• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.303-308
• /
• 2008

Directly modulated fiber-optic links generally suffer higher link loss and larger signal distortion than externally modulated links. These result from the electron-photon conversion loss and laser modulation dynamics. As a method to overcome the drawbacks, we have experimentally demonstrated the RF performance of directly modulated, ultra-strong injection-locked gain-lever distributed Bragg reflector (DBR) lasers. The free-running DBR lasers exhibit an improved amplitude modulation efficiency of 12.4 dB under gain-lever modulation at the expense of linearity. By combining gain-lever modulation with ultra-strong optical injection locking, we can gain the benefits of both improved modulation efficiency from the gain-lever effect, plus improved linearity from injection locking. Using an injection ratio of R=11 dB, a 23.4-dB improvement in amplitude response and an 18-dB improvement in spurious-free dynamic range have been achieved.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.556-560
• /
• 2009

We have investigated the spectral characteristics of semiconductor lasers locked to the external light injected from a modulated laser. study on FM sideband injection locking has shown that when SLs are locked to the target sidebands of the directly modulated ML, the presence of the unselected sidebands influences the resulting microwave signals. The unselected signals can produce the unwanted beat signals around the desired beat signal, which degrade the overall system performance. This analysis way to generate Giga HZ signal generation.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.66-69
• /
• 2004

We have investigated the spectral characteristics of semiconductor lasers locked to the external light injected from a modulated laser. The numerical model for semiconductor lasers under the external optical injection is based on the Lang's equation and has been extended in order to take into account the simultaneous injection of the multiple sidebands of the current-modulated laser. In this paper, we have analyzed characteristics of semiconductor laser using optical injection locking

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.672-675
• /
• 2010

본 연구에서는 저주파영역의 가진분무에 대하여 추가적인 내부가진을 수행함으로써 변조분사되는 분무특성에 대한 연구를 수행하였다. 회전식 가진장치를 사용하여 1차 가진을 생성한 후 2차 가진원인 마그네틱 밸브를 사용하여 변조하였다. 변조분무의 FFT결과와 분무패턴의 가시화를 통하여 관찰한 결과, 2차 가진 제어가 있는 변조분사의 경우 1차 가진만 있는 분사보다 분무의 상하 운동 진폭이 작으며 분무 하단류의 침투깊이가 증가하는 경향성이 발견되었다.

• 한국분무공학회지
• /
• 제18권1호
• /
• pp.21-26
• /
• 2013

Diesel low temperature combustion (LTC) is the concept where fuel is burned at a low temperature oxidation regime so that $NO_x$ and particulate matters (PM) can simultaneously be reduced. There are two ways to realize low temperature combustion in compression ignition engines. One is to supply a large amount of EGR gas combined with advanced fuel injection timing. The other is to use a moderate level of EGR with fuel injection at near TDC which is generally called Modulated kinetics (MK) method. In this study, the effects of fuel injection pressure on performance and emissions of a single cylinder engine were evaluated using the latter approach. The engine test results show that MK operations were successfully achieved over a range of with 950 to 1050 bar in injection pressure with 16% $O_2$ concentration, and $NO_x$ and PM were significantly suppressed at the same time. In addition, with an increase in fuel injection pressure, the levels of smoke, THC and CO were decreased while $NO_x$ emissions were increased. Moreover, as fuel injection timing retarded to TDC, more THC and CO emissions were generated, but smoke and $NO_x$ were decreased.

• Journal of information and communication convergence engineering
• /
• 제8권4호
• /
• pp.457-460
• /
• 2010

we have analyzed tens of Giga pulse signal generation using sideband injection locking scheme. The numerical model for semiconductor lasers under the strong optical injection is based on the Lang's equation and has been extended in order to take into account the simultaneous injection of the multiple sidebands of the current-modulated laser. The numerical simulation results show that the unselected sidebands will affect the optical and RF-spectral characteristics even though the semiconductor laser is locked to the target sidebands.

• 한국자동차공학회논문집
• /
• 제4권3호
• /
• pp.102-111
• /
• 1996

For the air-fuel ratio control in a fuel injection SI engine, the Jump-Ramp control algorithm has been widely adopted by using the on/off type oxygen sensor. But the Jump-Ramp control method has limitation on treating the frequency and amplitude of the air-fuel ratio oscillation. This study suggests another feedback control logic named modulated fuel feedback control, which has a concept of pre-tuned air-fuel ratio oscillation. In the modulation method, the oxygen sensor output is not treated as on/off signal but as analog signal for feedback. By using the modulation method, the frequency and the amplitude of air-fuel ratio oscillation can be adjustable to some extent for improving the conversion efficiency of the Three-Way Catalyst. The result shows that the performance of the modulation method is better than that Jump-Ramp control method in reducing the amplitude of the air-fuel ratio oscillation as well as in increasing the frequency of the air-fuel ratio oscillation.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.309-312
• /
• 2008

We study signal characteristics of the injection-locked Fabry-Perot laser diodes(FP-LDs) for the development of a costeffective WDM-PON solution. The output power and system performance of WDM-PON using injection locked FP-LD are depend on optical characteristics of injection source. The effect of optical power and polarization state of the injection source experimentally investigated. We also measured BER characteristics of the directly modulated FPLD and its power penalty at the BER of $10^{-9}$.

• Current Optics and Photonics
• /
• 제4권5호
• /
• pp.405-410
• /
• 2020

A new all-optical flip-flop (AOFF) method based on the absorption nulls of an injection-locked Fabry-Perot laser diode (FP-LD) in transverse magnetic (TM) mode is proposed and experimentally demonstrated. For the set and reset operations of the AOFF, injection locking and the destructive minus of beating in transverse electric (TE) mode are used. The absorption nulls on the TM mode are modulated according to the operations, and then non-inverted (Q) and inverted (${\bar{Q}}$) outputs can be obtained simultaneously. Thanks to the use of several absorption nulls, the proposed AOFF can achieve multiple outputs with extinction ratios of more than 15 dB. Even though the experiment is demonstrated at 100 Mbit/s, the results of previous experiments using the injection of a CW holding beam imply that the operation speed can increase to 10 Gbit/s.

• 한국광학회지
• /
• 제17권2호
• /
• pp.143-148
• /
• 2006

광섬유 내 브릴루앙 산란의 이득 스펙트럼을 측정하는 새로운 방법을 제안하고 실험하였다. 기존의 측정 방식과는 달리, 주입전류를 직접 변조하여 광주파수 변조된 하나의 레이저 다이오드로부터 펌프광과 프로브광을 발생시키고, 주입전류를 사각파로 변조할 때 나타나는 광주파수 처핑을 이용하여 펌프/프로브간 광주파수 차이를 연속적으로 변화시키는 방법으로 브릴루앙 이득 스펙트럼을 측정하였다. 통신용 단일모드 광섬유의 브릴루앙 이득 스펙트럼을 측정하여 기존 문헌의 결과와 거의 일치하는 결과를 얻었다.