• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.97-103
• /
• 2018

In satellite communication, modulated beacon signal is spreaded by gold sequence and the modulated beacon is transmitted via linear phase modulation. Due to the difference in characteristics of the satellite and the receiver on the ground, frequency offset (FO) occurs. An existing modulated beacon receiver is a method of synchronizing the frequency of a modulated beacon signal using FFT(Fast Fourier Transform), which not only increases the delay and complexity in terms of system implementation but also has a separate circuit for compensating the phase difference due to FO and phase offset from FFT points. In order to overcome this problem, this paper proposes and analyzes a scheme for compensating and demodulating the coarse FO and phase offset at one time using the 2-phase shaped characteristics of the modulated beacon signal. Also, through the simulation, the modulation index suitable for the proposed method is analyzed and the appropriate cumulative number is also analyzed.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.215-224
• /
• 2003

This paper presents an electronic ballast using a novel complex modulation method for the metal halide lamp. The proposed modulation method, which has a modulating signal of swept complex frequency, can eliminate the acoustic resonance more effectively than the conventional modulation method, which has a modulating signal of constant frequency. For the purpose of future application specific integrated circuits (ASIC). the controller of the proposed ballast has been designed only with erasable programmable logic devices (EPLDs), but without a microprocessor. In this paper, detailed proposed modulation schemes are described and experimental results on the proto type 150W metal halide lamp ballast with the proposed modulation method ate discussed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.88-96
• /
• 2007

This paper discusses the fast modulation classifiers capable of classifying both analog and digital modulation signals in wireless communications applications. A total of 7 statistical signal features are extracted and used to classify 9 modulated signals. In this paper, we investigate the performance of the two types of fast modulation classifiers (i.e. 2 nearest neighbor classifiers and 2 minimum distance classifiers) and compare the performance of these classifiers with that of the state of the art for the existing classification methods such as SVM Classifier. Computer simulations indicate good performance on an AWGN channel, even at low signal-to-noise ratios, in case of minimum distance classifiers (MDC for short) and k nearest neighbor classifiers (kNNC for short). Besides a good performance, these type classifiers are considered as ideal candidate to adapt real-time software radio because of their fast modulation classification capability.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.1
• /
• pp.17-22
• /
• 2016

In relay networks, relay nodes amplify or demodulate/remodulate the received signal from the transmitter, and transmit that signal to the receiver. The received signals from several relays are combined and used for demodulation at the receiver, which enhances the performance of the overall system. Partially differential modulation scheme which uses coherent modulation at the relay and non-coherent modulation scheme at the receiver is adopted for modulation scheme. We analyze the performance of systems depending on various energy allocations of source and relays given the total energy in relay networks.

• Journal of the Optical Society of Korea
• /
• v.13 no.4
• /
• pp.434-438
• /
• 2009

In this paper, a 12.5-Gb/s optical transmitter is implemented using 0.13-${\mu}m$ CMOS technology. The optical transmitter that we constructed compensates temperature effects of VCSEL (Vertical cavity surface emitting laser) using auto-power control (APC) and auto-modulation control (AMC). An external monitoring photodiode (MPD) detects optical power and modulation. The proposed APC and AMC demonstrate 5$\sim$20-mA of bias-current control and 5$\sim$20-mA of modulation-current control, respectively. To enhance the bandwidth of the optical transmitter, an active feedback amplifier with negative capacitance compensation is exploited. The whole chip consumes only 140.4-mW of DC power at a single 1.8-V supply under the maximum modulation and bias currents, and occupies the area of 1280-${\mu}m$ by 330-${\mu}m$ excluding bonding pads.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2470-2480
• /
• 1996

