• 한국산학기술학회논문지
• /
• 제12권1호
• /
• pp.493-499
• /
• 2011

기존의 직교변조 (Orthogonal Modulation)는 그 효용성에 비해 대역폭 효율이 지나치게 떨어져 이를 개선하기 위한 다중부호 트랜스직교변조 (MCTO: Multi-Code Trans-Orthogonal Modulation)가 제안되었다. 그러나 MCTO 변조는 송신신호의 진폭이 일정하게 유지되지 않아 RF (Radio Frequency) 단에 포함되어 있는 전력 증폭기 (Power Amplifier)의 부담이 커지게 되는 문제점이 있다. 따라서 본 논문에서는 다중부호 신호를 정진폭으로 부호화하는 방식을 이용한 정진폭 다중부호 트랜스직교변조 (CAMCTO: Constant-Amplitude Multi-Code Trans-Orthogonal Modulation)를 제안한다. 또한 제안된 CAMCTO 변조의 성능을 실험을 통해 제시하고 기존의 직교변조 및 MCTO 변조와 비교한다. 실험 결과에 의하면 제안된 CAMCTO 변조는 기존의 직교변조에 비해 대역폭 효율은 매우 증가하며 MCTO 변조에 비해 RF의 부담을 매우 경감시킬 수 있음을 알 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.13-16
• /
• 2002

This paper presents a new baseband modulation system for the reception improvement of VSB system in dynamic multipath channel. By introducing the 1/2 Trellis Coded Modulation in baseband modulation, the TOV of proposed modulation is improved very much compared with 8-VSB modulation and better than the pseudo 2-VSB modulation of Philips which is the most robust modulation for VSB transmission system as far. Through the computer simulation, the performance of the proposed modulation is examined and the results are shown.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.365-373
• /
• 2010

This paper proposes a hybrid single carrier sinusoidal modulation suitable for multiphase multilevel inverters. Multiphase multilevel inverters are controlled by hybrid modulation to provide multiphase variable voltage and a variable frequency supply. The proposed modulation combines the benefits of fundamental frequency modulation and single carrier sinusoidal modulation (SC-SPWM) strategies. The main characteristics of hybrid modulation are a reduction in switching losses and improved harmonic performance. The proposed algorithm can be applied to cascaded multilevel inverter topologies. It has low computational complexity and it is suitable for hardware implementations. SC-SPWM and its base modulation design are implemented on a TMS320F2407 digital signal processor (DSP). A Complex Programmable Logic Device realizes the hybrid PWM algorithm and it is integrated with a DSP processor for hybrid SC-SPWM generation. The feasibility of this hybrid modulation is verified by spectral analysis, power loss analysis, simulation and experimental results.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1480-1489
• /
• 2017

In this study, a carrier-based pulse-width modulation (PWM) method for two-level voltage source inverters in the over-modulation region is proposed. Based on the superposition principle, the reference voltage vectors outside the linear modulation boundary are adjusted to relocate to the vector hexagon, while their fundamental magnitudes are retained. In accordance with the adjusted reference vector, the corresponding modulated waves are respectively deduced in over-modulation mode I and II to generate the gate signals of the power switches, guaranteeing the linearity of the fundamental output phase voltage in the over-modulation region. Moreover, due to the linear relationship between the voltage vector and the duty ratios, the complicated sector identification and holding angle calculation found in previous methods are avoided in the modulated wave synthesis, which provides great simplicity for the proposed carrier-based over-modulation strategy. Experimental results demonstrate the effectiveness and validity of the proposed method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1157-1159
• /
• 2003

The effect of the scan velocity modulation is studied. The effect of the velocity modulation on the picture image is judged from the intensity profile of the image. The intensity profile is obtained as time integral of moving Gaussian beam. To confirm the applicability of this integral formula, the measurement and simulation data is compared. And by calculating the intensity profile for different amounts of velocity modulation, the optimum modulation displacement that gives the best image quality is obtained. This optimum modulation displacement can be used in designing scan velocity modulation system.

