• Computers and Concrete
• /
• 제16권5호
• /
• pp.775-793
• /
• 2015

Moisture transport in concrete in atmospheric environment was studied in this paper. Based on the simplified formula of the thickness of the adsorbed layer, the pore-size distribution function of cement paste was calculated utilizing the water adsorption isotherms. Taking into consideration of the hysteresis effect in cement paste, the moisture diffusivity of cement paste was obtained by the integration of the pore-size distribution. Concrete is regarded as a two-phase composite with cement paste and aggregate, neglecting the moisture diffusivity of aggregate, then moisture diffusivity of concrete was evaluated using the composite theory. Finally, numerical simulation of humidity response during both wetting and drying process was carried out by the finite difference method of partial differential equation for moisture transport, and the numerical results well capture the trend of the measured data.

• 한국환경보건학회지
• /
• 제24권3호
• /
• pp.41-47
• /
• 1998

The purpose of this research is evaluation of adsorption capacity of the cast for TCE comparing with the yellow clay. Furthermore, the experimental data was fitted with the Langmuir and Freundlich isotherm and was found to be apllicable to the adsorption isotherm equation. The soil bed reactor used in this study was made of glass(10 cm in diameter, 100 cm in depth). The cast and yellow clay used as adsorbents were screened with 8-20 mesh mecanically. Results from Equilibrium test with adsorbents showed that the equibrium time of the cast and yellow clay was 9min independent of the amount of the adsorbents. The adsorption efficiencys of the cast and yellow clay for TCE was 66.3% and 56.2%, respectively. In the application of Freundlich isotherm, 1/n of the cast and yellow clay were 0.786 and 0.704, respectively. These results showed that the cast was more available than the yellow clay as TCE adsorbent. The best adsorption capacity was showed at 0% moisture content, 70 ppm inlet concentration and 25$^{\circ}$C temperature.

• 한국식품영양과학회지
• /
• 제45권8호
• /
• pp.1153-1161
• /
• 2016

흡습이 방지된 발효홍삼 농축액 알갱이를 제조하기 위해 홍삼의 지용성 추출액인 PSE(perfect soluble part in 70% ethanol)와 NSHW(not soluble part in hot water)를 70% 주정에 고형분 함량이 10%가 되도록 한 후 발효홍삼 농축액 알갱이를 유동하면서 이들을 발효홍삼 농축액 알갱이의 5%가 되도록 코팅하였다. PSE로 발효홍삼 농축액 알갱이를 코팅할 때 가장 중요한 인자는 feeding rate(FR)였고, NSHW는 FR${\times}$atomization air pressure(AP)임을 알 수 있었다. PSE와 NSHW를 이용하여 코팅된 발효홍삼 농축액 알갱이 제조 방법의 최적화 조건은 각각 FR 0.49 mL/min, AP 2.14 bar, product temperature(PT) $48.96^{\circ}C$에서 수율이 96.39%, FR 0.61 mL/min, AP 2.75 bar, PT $46.30^{\circ}C$에서 수율이 95.36%였다. 발효홍삼 농축액 알갱이의 용해성은 NSHW와 PSE로 코팅한 발효홍삼 농축액 알갱이가 코팅하지 않은 것보다 낮음을 알 수 있었다. 홍삼의 지용성 성분의 코팅이 발효홍삼 농축액 알갱이의 흐름성(편리성)에 크게 영향을 미치지 않았으나 흡습성은 방지되는 것을 알 수 있었으며 PSE보다 NSHW가 더 흡습방지에 효율적이었다. 총진세노사이드 함량은 홍삼의 지용성 성분으로 코팅하였을 때와 하지 않았을 때 통계적으로 차이가 없었지만, 지용성 성분을 코팅한 발효홍삼 농축액 알갱이의 진세노사이드 함량이 코팅하지 않은 발효홍삼 농축액 알갱이보다 진세노사이드 Rb1 함량은 높고 진세노사이드 Rg1의 함량은 낮은 값을 나타내었다. 관능특성 분석 결과 홍삼에서 분획된 지용성 추출물의 코팅은 손에 잘 묻지 않고 입안에서 잘 안 녹으며, 쓴맛이 오래가는 특징을 갖는 것을 알 수 있었다. 기호도 평가 결과 홍삼에서 분획된 지용성 추출물로 코팅한 발효홍삼 농축액 알갱이를 선호하지 않음을 알 수 있었다. 홍삼의 지용성 성분을 분획하여 제조한 PSE와 NSHW로 발효홍삼 농축액 알갱이를 코팅하였을 때 소비자들의 선호도는 낮았지만 흡습방지 효과는 높은 것을 알 수 있었다.

• 한국식품저장유통학회지
• /
• 제10권3호
• /
• pp.297-301
• /
• 2003

농산물의 저온저장 및 고습조건에서 안전하게 유통할 수 있는 골판지 포장상자를 개발하기 위하여 원지의 구성, 라이너의 발수도, 골형태의 차이에 따라 수분흡습 특성과 압축강도와의 관계를 구명하기 위해 각각 원지특성을 달리하여 이중 양면 골판지를 재료로 사용하여 시험하였다. 온도변화에 따른 골판지 함수율 변화는 골판지 원지 종류, 발수도 차이등에 관계없이 거의 일정한 값을 나타냈다. 상대습도 변화에 따른 골판지의 함수율 변화는 상대습도에 크게 영향을 받는 것으로 나타났으며 골판지의 수분흡습은 발수도 보다는 원지에 구성에 따라 영향을 많이 받는 것으로 나타났다. 또한 수직압축강도는 상대습도가 증가함에 따라 크게 감소하여 상대습도가 수직압축강도에 미치는 영향이 매우 크며 상대습도가 증가함에 따른 수직압축강도의 저하비율은 골판지의 종류에 관계없이 거의 같은 것으로 나타났다. 따라서 저온고습 조건에서 안전하게 내용물을 보호할 수 있는 저온유통용 농산물 골판지 상자의 개선을 위해서는 고품질 원지의 생산기술 개발 및 골판지 상자의 구조개선 연구가 우선되어야 할 것으로 판단된다.

