• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.236-241
• /
• 2009

After analyzing the characteristics of the cooling dryer, the mixed cooling dryer was developed by adding the desiccant dryer which supplement the cooling dryer's demerits. Also, the hybrid desiccant cooling dryer was developed to use effectively the exhaust heat energy of the cooling dryer. It could make a more that 20 percent reduction in energy compared with the mixed desiccant cooling dryer. It has become essential to supply this equipment and search the suitable drying product.

• 한국안전학회지
• /
• 제10권4호
• /
• pp.3-8
• /
• 1995

Anchors find their use in providing tie-back resistance for submerged footings, transmission towers, tunnels and ocean structures. Laboratory model teats were performed for the short-term net ultimate uplift capacity of a circular anchors with respect to various embedment depths and moisture content in saturated bentonite. The tests have been conducted with the anchor at two different moisture contents. Based an the model test results, empirical relationships between the net load, rate of strain, and time have been developed. Test results are as follows. 1) In creep tests for load versus ultimate uplift capacity, the displacement of plate anchors rapidly increases during the primary stage but thereafter becomes constant over a period of time. 2) Displacement increased with the increase of the sustain load and embedded ratio in soil. 3) If the load is less than or equal to 75% of the short-term ultimate uplift capacity, a complete pullout does not occur due to creep.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.203-207
• /
• 2002

In order to evaluate the aging of mineral oil immersed distribution transformers, it gathered some insulation oil in over loaded and long time(exceed their service life, 13yrs.) aged transformers in the field, we measured moisture content, acid number, dielectric strength of the oil as defined in KS C 2101 standard. And also, it had been measured dielectric constant, specific resistant, $tan{\delta}$ on aged transformer oil at from $10^{\circ}C$ to $130^{\circ}C$. These results are compared with a new mineral oil. From this study, it can be considered that the analysis of mineral oil may be suitable for evaluation of life expectancy in distribution transformers

• Journal of Biosystems Engineering
• /
• 제31권5호
• /
• pp.416-422
• /
• 2006

Drying characteristics of green onion and onion during fluidized and fixed bed drying were investigated and compared. Sliced peen onion and onion were dried at drying air temperature of 45, 55, and $65^{\circ}C$. Drying air velocity during fluidized bed drying was adjusted with drying time at each drying temperature. Drying time to reach a given final moisture content was shorten in fluidized bed drying than in fixed bed drying - for drying temperature of 45, 55, and $65^{\circ}C$, the differences were 60, 60, and 50 min for green onion and 360, 180, and 60 min for onion. Drying constant (K) was greatly affected by drying method and drying temperature. Terminal velocity under fluidized bed drying was decreased exponentially for green onion and linearly (or onion with increase of drying temperature. Also, terminal velocity had linear relationship with moisture content for both green onion and onion.

• 한국식품영양과학회지
• /
• 제43권9호
• /
• pp.1407-1414
• /
• 2014

쌀가루, 고아밀로오스 전분, 분리대두단백, 설탕 및 소금을 첨가하여 feed 수분함량 19~23%, screw speed 200~400 rpm, feed rate 43.6 kg/hr 조건에서 제조한 쌀 스낵의 이화학적 특성을 분석한 결과는 다음과 같다. 쌀 스낵의 bulk density는 0.06~0.21, apparent density는 0.55~0.65 정도로 나타났고, feed 수분함량이 많을수록, screw 속도가 감소할수록 증가하는 경향을 보였다. 쌀 스낵의 팽화율은 density와는 반대로 feed 수분함량이 낮을수록, screw 속도가 증가할수록 증가하였다. 쌀 스낵의 WAI는 feed 수분함량이 많을수록, screw 속도가 감소할수록 증가한 반면, WSI는 WAI와는 반대의 경향을 나타냈다. 쌀 스낵의 breaking strength는 feed 수분함량이 증가할수록, screw 속도가 감소할수록 증가하였다. 쌀 스낵의 색도 중 L값은 feed 수분함량 19%, 21%에서는 screw 속도가 증가할수록 L값은 낮았으나, feed 수분함량 23%에서는 screw 속도에 따른 유의적인 차이는 없었다. a, b값은 feed 수분함량 19%에서는 screw 속도가 증가함에 따라 높아졌다. 쌀 스낵의 x-ray 회절도는 feed 수분함량이 낮을수록, screw 속도가 높을수록 회절강도가 낮게 나타났고, feed 수분함량 19%, 21%, screw 속도 300 및 400 rpm에서는 V 도형의 특징을 나타냈다. 쌀 스낵의 내부 단면구조는 feed 수분함량이 많을수록, screw 속도가 낮을수록 기공의 생성이 잘 되지 않았고 세포벽이 두껍게 나타났다.