• 한국통신학회논문지
• /
• 제41권1호
• /
• pp.89-91
• /
• 2016

본 논문은 광 무선통신에서 Subcarrier Intensity Modulation(SIM)에 Spatial Modulation(SM)을 결합한 시스템의 전송률을 향상시키기 위해 고차 변조방식을 적용하는 방법을 제안한다.

• Journal of Power Electronics
• /
• 제9권3호
• /
• pp.481-490
• /
• 2009

This paper describes a SVPWM overmodulation scheme of NPC type three-level inverter for traction drives which extends the modulation index from MI=0.907 to unity. SVPWM strategy is organized by two operation modes of under-modulation and over-modulation. The switching states under the under-modulation modes are determined by dividing them with two linear regions and one hybrid region the same as the conventional three-level inverter. On the other hand, under the over-modulation mode, they are generated by doing it with two over-modulation regions the same as the conventional over-modulation strategy of a two level inverter. Following the description of over-modulation scheme of a three-level inverter, the system description of a vector controlled induction motor for traction drives has been discussed. Finally, the validity of the proposed modulation algorithm has been verified through simulation and experimental results.

• 대한전기학회논문지
• /
• 제41권6호
• /
• pp.615-624
• /
• 1992

For the operation of the resonant DC link inverters, only limited number of modulation techniques such as the delta modulation and instantaneous current control techniques have been suggested. However, these modulation techniques have some limitations in practical operation. In this paper, the application of conventional inverter modulation techniques is suggested for the control of the resonant DC link inverter. The harmonic analysis results are presented. The results show that these modulation techniques offer good output characteristics similar to conventional inverter PWM techniques for the operation of the resonant DC link inverter. This implies that not only the delta modulation technique and instantaneous current control techniques but also various other modulation techniques can be applied to the operation of the resonant DC link inverter. This also indicates that open loop control as well as closed loop control can be used for the operation of the resonant inverter. The resonant DC link inverter with various modulation strategies is implemented using V-40 microprocessors.

• 한국통신학회논문지
• /
• 제30권3C호
• /
• pp.69-76
• /
• 2005

본 논문에서는 다중 부호 신호 (MC: multi-code signal)를 정 진폭으로 전송하는 정 진폭 이진 직교 다중 부호 변조 방식 (CABM: constant-amplitude biorthogonal multi-code modulation)을 제안한다. 정 진폭을 유지하기 위해 제안된 CABM 방식에서는 잉여 비트를 사용하여 신호를 부호화 하였다. 제안된 CABM 변조 방식은 매우 높은 스펙트럼 효율을 지원할 수 있다. 또한 본 논문에서는 제안된 CABM 신호를 복조하기 위한 다양한 복조 방식들을 제시하고 기존의 정 진폭 직교 변조 방식 (CAOM: Constant-amplitude orthogonal multi-code modulation)과 그 성능을 비교한다. 제안된 CABM 변/복조 방식은 고속 데이터 율을 제공해야 하는 디지털 무선 통신 시스템으로 사용될 수 있다.

• 대한전자공학회논문지
• /
• 제12권6호
• /
• pp.1-4
• /
• 1975

임팻다이오드의 임지던스크기가 연류에 교류를 중첩시켜 가할경우 변화하는 특성을 고찰하였다. 스펙트럼분석기상에서 반송파영점측정방법으로 견파수변조된 파의 특성을 측달하였다. 각파수변조는 아주 작은 교류신호전압으로 가능하며 변조주파수를 일정히하고 신호전압을 증가시키면 소요대역폭이 아주 커지고 신호전압을 일정히하고 변조각파수를 작게할때 대역건은 약간 좁아지는 결과를 얻었다. This paper dells with the impedance variations of the IMPATT diode depending upon the small a.c. coomponent superimposed on the d.c. bias. The frequency deviation of the modulated wave is measured using a carrier null method on microwave spectrum analyser. Frequency modulation is achieved by the weack a.c. signal superimposed on the d.c. bias. The bandwidth rapidly increase with increasing modulation signal magnitude for constant modulation frquency and slightly decrease with decreasing modulation frequency for constant modulation signal magnitude.