• Title/Summary/Keyword: Modulation code

Search Result 457, Processing Time 0.025 seconds

A Simplified Decoding Algorithm Using Symbol Transformation for Turbo Pragmatic Trellis-Coded Modulation

  • Choi, Eun-A;Oh, Deock-Gil;Jung, Ji-Won;Kim, Nae-Soo;Kim, Young-Wan
    • ETRI Journal
    • /
    • v.27 no.2
    • /
    • pp.223-226
    • /
    • 2005
  • This paper presents the application of a turbo coding technique combined with a bandwidth efficient method known as trellis-coded modulation. A transformation applied to the incoming I-channel and Q-channel symbols allows the use of an off-the-shelf binary/quadrature phase shift keying (B/QPSK) turbo decoder without any modifications. A conventional turbo decoder then operates on transformed symbols to estimate the coded bits. The uncoded bits are decoded based on the estimated coded bits and locations of the received symbols.

  • PDF

Joint Performance of Demodulation and Decoding with Regard to Log-Likelihood Ratio Approximation (대수우도비 근사화에 따른 복조와 복호의 결합 성능)

  • Park, Sung-Joon;Jo, Myung-Suk
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.41 no.12
    • /
    • pp.1736-1738
    • /
    • 2016
  • In modern digital communication systems adapting high-order modulation and high performance channel code, log-likelihood ratios involving the repeated calculations of the logarithm of sum of exponential functions are necessary for demodulation and decoding. In this paper, the approximation methods called Min and MinC are applied to demodulation and decoding together and their complexity and joint performance are analyzed.

Performance of VLC-CDMA Communication System Using LED (LED를 이용한 VLC-CDMA 통신 시스템 성능 분석)

  • Bae, Su-Jin;Hong, Yeong-Jo;Lee, Kye-San
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.8 no.2
    • /
    • pp.83-90
    • /
    • 2009
  • White LEDs(Light Emitting Diode) offer advantageous properties such as high brightness, improved reliability, lower power consumption, and long lifetimes. An LED is an electronic device that converts an electrical signal into a tight signal and is used not only in Optical Communication Indoor wireless optical illuminating rooms, but also for wireless optical communication systems. Currently, studies about these white LEDs have been being progressed, and in this raper, we discuss the multiplex and the multiple access method of VLC(Visible Light Communication) systems using white LEDs. In proposed system, CDMA(Code Division Multiple Access) apples to VLC system to reduce interference of VLC system, and improve capacity. The superiority of OOK modulation is presented in analysis of results by comparing VLC-CDMA communication system using OOK(On-off keying) modulation and BPSK modulation in AWGN(Additive White Gaussian Noise) channel and Diffuse channel. And we investigate the significance of a solution of interference by multipath by comparing BER in multipath channel and AWGN channel. In the proposed system, we assume Directed LOS(Line Of Sight) and Diffuse Link, and suppose VLC-CDMA using OOC(Optical Orthogonal Code) as methods to increase efficiency of system by removing ISI(Inter Symbol Interference) caused by multiple access, optical spreading code, and also present an analysis of its performance.

  • PDF

Modulation Code for Removing Error Patterns on 4-Level NAND Flash Memory (4-레벨 낸드 플래시 메모리에서 오류 발생 패턴 제거 변조 부호)

  • Park, Dong-Hyuk;Lee, Jae-Jin;Yang, Gi-Ju
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.12C
    • /
    • pp.965-970
    • /
    • 2010
  • In the NAND flash memory storing two bits per cell, data is discriminated among four levels of electrical charges. We refer to these four levels as E, P1, P2, and P3 from the low voltage. In the statistics, many errors occur when E and P3 are stored at the next cells. Therefore, we propose a coding scheme for avoiding E-P3 or P3-E data patterns. We investigate two modulation codes for 9/10 code (9 bit input and 5 symbol codeword) and 11/12 code (11 bit input and 6 symbol codeword).

Performance Analysis of PCM Cell Search Algorithm for Fast Cell Search in WCDMA Systems (WCDMA. 시스템에서 빠른 셀 탐색을 위한 극성 변조 셀 탐색 알고리즘의 성능 분석)

  • 배성오;임재성
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.28 no.8A
    • /
    • pp.598-606
    • /
    • 2003
  • In this paper, we analyze the performance of the PCM cell search algorithm proposed for fast cell search of WCDMA systems. In order to improve both performance and complexity of the cell search algorithm standardized for WCDMA systems the PCM scheme uses a group of the polarization codes produced by a Gold code generator. The PCM scheme only uses one synchronization channel since the polarization codes modulated on P-SCH can replace the RS codes of S-SCH. Thus, the PCM reduces the BS's transmission power since only one synchronization channel can be used, and it can also reduce the complexity of receiver as compared with the conventional one. In this paper, by defining a numerical model, we analyze the performance of the PCM cell search algorithm in terms of detection probability and mean acquisition time. Consequently, we could demonstrate that the PCM cell search algorithm is superior to the standard WCDMA cell search algorithm.