The energy efficiency and bandwidth efficiency are two important criterion in designing a modulation scheme Especially the constant envelope property must be considered as in the non-linear channel tht exit, for example in the nonlinear amplifiers for satellite repeater. The Q$^{2}$AM(Quadrature Quadrature Amplitude Modulation) is a new modulation scheme which combines the Q$^{2}$PSK(Quadrature Quadrature Phase Shift Keying) scheme which increases the signal space dimension and the QAM scheme which increases the bandwidth efficiency using the multi-level signal. The Q$^{2}$AM scheme has by far superior spectrum efficiency compared with the existing modulation schemes. Applying this scheme in the non-linear communication system increses the bandwidth efficiency but cannot envelop property. In this paper, a new system architecture is suggested which satisfies the large spectrum efficiency and constant envelope property by implementing the linear block coding prior to the Q$^{2}$AM modulation. the system has improved in performance by gaining the constant envelope and the additional coding gain. We able to observe the performance improvement of the suggested system(at BER=10$^{-5}$ ) of 4.4 dB for the 16-QAM and 0.7 dB for the Q$^{2}$PSK under the exact spectrum efficiency.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.1-6
• /
• 2006

By comparing video-overlay method where digital and SCM signal are modulated in different optical source, we experimentally investigated the performance of simultaneous modulation of data and broadcasting signals using a single LD for broadcasting in PON based optical access network. The experimental results show that by increasing the minimum value of injected current for LD modulation above about 1.5 times of threshold current of LD, data and broadcasting signals can modulate without mutual interference. We also proposed and demonstrated the scheme of optical transmitter optimized for simultaneous modulation of data and broadcasting signals where anode and cathode of LD are separately used as signal interface for data and broadcasting signals, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.594-599
• /
• 2001

The symbol rate which is the main feature of NRZ information signal is detected by DAM (Delay-And-Multiplier) receiver. It is important for secure communication to reduce the normalized output SNR which is calculated at the DAM output as a measure of detectability. In this paper, we use the signal which is modulated by the class of MSK modulation schemes as the input signal of the DAM receiver for analyzing LPI performance and the GMSK(BT=0.3) used in GSM system is highlighted. Consequently, GMSK which has better bandwidth efficiency than other modulation schemes(BPSK, QPSK, OQPSK, and MSK) has better LPI performance compared with other ones. To compare the performances of each modulation scheme fairly, the transmitted powers of each system are set to be same within useful bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.5
• /
• pp.229-236
• /
• 2014

Quadrature Amplitude Modulation (QAM) is widely used in contemporary wired and wireless communications systems. In this paper, I propose a generalized triangular quadrature amplitude modulation (gTQAM) that includes the square quadrature amplitude modulation (SQAM), TQAM, and ${\Theta}$-QAM as special cases. Therefore, the proposed gTQAM forming a lattice of arbitrary triangles provides a versatile structure in signal constellations compared to other QAM schemes. For M-ary gTQAM, I derive an exact closed-form expression for the bit error rate (BER), and present the optimal signal constellations for given SNR values from the derived BER expression. Finally, I validate the derived BER results through computer simulations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.11
• /
• pp.3761-3779
• /
• 2022

The performance of existing recognition algorithms for binary phase shift keying (BPSK) and quadrature phase shift keying (QPSK) signals degrade under conditions of low signal-to-noise ratios (SNR). Hence, a novel recognition algorithm based on features in the graph domain is proposed in this study. First, the power spectrum of the squared candidate signal is truncated by a rectangular window. Thereafter, the graph representation of the truncated spectrum is obtained via normalization, quantization, and edge construction. Based on the analysis of the connectivity difference of the graphs under different hypotheses, the sum of degree (SD) of the graphs is utilized as a discriminate feature to classify BPSK and QPSK signals. Moreover, we prove that the SD is a Schur-concave function with respect to the probability vector of the vertices (PVV). Extensive simulations confirm the effectiveness of the proposed algorithm, and its superiority to the listed model-driven-based (MDB) algorithms in terms of recognition performance under low SNRs and computational complexity. As it is confirmed that the proposed method reduces the computational complexity of existing graph-based algorithms, it can be applied in modulation recognition of radar or communication signals in real-time processing, and does not require any prior knowledge about the training sets, channel coefficients, or noise power.