• 한국대기환경학회지
• /
• 제26권3호
• /
• pp.286-297
• /
• 2010

This study deals with the effect of pretreatment on the $CO_2$ adsorption capacity of zeolitic adsorbents including a commercial A-type zeolite and cation exchanged adsorbents. The pre-heating could change the intrinsic properties such as specific surface area and adsorption capacity of the adsorbent. As a result of the experiment, the moisture previously filled inside might affect the potential adsorption capacity of the adsorbent, and could be disappeared throughout the heat treatment. An optimum pretreatment temperature for the test adsorbent was found to be $400^{\circ}C$, at which temperature enabled more than 90% refreshment. Precise examination through the TPD test showed that the TSA (Temperature Swing Adsorption) process would be desirable in dry adsorption of $CO_2$.

• 설비공학논문집
• /
• 제29권3호
• /
• pp.142-147
• /
• 2017

Improvement of the enthalpy exchange element's energy efficiency is of current interest from anenergy-saving viewpoint. In this study, a LiCl-impregnated spacer was devised as a means to improve the performance of the enthalpy exchange element. Two samples were tested : one with and one without impregnated spacers of $338{\times}338{\times}380mm$ sizes with 2.0 mm channel spacing. The results showed that the temperature efficiencies of the two samples were approximately the same. The humidity efficiency, however, was strongly affected by the LiCl impregnation. The impregnated sample yielded a 9% higher humidity efficiency under cooling and the difference increased to 14% under aheating condition. It was anticipated that more moisture would beadsorbed on the LiCl-impregnated spacers, which was delivered to their roots and eventually to the air in neighboring channels. Separate moisture adsorption tests revealed that both the adsorption rate and the amount of the adsorbed moisture are higher for the LiCl-impregnated specimen.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.138-139
• /
• 2020

With the rapid progress of industrialization, indoor air quality is a very important factor for modern people who spend most of their day indoors. The recent issue of fine dust and radon on the portal site's popularity search shows that interest in indoor air quality has increased. Fine dust causes respiratory diseases, and radon causes severe lung cancer. The new material was tested using plant activated carbon, palm activated carbon and bamboo activated carbon. Both palm activated carbon and bamboo activated carbon are porous materials and generate smooth physical adsorption. As a result of the experiment, both the activated carbon tends to gradually decrease in strength and fluidity as the replacement ratio increases. The reason for this is that both activated carbons have the property of absorbing moisture, so it is judged that the strength is lowered by absorbing moisture necessary for curing. In the case of fluidity, it is judged that the fluidity is reduced by absorbing the moisture required for the flow. In the future, if the problem of the color of the finished cured body is compensated, it will be possible to manufacture a functional finishing board to replace the existing interior finishing material.

• 한국연초학회:학술대회논문집
• /
• 한국연초학회 2005년도 제54회 학술발표회
• /
• pp.30-30
• /
• 2005

• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.401-406
• /
• 2015

게터는 반도체와 초소형 전자패키지 소자 내부의 수소와 수증기 같은 기체를 흡착하여 기기 작동 시 방해 기체를 제거하는 기능을 한다. 본 연구에서는 재료와 공정 측면에서 높은 가격 경쟁력을 갖는 게터로, 실리콘 기판에 올라간 다공성 알루미나 구조체를 제조하는 연구를 진행하였다. 기공의 크기가 조절된 양극산화 알루미나(AAO)는 높은 비표면적을 가지며 표면에 OH-기를 다수 포함하므로 높은 효율을 갖는 수분 흡착제로 사용되었다. 등온 수분 흡탈착 곡선으로 분석한 수분 흡착도는 상대습도 35%일 때 2.02%로 우수한 성능을 나타내었다. 즉, 저온에서 사용가능하며, 추가 열원이 필요하지 않아 박막구조의 소형화가 용이하여 내부 손상 및 오염을 방지할 수 있는 게터재를 합성하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제51권5호
• /
• pp.321-333
• /
• 2023

In this study, lignin, a lignocellulosic biomass, was chemically modified to produce polyethyleneimine-grafted lignin (PKL) with maximum hexavalent chromium [Cr(VI)] adsorption capacity. Changes in the physicochemical properties due to the cationization of lignin were confirmed through elemental analysis, Fourier transform infrared spectroscopy, and moisture stability evaluation. Alginate (Alg) beads containing PKL (Alg/PKL) were prepared by incorporating cationic lignin into the Alg matrix to apply the prepared PKL in a batch-type water treatment process. The optimal Alg/lignin mixing ratio was selected to increase the Cr(VI) adsorption capacity and minimize lignin elution from the aqueous system. The selected Alg/PKL beads exhibited an excellent Cr(VI) removal capacity of 478.98 mg/g. Isothermal adsorption and thermodynamic analysis revealed that the Cr(VI) removal behavior of the Alg/PKL beads was similar to that of heterogeneous chemical adsorption. In addition, the bulk adsorbent material in the form of beads exhibited adsorption behavior in three stages: surface adsorption, diffusion, and equilibrium.