Design and Performance Evaluation of OFDM-CDIM System Using Multiple Modes (다중 모드를 사용하는 OFDM-CDIM 시스템 설계와 성능 평가)

  • An, Changyoung;Ryu, Heung-Gyoon
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.29 no.7
    • /
    • pp.515-522
    • /
    • 2018
  • An orthogonal frequency division multiplexing with coded direct index modulation(OFDM-CDIM) system that can achieve higher performance and spectral efficiency than previous OFDM systems is proposed. Previous OFDM with index modulation(IM) and OFDM-IM using dual modes systems allocate additional data to indices of respective subcarriers through combining operation with high complexity and then transmit them. However, the proposed system directly allocates the mode selection information to each subcarrier without performing additional operations. Then, the system selects and transmits one symbol in the selected mode. Furthermore, only the data allocated to the index of the subcarrier is encoded, and a good performance improvement effect is obtained with a high code rate. Simulation results show quantitatively that an OFDM-CDIM system using four modes improves bit error rate performance and transmission efficiency in additive white Gaussian noise and Rayleigh fading channel environments compared with a conventional OFDM system using 4-ary quadrature amplitude modulation.

Multi-code Biorthogonal Code Keying with Constant Amplitude Coding using Interleaving and $Q^2PSK$ for maintaining a Constant Amplitude feature and increasing Bandwidth Efficiency (정 진폭 부호화된 Multi-code Biorthogonal Code Keying 시스템에서 인터리빙과 $Q^2PSK$를 이용하여 정 진폭 특성을 유지하면서 대역폭 효율을 개선시키는 방안)

  • Kim, Sung-Pil;Kim, Myoung-Jin
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 2005.08a
    • /
    • pp.427-430
    • /
    • 2005
  • A multi-code biorthogonal code keying (MBCK) system consists of multiple waveform coding blocks, and the sum of output codewords is transmitted. Drawback of MBCK is that it requires amplifier with high linearity because its output symbol is multi-level. MBCK with constant amplitude precoding block (CA-MBCK) has been proposed, which guarantees sum of orthogonal codes to have constant amplitude. The precoding block in CA-MBCK is a redundant waveform coder whose input bits are generated by processing the information bits. Redundant bits of constant amplitude coded CA-MBCK are not only used to make constant amplitude signal but also used to improve the BER performance at the receiver. In this paper, we proposed a transmission scheme which combines CA-MBCK with $Q^2PSK$ modulation to improve bandwidth efficiency of CA-MBCK and also uses chip interleaving to maintain a constant amplitude feature of CA-MBCK. bandwidth efficiency of a proposed transmission scheme is increased fourfold. And the BER performance of the scheme is same as that of CA-MBCK.

  • PDF

Energy Efficiency for Building Security Application of Adaptive Error Control and Adaptive Modulation (빌딩 보안 어플리케이션의 적응 오류제어와 적응 변조의 에너지 효율에 관한 연구)

  • Long, Bora;Kang, Heau-Jo
    • Journal of Advanced Navigation Technology
    • /
    • v.11 no.4
    • /
    • pp.423-429
    • /
    • 2007
  • Since the wireless smart card has played a main role in the identification security application for the building access; this research has its purpose to improve the performance of the smart card system and aims to offer more convenient to user. The contactless cards do not require insertion into a card reader and can work up to centimeters away from the reading device. To be able to cope with this performance the controlling of power consumption through the adaptive modulation and error control is needed. This paper addresses a forward error control (FEC) scheme with the adaptive Reed-Solomon code rate and an M-ary frequency shift keying (M-FSK) modulation scheme with the varying symbol size M over the link. The result of comparing energy efficiencies of adaptive error correction and adaptive modulation to other various static schemes shows to save over 50% of the energy consumption.

  • PDF

Transmitted Reference UWB Systems Based on Block-Coded Modulation (블럭부호변조 기반의 Transmitted Reference 광대역 통신 시스템)

  • Min, Seungwook
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.38A no.3
    • /
    • pp.289-293
    • /
    • 2013
  • In the noncoherent methods for UWB-IR (ultra-wideband impulse radio), block coded modulation (BCM) is better than the transmitted reference (TR) systems in terms of the energy efficiency and data rate. However, even BCM suffers from the performance degradation in the presence of strong inter-frame interference and inter symbol interference. We propose the transmitted reference based on the BCM (TR-BCM) which is the hybrid system of TR and BCM. Performance evaluation shows that the performance of TR-BCM is better than that of BCM in the high SNR range.