• Journal of Korean Dental Science
• /
• v.16 no.1
• /
• pp.74-79
• /
• 2023

Purpose: Cention N (Ivoclar Vivadent) was a recently introduced alkasite-based restorative material that was expected to replace amalgam and glass ionomer cement. This material was an esthetic restoration with adequate mechanical strength and release of fluoride and calcium. The purpose of this study was to measure the water sorption and water solubility of Cention N and evaluate its long-term durability compared to other esthetic restorations (Resin-Modified Glass Ionomer cement [RMGIC], Giomer, Composite Resin). Materials and Methods: Twenty specimens each of Cention N (CN), Resin Modified-Glass Ionomer Cement (FJ), Giomer (BF), and Composite Resin (FZ) were made. After each specimen was completely dried in a desiccator for 24 hours using a vacuum pressure pump, the specimen was weighed (m1). After that, the specimen was immersed in distilled water at 37℃ for 7 days, stored in a drying oven, and weighed (m2). After drying completely for 24 hours in a desiccator, the specimen was weighed (m3) to calculate the water absorption and water solubility using Formulas 1 and 2. The measured values were statistically processed and analyzed using SPSS, and the significance level was set at 0.05. Result: When measuring water sorption, FJ (122.61 ㎍/mm³) showed significantly higher water sorption than CN (35.42 ㎍/mm³) (P<0.05). There was no significant difference between FZ (18.03 ㎍/mm³) and BF (14.76 ㎍/mm³) (P=0.930). When measuring water solubility, CN (6.65 ㎍/mm³) showed significantly higher water solubility than FJ (1.47 ㎍/mm³) (P<0.05). Conclusion: Cention N had lower water sorption than RMGIC, but higher water solubility, indicating that it is more vulnerable to moisture and has lessened long-term durability.

• Korean Journal of Agricultural Science
• /
• v.50 no.4
• /
• pp.749-758
• /
• 2023

An understanding of safety problems pursuant to environmental release of GM (Genetically Modified) crops is considered important. Among the recognized safety problems, the possibilities of weediness and ecosystem invasion are constantly being validated. We herein compared the growth characteristics and germination rate of soybeans formed by hybridization with vitamin A-enhanced soybeans carrying an introduced gene that increases β-carotene content. We also examined overwintering, survival, and weed competitiveness to evaluate hybrid ecological impact on long-term unmanaged cultivatable land. These studies revealed that the hybrid soybeans exhibited intermediate growth characteristics and germination rate compared with the vitamin A-enhanced soybeans and wild soybeans, or exhibited traits similar to those of the maternal strain. Overwintering experiments were conducted by planting seeds at depths of 0, 5, 10, and 20 cm and recovering them after three or five months. After five months, all seeds at depths more than 5 cm lost viability. Among seeds recovered after three months, only wild soybeans retained viability at depths of more than 5 cm. Survival and weed competitiveness were assessed by sowing each type of seed and performing no irrigation, or pest or weed control. Quantitative assessment of numbers of individual soybean plants that appeared in the experimental plot revealed that all plants germinated after sowing, but only wild type plants survived overwintering. These studies suggest that both GM soybeans and hybrid soybeans cannot survive in uncultivated land even if they are released into the environment, which indicates less possibility of ecosystem invasion and weediness.

• Journal of Korea Water Resources Association
• /
• v.50 no.7
• /
• pp.475-488
• /
• 2017

