• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1419-1421
• /
• 1999

CADPAD program has been used as a distribution planning tool in KEPCO since 1989. In recent we've been upgraded the I/O modules. Now we analyze the key algorithm of FEEDERSITE module. The objective function is represented by the sum of the multiples of Power flow and cost. To minimize the objective function, it is used to Linear Programming algorithm. We will show this algorithm in this paper.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.243-249
• /
• 2003

With distribution industrial control system, the use of tow cost to achieve a highly reliable and safe system in real time distributed embedded application is proposed. This developed intelligent node is based on two microcontrollers, one for the execution of the application code, also as master controller for ensuring the real time control & the logic operation with PLD and other for communication task and the easy control execution, i.e., I/O digital input, digital output and interrupting. This paper also presents where the case NCS(Networked control system) with LonTalk protocol is applied for the filtration process control system of a small water treatment plant.

• Journal of information and communication convergence engineering
• /
• v.18 no.4
• /
• pp.267-277
• /
• 2020

It is important to understand the exact habitat distribution of endangered species because of their decreasing numbers. In this study, we build a system with a deep learning module that collects the image data of endangered animals, processes the data, and saves the data automatically. The system provides a more efficient way than human effort for classifying images and addresses two problems faced in previous studies. First, specious answers were suggested in those studies because the probability distributions of answer candidates were calculated even if the actual answer did not exist within the group. Second, when there were more than two entities in an image, only a single entity was focused on. We applied an object detection algorithm (YOLO) to resolve these problems. Our system has an average precision of 86.79%, a mean recall rate of 93.23%, and a processing speed of 13 frames per second.

• Annual Conference of KIPS
• /
• 2009.11a
• /
• pp.141-142
• /
• 2009

The PEFP (Proton Engineering Frontier Project) is constructing a 100MeV proton Linac (Linear Accelerator). The 20 MeV 20 mA proton beam has been serviced for an application in the fields of material, biological, information technology and medical sciences. For a stable and efficient acceleration of a proton beam, the control requirements must be optimized by studying various control methods. We propose that the integrated control system for the Linac machine components must be based on a distribution control method to improve a centralized control system. Based on EPICS (Experimental Physics and Industrial Control System) real-time software, the VME (Versa Module European package format) IOC (Input Output Controller) was developed under cross development environment with a RISC (Reduced Instruction Set Computer) PowerPC system. In this paper, we describe the design and implementation of distributed control system using the VME-based EPICS middleware for various components of the large proton accelerator.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.6
• /
• pp.630-640
• /
• 2001

In this paper, we describe the design and implementation of ObjectPeerWork, which is a framework for the development of shared object model-based P2P(Peer-to-Peer) applications. The shared object model can prevent the computing power decrease on the way of resource management by incorporating the resource management function into resources themselves, and raise reliability on shared resources by improving the security problems. Also this model assures expandability by means of distributed component-based request broker manager and module container. The ObjectPeerWork based on this shared object model is a framework which makes the implementation of the enterprise information system possible, and makes distribution of the computing power and efficient resource management possible by improving the weakness in the general P2P model.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.10
• /
• pp.1411-1417
• /
• 2015

The installation of PV system to the power distribution system is being increased as one of solutions for environmental pollution and energy crisis. However, the efficiency of PV system is getting decreased because of the aging phenomenon and several operation obstacles. Therefore, The technology development of aging diagnosis of PV modules are required in order to improve operation performance of PV modules. This paper proposes evaluation algorithm for aging state in PV modules by using the electrical characteristics of PV modules and environmental factors. And also, this paper presents a operation evaluation system of PV modules based on the proposed aging diagnosis algorithm of PV modules. From the simulation results of proposed evaluation system, it is confirmed that the proposed algorithm is a useful tool for aging diagnosis of PV systems.

