• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.901-908
• /
• 2020

This paper describes a method for scalable hardware implementation of modular inversion. The proposed scalable architecture has a one-dimensional array of processing elements (PEs) that perform arithmetic operations in 32-bit word, and its performance and hardware size can be adjusted depending on the number of PEs used. The hardware operation of the scalable processor for modular inversion was verified by implementing it on Spartan-6 FPGA device. As a result of logic synthesis with a 180-nm CMOS standard cells, the operating frequency was estimated to be in the range of 167 to 131 MHz and the gate counts were in the range of 60,000 to 91,000 gate equivalents when the number of PEs was in the range of 1 to 10. When calculating 256-bit modular inverse, the average performance was 18.7 to 118.2 Mbps, depending on the number of PEs in the range of 1 to 10. Since our scalable architecture for computing modular inversion in GF(p) has the trade-off relationship between performance and hardware complexity depending on the number of PEs used, it can be used to efficiently implement modular inversion processor optimized for performance and hardware complexity required by applications.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.190-194
• /
• 2002

Multiplication in Galois Field GF(2/sup m/) is a primary operation for many applications, particularly for public key cryptography such as Diffie-Hellman key exchange, ElGamal. The current paper presents a new architecture that can process Montgomery multiplication over GF(2/sup m/) in m clock cycles based on cellular automata. It is possible to implement the modular exponentiation, division, inversion /sup 1)/architecture, etc. efficiently based on the Montgomery multiplication proposed in this paper. Since cellular automata architecture is simple, regular, modular and cascadable, it can be utilized efficiently for the implementation of VLSI.

• Journal of the Korean Society of Costume
• /
• v.64 no.7
• /
• pp.156-171
• /
• 2014

This study attempted to comprehend the usage of the modular system in fields through literature review and objective research, as well as analysis of its expression characteristics in fashion. It tried to provide inspiring visual data for the fashion design of the modular system. After analyzing architecture and product-related books, Internet data and advanced research, the four expression characteristics of the modular system were obtained. Firstly, the formative expression characteristics of the modular system in fashion were simplicity, extensibility, variability and diversity. Secondly, of the formative expression characteristics expressed in modern fashion, simplicity (30%) was the highest, followed by extensibility (27%), diversity (22%) and variability (21%). Thirdly, simple silhouette and structure were used to express simplicity, usually simple geometric figures. In contrast, extensibility was expressed through the expansion and exaggeration of the area, length and volume of the clothes. In terms of variability, the typical characteristics of modules were reflected. For diversity, heterogeneous materials were used, and informality was expressed.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.25 no.4
• /
• pp.153-160
• /
• 2021

The connection of the steel structure serves to transmit external forces to the main components. The same is true for the behavior of modular systems composed mainly of steel or composite members. In this study, the joint performance of the composite and steel modules proposed was evaluated. The analytical models of the two joint types were constructed and were subjected to cyclic loading to assess the safety and the energy dissipation capacity of the joint types. The analysis results of the joints showed that the joints of the modular systems remain stable when the joint rotation reached the seismic performance limit state of the 0.02 rad required for steel intermediate moment frame. It was also observed that the joint of the composite modular system showed higher energy dissipation capacity compared with the steel modular system.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.336-343
• /
• 2022

Industrial robotic arms are widely adopted in numerous industries for manufacturing automation under factory settings, which eliminates the limitations of manual labor and provides significant productivity and quality benefits. The U.S. modular construction industry, despite having similar controlled factory environments, still heavily relies on manual labor. Thus, this study investigates the U.S., Canada, and Europe-based leading modular construction companies and research labs implementing industrial robotic arms for manufacturing automation. The investigation mainly considered the current research scope, industry state, and constraints, as well as identifying the types and specifications of the robotic arms in use. First, the study investigated well-recognized modular building associations, the Modular Building Institute (MBI), and renowned architecture design magazine, Dezeen to gather industry updates. The authors discovered one university lab and a few companies that adopted Switzerland-based robotic arms, ABB. Researching ABB robotics led to the discovery of ABB's competitor, Germany-based KUKA robotic arms. Consequently, research extended to the companies and labs adopting KUKA models. In total, this study has identified seven modular companies and four research labs. All companies employed robotic arms and gantry robot combinations in a production-line-like system for partial automation, and some adopted design standardization for optimization. The common goal among the labs was to achieve greater flexibility and full automation with robotic arms. This study will help companies better implement robotic arm automation by providing recommendations from investigating its current industry status.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.119-123
• /
• 2002