To simulate accurate drought, a drought index is needed to reflect the hydrometeorological phenomenon. Several studies have been conducted in Korea using the Modified Surface Water Supply Index (MSWSI) to simulate hydrological drought. This study analyzed the limitations of MSWSI and quantified the uncertainties of MSWSI. The influence of hydrometeorological components selected as the MSWSI components was analyzed. Although the previous MSWSI dealt with only one observation for each input component such as streamflow, ground water level, precipitation, and dam inflow, this study included dam storage level and dam release as suitable characteristics of the sub-basins, and used the areal-average precipitation obtained from several observations. From the MSWSI simulations of 2001 and 2006 drought events, MSWSI of this study successfully simulated drought because MSWSI of this study followed the trend of observing the hydrometeorological data and then the accuracy of the drought simulation results was affected by the selection of the input component on the MSWSI. The influence of the selection of the probability distributions to input components on the MSWSI was analyzed, including various criteria: the Gumbel and Generalized Extreme Value (GEV) distributions for precipitation data; normal and Gumbel distributions for streamflow data; 2-parameter log-normal and Gumbel distributions for dam inflow, storage level, and release discharge data; and 3-parameter log-normal distribution for groundwater. Then, the maximum 36 MSWSIs were calculated for each sub-basin, and the ranges of MSWSI differed significantly according to the selection of probability distributions. Therefore, it was confirmed that the MSWSI results may differ depending on the probability distribution. The uncertainty occurred due to the selection of MSWSI input components and the probability distributions were quantified using the maximum entropy. The uncertainty thus increased as the number of input components increased and the uncertainty of MSWSI also increased with the application of probability distributions of input components during the flood season.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.228.2-228.2
• /
• 2010

In this work, the hydrogen production costs of the nuclear energy sources are estimated in the necessary input data on a Korean specific basis. G4-ECONS was appropriately modified to calculate the cost for hydrogen production of HTE process with Very High Temperature nuclear Reactor (VHTR) as a thermal energy source rather than the LUEC (Levelized Unit Electricity Cost). The general ground rules and assumptions follow G4-ECONS. Through a preliminary study of cost estimates, we wished to evaluate the economic potential for hydrogen produced from nuclear energy, and, in addition, to promptly estimate the hydrogen production costs for an updated input data for capital costs. The estimated costs presented in this paper show that hydrogen production by the VHTR could be competitive with current techniques of hydrogen production from fossil fuels if $CO_2$ capture and sequestration is required. Nuclear production of hydrogen would allow large-scale production of hydrogen at economic prices while avoiding the release of $CO_2$. Nuclear production of hydrogen could thus become the enabling technology for the hydrogen economy. The major factors that would affect the cost of hydrogen were also discussed.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.89-97
• /
• 1995

The investigate the effect of fiber orientation on the interlaminar fracture toughness of carbon fiber reinforced plastics three prepregs which are domestic products are used in this paper. Those are used for the unidirectional composites, but only one is used for the cross-ply laminate composites which is molded $[0/90]_{6s},\;[0/45]_{6s},\;and\;[0/45/90]_{4s}$. The specimens used for the mode I and mode II Tests are DCB and ENF samples are examined by scanning electron microscope(SEM). The value of $G_{IC}$ is almost same when modified three calculating methods are applied. The highest value of $G_{IC}$at crack initiation is obtained at the $[0/90]_{6s}$ interlaminar and the lowest one is at the $[0/45/90]_{4s}$ interlaminar. The highest value of $G_{IIC}$ at crack initiation, however, is obtained at the $[0/90]_{6s}$ interlaminar and the lowest one is at the $[0/45]_{6s}$. The photographs of SEM show a difference behaviour between mode I and mode II fracture surface.

• Journal of Korean Society on Water Environment
• /
• v.26 no.6
• /
• pp.1040-1048
• /
• 2010

An infiltration storage can be installed as a method of reducing runoff from catchment and increasing stream flow during the dry period by recharging groundwater. However, there is no proper model and method that can be used to design storage capacity of an infiltration storage in Korea. The purpose of the study is to evaluate capacities of infiltration storages planned on Jeju-do in Korea by modifying Storm Water Management Model (SWMM). The basic equations for the infiltration storage are same as those of the infiltration trench used in MIDUSS. Infiltration rates of the infiltration storages were first measured by double ring infiltrometers, and then the modified model was applied to evaluate adequacy for the capacities of three infiltration storages planned on Jeju-do in Korea. The application results show that the two infiltration storages with higher infiltration rates have adequate capacities to infiltrate the total water inflow to the storages. However, the other infiltration storage with lower infiltration rates has not sufficient capacity to infiltrate the total water inflow to the storage and release occurs to the downstream region. The simulation model and method applied can be used for capacity evaluation of future infiltration storages on highly pervious areas in Jeju-do.