• Journal of Biosystems Engineering
• /
• 제25권2호
• /
• pp.97-106
• /
• 2000

To develop the grain moisture meter using microwave free space transmission technique, a 10.5GHz microwave signal with the power of 11mW generated by an oscillar with a dielectric resonator is transmitted to an isolator and radiated from a transmitting $2{\times}2$ microstrip patch array antenna into the sample holder filled with the 12 to 26%w.b. of Korean Hwawung paddy rice. the microwave signal, attenuated through the grain with moisture, is collected by a receiving $2{\times}2$ microstrip patch array antenna and detected using a Shottky diode with excellent high frequency characteristic. A pair of light and simple microstrip patch array antenna for measurement of grain moisture content is designed and implemented on atenflon substrate with trleative dielectric constant of 2.6 and thickness of 0.54 by using Ensemble ver. 4.02 software. The aperture of microstrip patch arrays is 41 mm width and 24mm high. The characteristics of microstrip patch antenna such as grain. return loss, and bandwidth are 11.35dBi, -38dB and 0.35GHz($50^{\circ}$ at far-field pattern of E and H plane. The width of the sample holder is large enough to cover the signal between the antennas temperature and bulk density respectively. The calibration model for measurement of grain moisture content is proposed to reduce the effects of fluectuations in bulk density and temperature which give serious errors for the measurements . From the results of regression analysis using the statistically analysis method, the moisture content of grain samples (MC(%)) is expressed in terms of the output voltage(v), temperature (t), and bulk density of samples(${\rho}b$)as follows ;$$MC(%)\;=\;(-3.9838{\times}10^{-8}{\times}v^{3}+8.023{\times}10^{-6}{\times}v^{2}-0.0011{\times}v-0.0004{\times}t+0.1706){\frac{1}{{\rho}b}}{\times}100$ Its determination coefficient, standard error of prediction(SEP) and bias were found to be 0.9855, 0.479%w.b. and -0.0.369 %w.b. respectively between measured and predicted moisture contents of the grain samples.

• 한국식품과학회지
• /
• 제29권5호
• /
• pp.939-946
• /
• 1997

동진멥쌀 및 신선찹쌀전분 현탁액의 호화와 이들 전분겔의 저장중 재결정화에 대한 수분함량의 영향을 열적분석기기인 DSC로 측정, 분석한 결과 다음과 같은 결론을 얻었다. 전분의 호화는 찹쌀전분인 경우에 고온에서 일어났으며 상대적으로 큰 엔탈피를 나타내었고, 수분함량 60% 이상에서는 결정 용해 endotherm의 온도범위가 유사하였으나 수분함량이 감소함에 따라 온도범위가 커지고 고온으로 이동하였다. 두 전분겔의 재결정화 정도는 모두 수분함량 40%에서 최대로 나타났으며 수분함량 80% 이상에서는 거의 진행되지 않았다. 또한 Avrami식으로 분석한 재결정화 속도는 수분함량이 증가함에 따라 감소하였으며 찹쌀 전분겔의 재결정화 속도가 상대적으로 더 늦은 것으로 나타났다. 얼음 결정 용해엔탈피의 변화는 재결정화 속도와 유사한 결과를 나타내었으며, 동진쌀 및 신선찹쌀 전분겔의 Wg'은 각각 29.9% 및 28.2%로 나타났다.

• Fisheries and Aquatic Sciences
• /
• 제3권1호
• /
• pp.44-48
• /
• 2000

In order to utilize chum salmon returned in the east coast of Korea, the changes in the properties of Yeonual-jeot (salted salmon roe) fermented at different temperatures were measured for obtaining the basic data for its commercial production. Moisture content of salted salmon roe was significantly lower than raw salmon roe, while other proximate components were in the reverse. pH was constant for 56 days fermentation at $5^{\circ}C$, but decreased with fermentation Reriod at 10 and $15^{\circ}C$. The contents of amino-nitrogen and VBN were almost in constant at $5^{\circ}C$ up to 28 days of fermentation, but increased very slowly at $10^{\circ}C$ and moderately at $15^{\circ}C$. TBA value, and the numbers of total viable cells and lactic acid bacteria increased over all fermentation periods, more at higher fermentation temperatures.

• 대한가정학회지
• /
• 제27권3호
• /
• pp.29-38
• /
• 1989

The purpose of this study is to investigate the physiological respones and subjective wearing sensations of the body of different materials of underwears. Experimental underwears were round neck-line shirts made of 100% cotton (60's plain stitch), 100% untreated nylon and hydrophillic finished 100% nylon (140 D. tricot). Four healthy female served as subjects. The experimental chamber was controlled at a constant temperature (23±1℃), constant relative humidity (53±3%) and air velocity of 0.25m/sec. The skin temperature, rectal temperature, pulse rate, clothing climate of temperature and humidity, and subjective wearing sensations were measured every five minutes during 75min. The results showed the level of the fiber hygroscopic properties was most relevant in the sensations of wearing: thus, cotton and treated nylon were felt by the subjects as more confortable fabrics, than untreated nylon.

• KCI Concrete Journal
• /
• 제12권1호
• /
• pp.139-144
• /
• 2000

Ground Penetrating Radar (GPR) with 1 GHz antenna has been used to locate a steel bar embedded inside laboratory-prepared mortar specimens. Four mortar specimens are made with the dimensions of 100 cm (length) x 100 cm (width) x 14 cm (depth). One specimen had no bars and the other three specimens had a Dl9 steel bar at 4, 6. and 8 cm depth. As a part of the experimental work, the dielectric constants of mortar specimens are measured during curing. As the curing time increased. the dielectric constant decreased with decreasing moisture content inside the specimen. The steel bar embedded inside mortar specimens has been successfully identified in all three cases. The results using signal processing scheme developed in this study significantly improved the output of a commercially available radar system.