• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.5
• /
• pp.709-718
• /
• 2021

As regulations on environmental pollution of ships have been strengthened, interest in smart ships such as electric propulsion ships equipped with hybrid power systems is increasing. Since batteries used in electric propulsion ships have a larger capacity than batteries used in vehicles, the price is high and maintenance is considered important. The ship's battery is manufactured as an integral type and is managed by the battery management system, and the maintenance and repair of the battery is performed through the replacement of the battery. we design and implement a battery module and a control algorithm using pre-cell for easy battery management. In addition, a controller is designed to transmit the data necessary for the electric propulsion ship power system control to the power control system. When a battery to which the corresponding spare-cell is applied is used, the stability of the ship and the battery system is increased, and it can have an advantage in terms of maintenance and repair.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.65.2-65.2
• /
• 2010

Currently the variety of governmental business support and research for supplying solar energy have been actively progressed. As of now, however, There are no practical testing infrastructures of grid-connected photovoltaic system which test performance of solar power facility in domestic. Therefore, in KEPRI, there is in progress construction of practical testing ground of 500 kW class grid-connected PV System for developing the evaluation of the performance technology including the Module, PCS, and etc, that is the important instrument of the PV System, in Gochang area. It analyzed the site creation work for constructing the practical testing ground and new construction of control room and the unit standards, specifications and capacity of required equipment. For the system detailed design, configuration, instrument-specific parameters established, power generation predictions of Array Type and the components of testing ground are needed to build.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.44-45
• /
• 2011

Research on photovoltaic (PV) generation is taking a lot of attention due to its infinity and environment-friendliness with decrease of price per PV cell. While central inverters connect group of PV modules to utility grid in which maximum power point tracking (MPPT) for each module is difficult, micro inverter is attached on each module so that MPPT for individual modules can be easily achieved. Moreover, energy generation and consumption efficiency can be much improved by employing direct current (DC) distribution system. In this paper, a digitally controlled PV micro converter interfacing PV to DC distribution system is proposed. Boundary conduction mode (BCM) is utilized to achieve zero voltage switching (ZVS) of active switch and eliminate reverse recovery problem of passive switch. A 120W prototype boost PV micro converter is implemented to verify the feasibility and experimental results show higher than 98% efficiency at peak power and 97.29% of European efficiency.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.4
• /
• pp.629-634
• /
• 2013

This study aims to investigate a new structure for a concentrating photovoltaic (PV) module using a III-V compound semiconductor solar cellto solve the problems of existing concentrating PV modules and to explore a concentrating optical system with a flat structure, which shows remarkable advantages in terms of manufacturing cost, installation, and maintenance. This study should greatly contribute toward the development of concentrating PV modules. This study was performed to achieve an improvement in efficiency and economy and to implement an actual product. A new source of renewable energy is the only way in which countries that cannot produce oil can even emerge as an energy power. Therefore, this work can serve as a fundamental study that will help South Korea grow into a country that is a PV power generation force.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.169-172
• /
• 2005

Tiny camera module using in modern cellular phone requires precise assembly processes. Higher camera resolution and more functions such as zoom lens make the number of camera parts bigger. As market grows rapidly, automatic assembly process is required. However, diverse product line and short life cycle make it difficult. To attack this, a flexible and expandable lens assembly system is proposed. For the fast manufacturing line formation, modular concept is adopted. Also each module is designed to have intelligence to save system formation time. The assembly system is built up on the standard flat-form which provides vibration free base, air and electric supply, controllers, etc. Futhermore, the assembly cell has the capability of handling tiny, thin, or transparent parts which are very difficult to align with vision.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.21-24
• /
• 2008

In this paper, we introduce the status of concentration photovoltaic system. Currently, crystalline silicon solar has 90% of total solar market. But in a few years, the concentration solar system is expected to be main one because cost increasement of silicon material is not stabilized unit now. At 2012, it will take 5% of the whole solar market. Less expensive, material requirement and high system efficiency give high driving force for intensive research on concentration system. It is time for us to initiate the basic study and evaluate the long term stability compared to crystalline silicon system. The detail discussion will be shown in the following paper.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.478-483
• /
• 2000

In this study to cope with the decreasing product's life-cycle a virtual simulator to realize the simulation environment similar to a real manufacturing line is developed. The developed simulator plays a role in reducing the product conversion time by alternating manufacturing components and work plans on the simulation as manufacturing lines change and actuating a virtual manufacturing lines change and actuating a virtual manufacturing line before a real production. The developed simulator realized a virtual manufacturing line on the simulation using various manipulators and work cells as manufacturing components. Also It can be shown that the simulator can cope with rapid change of a manufacturing line by developing a interface that a separate process is managed for each manufacturing module and a manipulator component and a work cell are changed for a user to become convenient to teach tasks of each work module. using Microsoft Visual C++ 6.0 and OpenGL of Silicon Graphics for libraries to realize 3-dimensional graphic and constructing a database system, a hybrid type of hierachical and relational model to develop a progra that has efficiency and standardization.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.15-16
• /
• 2011

In this paper, I suggested the energy flexibility for photovoltaic energy. The cost for PV is surely high. But renewable energy is an one of the key solution for next energy resource. The latest technology needs more electricity. So many people are carrying more mobile charge in their batteries. Looking at the poor country people and nation, it is necessary to supply and share the advanced energy resources like photo voltaic. So in this open seminary I want to share the idea for this theme. The detail discussion will be shown in the following paper.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.12
• /
• pp.117-124
• /
• 1993

In this paper we propose a new thchnology mapping algorithm for multiplexer-based FPGA's The algorithm consists of three phases` First, it converts the logic functions and the basic logic mocule into BDD's. Second. it covers the logic function with the basic logic modules. Lastly, it reduces the number of basic logic modules used to implement the logic function after going through cell merging procedure. The binate selection is employed to determine the order of input variables of the logic function to constructs the balanced BDD with low level. That enables us to constructs the circuit that has small size and delay time. Technology mapping algorithm of previous work used one basic logic module to implement a two-input or three-input function in logic functions. The algorithm proposed here merges almost all pairs of two-input and three-input functions that occupy one basic logic module. and improves the mapping results. We show the effectiveness of the algorithm by comparing the results of our experiments with those of previous systems.

• KSBB Journal
• /
• v.15 no.5
• /
• pp.529-536
• /
• 2000

Results from experiments and mathematical modeling were compared for pervaporative butanol fermentation. The developed model includes expressions to predict characteristics of butanol fermentation, such as, microbial growth, solvent (butanol, acetone, and ethanol) formation and organic acid (acetate and butyrate) production. Butanol diffusivity was 1.15${\times}$10(sup)-7 ㎡/hr at 1.5 L/min-tubing of air flow rate using a pervaporative module. The model correlated well with experimental results (cell growth, glucose consumption and concentrations of solvents and organic acids) for batch fermentation with and without pervaporation. Larger surface area and thinner module tubing resulted in an increased glucose consumption and a decreased residual butanol concentration. Optimum membrane area and thickness were 0.34 ㎡ and 120 $\mu\textrm{m}$, respectively.