• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.171-174
• /
• 2000

In stead of RF module which has been used conventionally in many remote measurement applications, a new type of remote measurement system based on PCS(Personal communication system) and one chip Microcontroller is proposed in this work. PCS has many advantages with respect to cost reliability, communication quality, and so on. The proposed system consists of three different modules: PCS module, micro-controller module, and sensor module. System configuration as well as illustrative experiments will be described in detail.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.503-506
• /
• 2004

Evolutionary operation is useful to improve on-line full-scale manufacturing processes by systematically changing the levels of the process variables without jeopardizing the product. This paper presents a system design for an evolutionary operation software called 'evolutionary optimizer'. The system design is based primarily on data flow diagram. Evolutionary optimizer consists of four modules: factorial design module, many variables module, mixture Production module, and mean/dispersion module.

• 산업경영시스템학회지
• /
• 제20권43호
• /
• pp.219-228
• /
• 1997

The objective of this paper is to provide an alternative framework for the integration of process planning and scheduling in cellular manufacturing. The concept of an integrated cellular manufacturing system is defined and the system architecture is presented. In an integrated cellular manufacturing system, there are three modules : the process planning module, the manufacturing-cell design module, and the cell-scheduling module. For each module, the tasks and their activities are explained.

• 한국CDE학회논문집
• /
• 제14권2호
• /
• pp.69-76
• /
• 2009

The development of a simulation system requires many sub modules such as a dynamic module, a visualization module, etc. If a different freeware is used for each sub modules, it is hard to develop the simulation system by incorporating them because they use their own data structures. To solve this problem, a high-level data structure, called Dynamics Scene Graph Data structure (DSGD) is proposed, by wrapping data structures of two freeware; an Open Dynamics Engine (ODE) for the dynamic module and an Open Scene Graph (OSG) for the visualization module. Finally, to evaluate the applicability of the proposed data structure, it is applied to the block erection simulation in shipbuilding. The result shows that it can be used for developing the simulation system.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1506-1511
• /
• 2002

A computer aided expert system fur spur, helical, bevel and worm gears was newly developed by using AutoiCAD system and its AutoLISP computer language in the present study. Two methods are available for a designer to draw a gear. The first method needs the gear design parameters such as pressure, module, number of tooth, shaft angle, velocity, materials, etc. When the gear design parameters are inputted, a gear is drawn in AutoCAD system and maximum allowable power and shaft diameter are calculated additionally. The second method calculates all dimensions and gear design parameters to draw a gear when the information such as transmission, reduction ratio, nm, materials and pressure are inputted. The system includes four programs. Each program is composed of a data input module, a database module, a strength calculation module, a drawing module, a text module and a drawing edit module. In conclusion, the CAD system would be widely used in companies to find the geometric data and manufacturing course.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.1090-1095
• /
• 1992

This paper describes the systematic control method of process information transfer and machine cell control in FMS implementation. We have constructed an experimental FMS computer network and control system. The system hardware consists of host computer to manage process data and information transfer of machine cells, cell control computers to control machine cells(NC lathe, machining center). On the other hand, software is made up of oredr management module, NC program searching and generation module, NC part program error check module and cell control module. In this study, we could arrive at conclusion as following : The first, each task could be accomplihed by the efficient information transfer in hierachical computer network. The second, data base system of part programs and process control data is needed for the efficint information transfer and production management. Lastly, expansion of FMS control system could be achieved by the hierachical and decentralized computer control system.

• 한국IT서비스학회지
• /
• 제6권3호
• /
• pp.195-207
• /
• 2007

This study describes the design and implementation of web based collaborative learning system to improve interactivity among learners. Based on suggestions from previous studies, the system is composed of three main parts : the community module, the learning module, and the administrative module. The study participants were 254 university students from two different institutions. They were divided into 43 groups and asked to complete an online TOEIC preparation module using the learning system over 4 weeks. Survey data were collected at three points from each participant-before and 3 weeks after the beginning of the online module and at the completion of the module. The result indicates that the usage of this system is positively related to the learners' collaborative learning activities, the level of sense of community, and learner satisfaction both at the individual and group levels.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.352-361
• /
• 1998

The post-processing modules are parts of an integrated system for reinforced concrete structures. This modules are composed of two modules: member design module and calculation report module. The purpose of this paper is to develope modules that increase efficiency and usefulness of an integrated system used reinforced concrete structures design. The development of post-processing modules is necessary for user to design reinforced concrete structures conveniently and quickly. This modules are connected with central database for the benefit of storing amount of input/output data and being used system with little effort. Post-processing modules used Object-Oriented concepts and techniques include identity, classification, polymorphism, and inheritance. Member design module automatically converts no good members into satisfied members by changing section size or reinforcement bar arrangement. This module can be operated both independent member design modules with user input and a part of integrated system with database input. If user operates member design module, calculation report module is created automatically.

• 소성∙가공
• /
• 제12권6호
• /
• pp.550-557
• /
• 2003

In this study, a web-based system was developed by utilizing finite element method and virtual system designed using Virtual Reality Modeling Language (VRML). The simulation program for axi-symetric sheet forming is developed using finite flement method. The developed system consists of two modules, client module and server module. The client module was developed by using Active-X control. The input data for FEM calculation is transferred to the server module by using communication protocol. Then sever module performs several successive processes: input data generation, forming simulation, conversion of results to VRML format. After that, the results from the simulation can be visualized on the web browser in client computer. Besides, client module offers the capability to control and navigate on virtual forming machine and calculated result. By using this system simulation result can be investigated more realistically in virtual environment including forming machine.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.663-665
• /
• 1998

The purpose of this paper is development of portable cardiovascular signal processing device. Beat-to-beat fluctuation in heart rate, respiration, and blood pressure have been known to be meditated by autonomic nervous system activities convergent on various effector organs. This system consists of data acquisition module, main data processing module and graphic LCD module. The data acquisition module is developed for data aquisition, data multiplexing and interfacing with main data processing system. And, main data processing module is developed for data storing, data processing and interfacing with graphic LCD module. The main processing system is based on 32-bit microprocessor.