A new modular Lateral Information Propagation Networks(LIPN) has been designed. The LIPN has shown to be useful for reconstruction of information[3]. The problem is the fact that only the small number of nodes can be implemented in a IC chip with the circuit VLSI technology. The proposed modular architecture is propagated the neural network through inter module connections. For such inter module connections, the host (computer or logic) mediates the exchange of information among modules. Also border nodes in each module have capacitors for temporarily retaining the information from outer modules. The LIPN with $4{\times}4$ modules has been designed and simulation of interpolation with the designed LIPN has been done.

• Journal of the Korean Institute of Educational Facilities
• /
• v.16 no.2
• /
• pp.37-45
• /
• 2009

The purpose of this study is to suggest the plan formation for university dormitory's living unit by the modular unit of the pre-fabricated architecture, Pursuing this, this study conducts the investigation of present domestic situation of prefabricated construction and practices plan formation for living unit concentrating on the dweller's satisfaction by solving the problems which hitherto constructed dormitory had, especially collapse of dweller's territoriality. Consequently, this study presents the feasibility of modular unit of present prefabricated construction as a new method of dormitory's living unit construction, and suggests the pertinent plan formation for the improvement of the dweller's territoriality.

• Journal of the Korean Society of Costume
• /
• v.56 no.7 s.107
• /
• pp.85-100
• /
• 2006

Fashion related with architectural paradigms includes concept of the space utilization beyond fashions field. Such a fashions concept is able to enlarge as a spatial system like architecture. Interface between fashion and architecture is originated in thinking of the rhizome, which understands fashions field within various relationships between environment of the city and fashion. The existing construction systems of fashion is not sufficient in fashions roles as the space that wearing changing body continuously. Consequently, accommodation of architectural paradigms in fashion depends on new recognition about function and space. Architectural paradigms expressed in fashion since 1990s was classified as follows: 1 modular system of Le Corbusier & Archigram, 2 deconstruction, 3 reconstruction, 4 nomadic architecture. Such a paradigms has been easy to combination among fashion and architecture and furniture. Deconstruction and reconstruction fashion revealed process toward completion, and reappeared architectural consideration about process of change toward incompletion. There are acknowledged formative characteristics as follows: mobility, changeability, multi-function, mutual combinative, openness, and fluidity. This study shows that fashion is essential device determined city environment construction in 21C, and revels that fashion has been highlighted as a presage of new spatial economy received architectural construction systems.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.436-447
• /
• 2014

The major elements of avionics system architecture are requirements, Real Time Operating System, message communication, memory, and data format etc. Herein describes a state-of-the-art development trend for the avionics system architecture, system requirements and data bus among the major elements of avionics system. While, domestic technology has been tried to Integrated Modular Avionics(IMA) system based on the Avionics Full Duplex Switched Ethernet(AFDX) technology during Light Attack Helicopter(LAH) project in Korea, but not yet proved as the product case in Full Scale Development Phase. The avionics system architecture considering the domestic inexperience of the IMA system architecture are suggested for the Next-generation Corps Unmanned Aircraft System.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.4
• /
• pp.113-121
• /
• 2020

The Chinese Architect Wangshu, who won the Pritzker Architecture Prize at 2012, is the first and only winner in China. This study focused on the expression of his unique architectural ideas. Especially with a high interest in Chinese traditional calligraphy and landscape painting, Wangshu tried to use its traditional features to form his own architectural way. First this study looked at the features of calligraphy and landscape painting. Second this research studied the expression of Wangshu's architectural practice in calligraphy's way. Lastly this study furthered study of Wangshu's architecture combined with landscape paintings' features. The results state these following. 1) For calligraphy, he used the "modular composition" of Chinese characters to architectural composition, which included architectural form and materials. The "similarities" and "space creation" of calligraphy are respectively applied to architectural spatial details and site planning. 2) For landscape painting, Wangshu borrows its elements to compose his architecture with "gardening consciousness". The "view method" of paintings was used to his architectural pedestrian flows, and Wangshu also based on the "space creation" of landscape painting to do architectural space design with creating the similar atmosphere.