• 마이크로전자및패키징학회지
• /
• 제18권2호
• /
• pp.17-27
• /
• 2011

본 논문에서는 솔더의 온도 변화에 따른 변형 거동을 평가하기 위하여 솔더 재료의 열변형 거동을 파악할 수 있는 전단시편을 고안하여 온도변화에 따르는 열변형 실험과 유한요소해석을 수행하였다. 전단시편은 열팽창계수가 다른 두 금속 막대와 그 사이 공간에 접합된 솔더로 구성되어 있으며, 솔더는 유연 솔더 (Sn/36Pb/2Ag)와 무연 솔더 (Sn/3.0Ag/0.5Cu) 두가지를 대상으로 하였다. 실시간 무아레 간섭계를 이용하여 세 온도 사이클 동안의 각 온도단계에서 변 위 분포를 나타내는 간섭무늬를 얻고 그로부터 온도에 따른 유연 솔더와 무연 솔더의 열변형 특성을 비교하였다. 유한요소해석을 통하여 여러 연구자가 제시한 솔더의 점소성 물성치를 평가하였으며 유연 솔더의 경우에는 Darveaux가 제안한 Anand 모델, 무연 솔더의 경우 Chang이 제안한 Anand 모델을 사용한 해석 결과가 실험 결과와 가장 일치한다는 것을 밝혔다. 평가된 재료 모델을 사용하여 무연 솔더와 유연 솔더가 포함된 전단시편을 유한요소 해석하고 솔더의 점소성 거동 을 자세하게 분석하였다.

• 대한치과보철학회지
• /
• 제30권3호
• /
• pp.457-478
• /
• 1992

Electrical resistance strain gauges, brittle-coatings, Moir'e fringe analysis, photoelasticity methods, etc, have been employed in the study of stress analysis and three-dimensional photoelasticity method used in this experiment. The author fabricated a total of 24 samples of maxillary and mandibular edentulous ridges with normal and sharp shapes using epoxy resin, one of the photoelastic materials. In addition, complete denture made from artificial resin teeth in other twoo sizes, large and medium size, were affixed to the specimens and attached to an articulator. The following results were attained by cutting 9 slice specimens into 6mm thick portions, in accordance with the three dimensional photoelastic stress freezing method, to analyze stress distribution status under specific static loading in the central, lateral and protrusive occlusions of the shape of edentulous ridge. 1. In the case of central occlusion, when complete resin artificial teeth in large and medium sizes were used on normal and sharp alveolar ridges, high stress distribution was broadly shown in the labio-buccal sides, and low and concentrated in the lingual sides, in all cases. Generally, the highest stresses were shown at the top of the alveolus, or at 2mm below the top of the alveolus, particularly in the specimen 2, 3, and stresses were more or less the same in the symmetrical right and left sides. 2. In the case of lateral occlusion, when the same load was applied, high stresses were shown broadly at the working sides in both the labio-buccal and lingual sides, and low and concentrated at the balanced sides. The highest stresses were shown in the top of the alveolus on the working sides in specimen 2 portion, and the lowest stresses at the balanced sides in specimen 6, slightly higher stresses were shown at retromolar parts in the balanced sides. 3. In the case of protrusive occlusion, high stresses were broadly shown at the labio-buccal sides, and slightly higher stresses at the top 2, 4, and 6mm parts of the alveolus with concentration. The highest stresses were shown in specimen No. 5 and the lowes stresses in specimen 1, 9 and stresses were more of less the same at the symmetrical right and left sides.