• Journal of computational fluids engineering
• /
• v.21 no.2
• /
• pp.112-119
• /
• 2016

NEXTSat-1 is the next-generation small-size artificial satellite system planed by the Satellite Technology Research Center(SatTReC) in Korea Advanced Institute of Science and Technology(KAIST). For the control of attitude and transition of the orbit, the system has adopted a RHM(Resisto-jet Head Module), which has a very simple geometry with a reasonable efficiency. An axisymmetric model is devised with two coil-resistance heaters using xenon(Xe) gas, and the minimum required specific impulse is 60 seconds under the thrust more than 30 milli-Newton. To design the module, seven basic parameters should be decided: the nozzle shape, the power distribution of heater, the pressure drop of filter, the diameter of nozzle throat, the slant length and the angle of nozzle, and the size of reservoir, etc. After quasi one-dimensional analysis, a theoretical value of specific impulse is calculated, and the optima of parameters are found out from the baseline with a series of multi-physical numerical simulations based on the compressible Navier-Stokes equations for gas and the heat conduction energy equation for solid. A commercial code, COMSOL Multiphysics is used for the computation with a FEM (finite element method) based numerical scheme. The final values of design parameters indicate 5.8% better performance than those of baseline design after the verification with all the tuned parameters. The present method should be effective to reduce the time cost of trial and error in the development of RHM, the thruster of NEXTSat-1.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.5
• /
• pp.382-388
• /
• 2016

When Flat Panel Display (FPD) is made with backlight module, such as LED TV, it inherently suffers from the non-uniform backlight luminance problem that results in un-even brightness distribution throughout the TV screen. If the luminance of each pixel location of a TV screen as a function of the driving voltage can be measured, it can be used to compensate the non-uniformity of the backlight module. We use a carefully calibrated imaging system to take pictures of a TV screen at different levels of brightness and generate the compensation functions for the driving circuitry to correct the luminance level at each pixel location. Making use of the fact that the luminance of the screen is normally brightest at around the center of the screen and gradually decreases toward the border of the screen, the luminance of the whole TV screen is approximated by a mathematical function of the pixel locations. The parameters of the function are computed in the least square sense by the values of both the pixel luminance sent from the driving circuit and the grayscale value measured from the image taken by the imaging system. To justify the correction system, a simple second order polynomial function is used to approximate the luminance across the screen. When the driving circuit voltage is corrected according to the measured function, the variance of the screen luminance is reduced to one tenth of the one measured from the un-corrected TV screen.

• 사회경제평론
• /
• v.31 no.3
• /
• pp.29-53
• /
• 2018

This study provides a model of inter-Korean economic cooperation suggesting that economic cooperation should be centered on industrial cooperation. As an independent economic zone, the two Koreas will go through a gradual and functional process of cooperation. Also, economic convergence through 'openness and integration' of both markets is a pre-requisite of successful economic integration on the Korean peninsula. This success of the process requires industrialization of North Korea. This study suggests a model of 'the Corea Industrial Development Community on the Korean Peninsula. It aims to support industrialization of the North Korean economy as well as promotion of South Korea's SME competitiveness. It would help meet the demand for improvement of living conditions of North Korean people. Main policy measures includes: 1) co-effort to develop North Korea's provincial industrial zones, 2) upgrading North Korea's 'Jangmadang' into a highly efficient distribution market. Finally, through the construction of the Joint Industrial Development Zone, it is necessary to create a production sharing module for both Korea's industries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3435-3440
• /
• 2010

Unlike the electric method capable of checking only product defect, the real time optical metrology is suggested for measuring and visualizing vibration with respect to position of surface acoustic wave in RF device. The measuring limits and conditions for surface acoustic wave is given, and the interference and diffraction due to RF signal are analyzed by optical interpretation. A single mode laser and a 105MHz-center-frequency repeater filter were employed for experiments and theoretical analysis. In this paper, the optical metrology providing visual energy distribution and real time inspection for surface acoustic wave is proposed for development of high quality multi-service and multi-frequency RF module.