• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.249-250
• /
• 2006

In this paper, hardware design and implementation of digital controller for the High Precision Digital Power Supply (HPDPS) based on Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA) is presented. Developed digital controller is composed of high resolution Digital Pulse Width Modulation (DPWM) and high resolution analog to digital converter circuit with anti-aliasing filter. And Digital Signal Processor (DSP) has the capability of a few micro-second calculation time for one feedback loop. 32-bit DSP and DPWM with 150[ps] step resolution is used to implement the HPDPS. Also 18-bit 2 mega sample per second ADC board is adopted for the developed digital controller. Also, hardware structure of the developed digital controller and experimental results of the first prototype board for HPDPS is described.

• Journal of the Korean Chemical Society
• /
• v.21 no.4
• /
• pp.270-275
• /
• 1977

A rate constant is deduced for the reaction of tert-butoxy radicals and trimethylsilane from the measurement of the phase shift between the modulated light source and the ESR signal of trimethylsilyl radical. The rate constant was found to $3{\times}10^{-2}M^{-1}{\cdot}sec^{-1}$ at $-50^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.189-191
• /
• 2006

This paper analyzes effect of the spinning vehicle on the GPS signal. In rapid spinning vehicles such as missiles and space rockets, carrier phase and frequency depend on the roll rate of the vehicle. It induces phase and frequency modulation caused by the roll rate. The modulated phase and frequency increase dynamic stress error of the tracking loop. Even though higher order tracking loop can remove dynamic stress error, the dynamic stress error can not be remove in this case. In order to analyze the effect of the spinning vehicle on the GPS signal, the experiments are carried out. The experiment results show the modulation of the carrier frequency and phase caused by the roll rate of the spinning vehicle.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1428-1431
• /
• 2002

It is general opinion that the future mobile multimedia networks will use different standards and a prospective solution to this problem will be software defined radio (SDR) techniques. SDR provides the flexibility to support multiple air interfaces and signal processing functions at the same time. Especially, digital signal processors and FPGAs are widely used for implementation of these adaptive and flexible functions of a baseband modem for SDR applications. Also, it is known that the modulation schemes of OCQPSK (Orthogonal Complex QPSK) and HPSK (Hybrid PSK) are used for IMT-2000 services of cdma2000 and WCDMA, respectively. Thus, in this paper, we design and implement an OCQPSK / HPSK modem using a DSP chip of Texas Instrument's TMS320C6701. One modulation scheme is operated by adaptive selection between the two schemes and 5 physical traffic channels differentiated by orthogonal codes are implemented in one DSP chip and each channel has 1Mbps data rates and 8Mcps chip rates.

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.55-60
• /
• 2007

Possibility of the eavesdropping is investigated on a conference room-glass window coupled system. Speech intelligibility analysis is performed on the eavesdropping sound of the glass window. Using MLS(Maximum Length Sequency) signal as a sound source, acceleration and velocity responses of the glass window are measured by accelerometer and laser doppler vibrometer. MTF(Modulation Transfer Function) is used to identify the speech transmission characteristics of the room and window system. STI(Speech Transmission Index) is calculated by using MTF and speech intelligibility of the vibration sound is estimated. Speech intelligibilities by the acceleration signal and the velocity signal are compared.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.5
• /
• pp.499-504
• /
• 2011

In this paper, we suggest a method for discretized frequency modulations of ultrasonic signals. A continuous sweep of frequency modulation signals can be modelled with fine levels of discretization. If the ultrasound signals are modulated with monotonically decreasing frequencies, then the cross-correlation between an emitted signal and received signal can be used to identify the distance of multiple target objects. For the discretized frequency synthesis, CF ultrasounds with different frequencies are serially ordered. The auto-correlation test with the signal shows effective results for distance estimation. The discretized frequency syntheses have better distance resolution than CF ultrasound signals and the resolution depends on the number of the combined ultrasound frequencies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.4
• /
• pp.286-294
• /
• 1990

The objective of this paper lies in presenting in theory an interpretation of how signals are detected from the real-time A/O correlator, and scrutinize by experimental processes, thereby to devise a method by which correlation function can be detected in a favorable way in time. An A/O system for real-time correlation function of two signals has been constructed. This optical correlator when at work in intensity modulation mode by acousto- optic device renders higher output signal to noise ration, as compared with the traditional optical signal detection, has simple system as compared with existing optical correlator in amplitude modulation mode.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.5
• /
• pp.591-596
• /
• 1986

A binary continuous phase frequency shift keying (CPFSK), whose phase is a continuous function of time and instantaneous frequency is constant, is a bandwidth efficient constant envelope signalling scheme. A transmitting signal is formed by combined coding of a convolutional encoder and a binary CPFSK modulator. The signal is transmitted throuth additive white Gaussian noise(AWGN) channel. If the received signal is detected by a coherent maximum likelihood(ML) receiver, error probability can be expressed approximately in terms of minimum Euclidean distance. We propose rate 2/4 codes for the improvement of error performance without increating the data rate per bandwidth and the receiver complexity. Its minimum Euclidean distances are compared with those of rate \ulcornercodes as a function of modulation index and observation interval.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.2
• /
• pp.42-52
• /
• 1990

A method of measuring impulse response of acoustic system, two kinds of cross-correlation methods (the direct correlation method and the M-sequence modulation correlation method) were applied. According to the direct correlation method, by using stationary random noise source and by calculating the cross-correlation function between the sourece and the output signal, equivalent impulse response can be obtained not being influenced by the back ground noises. By applying this method, the measurement of echo-time patterns in rooms and oblique incident sound absorption characteristics of sound absorbing materials was carried out. In the case of the M-sequence modulation correlation method which was contrived by Aoshima, an intermittent random nosie modulated by M-sequence signal is used as the source signal, and the cross-correlation function between the M-sequence signal and the squared output signal is calculated. According to this method, equivalent energy impulse response (squared impulse response) of te propagation system can be obtained without being influenced by the back ground noises and the air fluctuation caused by wind. As the applcaition of this measuring method to the architectural acoustics, the meaurements of echo-time patterns, reverberation decays and sound pressure lev디 distributions in rooms and sound insulation efficiencies in buildings were carried out. From these experimental studies, it has been found that this M-sequence modulation correlation method is markedly useful especially for the field masurement of sound insulation under high back ground noise condition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1181-1188
• /
• 2007

This paper presents the measured signal performances in the urban environment for the DVB-H parameters such as code rate, burst size, FFT mode and modulation technique to analyze the DVB-H signal performance avaible for the embodiment of single frequency network to improve the frequency efficiency. Measurements were performed for the case for applying and non-applying MPE-FEC technique simultaneously. Results show that the most outstanding performance are found in the case of QPSK modulation, 1/2 code rate, 2 k FFT mode and 512 burst size. In addition, the signal performance by the SFN with 1/8 guard interval becomes superiour in comparision with the measured data from each site and the data from SFN with 1/32 guard interval. The analysis of the results can be instructive for the improvement of the signal performance and broadcasting quality for the terrestrial digital mobile broadcasting service.