• The KIPS Transactions:PartD
• /
• v.10D no.5
• /
• pp.837-844
• /
• 2003

The software reliability have to be improved as one major method to enhance the quality of developed software, and its defect is detected and modified through testing as a direct way to meet the purpose before releasing. Once its reliability grows up to the target and it is released to public. there nay be operational reliability problem. The operational software reliability trend nay be different depending on the condition whether it is universal or dedicated. And its reliability estimation is changed based on the condition if it follows uniform testing efforts or Weibull testing efforts. I study the operational reliability trend of dedicated software, applying two case testing efforts for the released item.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.723-726
• /
• 2009

As a preliminary study of cost estimates for nuclear hydrogen systems, the hydrogen production costs of the nuclear energy sources benchmarking GT-MHR are estimated in the necessary input data on a Korean specific basis. G4-ECONS developed by EMWG of GIF in 2008 was appropriately modified to calculate the cost for hydrogen production of SI process with VHTR as a thermal energy source rather than the LUEC. The estimated costs presented in this paper show that hydrogen production by the VHTR could be competitive with current techniques of hydrogen production from fossil fuels if $CO_2$ capture and sequestration is required. Nuclear production of hydrogen would allow large-scale production of hydrogen at economic prices while avoiding the release of $CO_2$. Nuclear production of hydrogen could thus become the enabling technology for the hydrogen economy. The major factors that would affect the cost of hydrogen were also discussed.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.5
• /
• pp.663-669
• /
• 2000

The fur (ferric uptake regulation) expression vector pMON2064 was modified to produce a Fur-fusion expression vector. A kinker site, factor Xa cleavage site, and several restriction endonuclease sites were introduced to facilitate easy cloning and isolating of the fusion protein. The resulting fusion expression vector, pMONSTER, was then used to make fusion expression vector, pMONSTER, was then used to make fusion proteins with $\beta$-galactosidase and the protease of the human immunodeficiency virus type 1 (HIV-1 PR). Strain SW4020 harboring the Fur $\beta$-galactosidase fusion vector produced blue colonies on a 5-bromo-4-chloro-3-indolyl-$\beta$-D-galactoside plate and the resulting 133 kDa fusion protein reacted with an anti-Fur antibody. The strain harboring the Fur-HIV-1 PR fusion vector produced a 29 kDa fusion protein, which also reacted with an anti-Fur antibody. The Fur-HIV-1 PR fusion protein was purified by a single column application that was designed to isolate the Fur protein. The purified Fur-HIV-1 PR fusion protein digested with factor Xa cleaved a recombinant Gag protein to release smaller fragments, including a p24 capsid protein. The Fur-HIV-1 PR fusion protein itself did not exhibit any proteolytic activity.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.3
• /
• pp.475-481
• /
• 2004

Recently it is strongly required on lower fuel consumption. lower exhaust emission, higher engine performance. and social demands in a spark ignition gasoline engine. In this study. the experimental engine used at test. it has been modified the lean burn gasoline engine. and used the programmable engine management system, and connected the controller circuit which is designed for the engine control. At the parametric study of the engine experiment, it has been controlled with fuel injection, ignition timing. swirl mode, equivalence ratio engine dynamometer load and speed as the important factors governing the engine performance adaptively. It has been found the combustion characteristics to overcome the hysteresis phenomena between normal and lean air-fuel mixing ranges. by mean of the look-up table set up the mapping values. at the optimum conditions during the engine operation. As the result, it is found that the strength of the swirl flow with the variation of engine speed and load is effective on combustion characteristics to reduce the bandwidth of the hysteresis regions. The results show that mass fraction burned and heat release rate pattern with crank angle are reduced much rather, and brake specific fuel consumption is also reduced simultaneously.