. The modified Chung-Pfost model was the best in describing the desorption EMC/ERH of rough rice and brown rice.

• 한국농공학회지
• /
• 제36권2호
• /
• pp.123-131
• /
• 1994

Experimental studies were conducted to make clear the soil moisture environment under the condition of paddy-upland rotational fields by investigating water-table depths and soil moisture contents during growing season of crops in two kinds of soil. The following results were obtained. 1.Although water-table depths fluctuated with the amount of rainfall in the experimental field, it seemed that the variation of vater4able depths in the paddy-upland rotational, field was strongly affected by the condition of locations on paddy fields. 2.It is recognized that the concept of sum of excess water depth(SEWxx) and sum of excess water day(SEDxx) can be used to represent the soil moisture stress index due to the fluctuation of water-table depths. 3.The results of this study clearly indicate that drainage in paddy-upland rotational field to maintain an optimum soil moisture content must be made by introducing the concept of block drainage which needs both subsurface drainage and intercept drainage around a field. 4.Soil moisture contents were affected by both the amount of rainfall and water-table depths, however, the moisture content for top soil showed higher correlation with the amount of rainfall while that for subsoil with water-table depths.

• 농업과학연구
• /
• 제16권1호
• /
• pp.118-128
• /
• 1989

국내산(國內産) 황색종(黃色種)과 버어리종(種), 판상엽(板狀葉), 주맥(主脈) 평형수분(平衡水分), 전당(全糖) 및 수추출물(水抽出物) 등을 분석(分析) 측정(測定)하여, 상호관계(相互關係)를 검토(檢討)하여 얻은 결과(結果)를 요약(要約)하연 다음과 같다. 1. 잎담배를 품종별(品種別)로 $20^{\circ}C$, RH60%조건(條件)에서 72시간경과(經過)시키면 평형수분(平衡水分)에 도달(到達)하게 되는데 주맥(主脈)이 13.2%로 가장 높다. 2. 담배 원료(原料)의 상대습도별(相對濕度別)로 흡습되는 속도(速度)는 주맥(主脈)이 가장 빠르며 버어리종(種)은 느리다. 3. 황색종(黃色種)의 등급별(等級別) 함수분(含水分)의 변화(變化)는 후엽(厚葉) 1등(等) 3등(等) 5등(等)순이며 박엽(薄葉) 5등(等)이 가장 느리다. 이 같은 결과(結果)는 등급별(等級別)로 전당함량(全糖含量)과 관계(關係)가 깊은 것으로 추정(推定)된다. 4. 온습도별 흡습(吸濕) 시간(時間)에 따른 함수분(含水分)과의 관계(關係)는 황색종(黃色種) NC-82 (H. 3)과 버어리종(種) Br-21(H. 3)은 동일(同一)한 상대습도(相對濕度)에서 온도변화에 따라서 함수분(含水分)은 황색종(黃色種)이 버어리종(種)보다 높았고, 온도가 높을때 증가(增加)했다. 5. 잎담배 품종별(品種別) 수추출물(水抽出物)과 흡습능(吸濕能)과의 상관관계(相關關係)는 잎담배의 수추출물(水抽出物)이 많은 황색종(黃色種)이 버어리종(種) 보다 많았고 등급별(等級別)로는 1등(等)이 3등(等)보다 많았다. 6. 잎담배의 품종별(品種別), 등급별(等級別) 전당함량(全糖含量)과 흡습능의 상관관계는 전당함량이 많은 황색종(黃色種) 후엽(厚葉) 1등(等) 평형수분(平衡水分)이 높아, 전당(全糖)과 평형수분(平衡水分)과의 높은 정의 상관관계(相關關係)를 나타내었다.