• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.93-97
• /
• 2003

This study conducted a basic study to develop ISM Code operation evaluation module, which is part of development of Safety Management System(ISM Code) Implementation supporting module. In particular, the significant of this study is that it established AHP operation evaluation analysis process, the design of questionnaire, and the hierarchical structure of operation evaluation model standard, focusing on the development of ISM Code operation evaluation module. Also, this study has its value in the point that it attempted to apply AHP scheme, which is part of the main decision-making in management science field, to develop operation evaluation module.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.672-676
• /
• 2009

Recently, intelligent surveillance camera systems are needed popularly. However, current researches are focussed on improvement of a single module rather than implementation of an integrated system. In this paper, we implemented a wireless surveillance camera system which is composed of face detection, and using motion sensor. In our implementation, we used a camera module from SHARP, a pair of wireless video transmission module from ECOM, a pair of ZigBee RF wireless transmission module from ROBOBLOCK, and a motion sensor module (AMN14111) from PANASONIC. We used OpenCV library for face dection and MFC for implement software. We identified real-time operations of face detection, PTT control, and motion sensor detecton. Thus, the implemented system will be useful for the applications of remote control, human detection, and using motion sensor.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.47-53
• /
• 2020

There is a need for a system that provides early warning of presence and type of failure of automobile wheel bearings through the application of predictive fault analysis technologies. In this paper, we presented a sensor module mounted on a wheel bearing and a diagnostic system that collects, stores and analyzes vehicle acceleration information and vibration information from the sensor module. The developed sensor module and predictive analysis system was tested and evaluated thorough excitation test equipment and real automotive vehicle to prove the effectiveness.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.6
• /
• pp.1007-1015
• /
• 2013

The automatic payment process of mobile phone micropayment system has not checked user's authentication. That is the structural vulnerability of mobile phone micropayment system. The malicious contents provider can cheat users and payment gateway through abusing the structural vulnerability. The payment gateway applies standard payment module after August, 2012 in order to solve the problem. But the standard payment module also has the vulnerability that makes damage of users. So the purpose of this paper is to suggest efficient improvement of standard payment module for user protection.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.141-168
• /
• 1997

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed Packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.181-183
• /
• 2003

This paper presents an operator training simulator for power system restoration against massive black-out. The system is designed especially focused on the generality and convenient setting up for initial condition of simulation. The former is accomplished by using on line calculation methodology, and PSS/E data is used to define the initial situation. The proposed simulator consists of three major components - the Power flow(PF) module, data conversion(CONV) module and CUI subsystem. PF module calculates power flow, and then checks overvoltage of buses and overflow of lines. CONV module composes an Y-Bus array and a data base at each restoration action. The initial Y-Bus array is constructed from PSS/E data. The user friendly GUI module is developed including graphic editor and built-in operation manual. As a result, the maximum processing time for one step operation is 15 seconds, which is adequate for training purpose. Comparison with PSS/E simulation proves the accuracy and reliability of the training system.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.3
• /
• pp.67-72
• /
• 2015

This paper proposes an object tracking system based on keypoints using homography in mobile environments. The proposed system is based on markerless tracking, and there are four modules which are recognition, tracking, detecting and learning module. Recognition module detects and identifies an object to be matched on current frame correspond to the database using LSH through SURF, and then this module generates a standard object information. Tracking module tracks an object using homography information that generate by being matched on the learned object keypoints to the current object keypoints. Then update the window included the object for defining object's pose. Detecting module finds out the object based on having the best possible knowledge available among the learned objects information, when the system fails to track. The experimental results show that the proposed system is able to recognize and track objects with updating object's pose for the use of mobile platform.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.3
• /
• pp.73-77
• /
• 2015

This paper proposes an object tracking system according to reliability assessment of learning in mobile environments. The proposed system is based on markerless tracking, and there are four modules which are recognition, tracking, detecting and learning module. Recognition module detects and identifies an object to be matched on current frame correspond to the database using LSH through SURF, and then this module generates a standard object information that has the best reliability of learning. The standard object information is used for evaluating and learning the object that is successful tracking in tracking module. Detecting module finds out the object based on having the best possible knowledge available among the learned objects information, when the system fails to track. The experimental results show that the proposed system is able to recognize and track the reliable objects with reliability assessment of learning for the use of mobile platform.

• Journal of Power Electronics
• /
• v.10 no.6
• /
• pp.769-776
• /
• 2010

The ultracapacitor module has recently been recast for use in hybrid energy storage systems (HESSs). As a result, accurate state-of-charge (SOC) estimation for an ultracapacitor module is as important as that of primary sources in order to be utilized efficiently in an energy storage system (ESS). However, while SOC estimation via the open-circuit voltage (OCV) method is generally used due to its linear characteristics compared with other ESSs, this method results in many errors in cases of highcurrent charging/discharging within a short time period. Accordingly, this paper introduces a dynamic SOC estimation algorithm that is capable of SOC compensation of an ultracapacitor module even when there is a current input and output. A cycle profile that simulates the operating conditions of a mild-HEV was applied to a vehicle simulator to verify the effectiveness of the proposed algorithm.

• The Journal of Korea Robotics Society
• /
• v.16 no.4
• /
• pp.291-298
• /
• 2021

In this study, we present a multi-sensor module for snake robot searching survivors in a narrow space. To this end, we integrated five sensor systems by considering the opinions of the first responders: a gas sensor to detect CO₂ gases from the exhalation of survivors, a CMOS camera to provide the image of survivors, an IR camera to see in the dark & smoky environment, two microphones to detect the voice of survivors, and an IMU to recognize the approximate location and direction of the robot and survivors. Furthermore, we integrated a speaker into the sensor module system to provide a communication channel between the first responders and survivors. To integrated all these mechatronics systems in a small, compact snake head, we optimized the positions of the sensors and designed a stacked structure for the whole system. We also developed a user-friendly GUI to show the information from the proposed sensor systems visually. Experimental results verified the searching function of the proposed sensor module system.