• Journal of the Korean Electrochemical Society
• /
• v.7 no.4
• /
• pp.167-172
• /
• 2004

3,4-dihydroxybenzaldehyde(3,4-DHB) was oxidatively el electropolymerized on glassy carbon (GC) electrodes to prepare CC/p-3,4-DHB type electrodes, which were subsequently modified with 3,4-dihydroxybenzoic acid(3,4-DHBA) using 0.05M HCI as a catalyst. The esterification reactions were performed between -OH sites on the polymeric film surface of the p-3,4-DHB and the -COOH sites within the 3,4-DHBA molecules in solution. These reactions had a rate constant value of $1.1\times10^{-1}\;s^{-1}$ for the esterification step as obtained from the first-order rate constant in the solution. The electrochemical responses of the GC/p-3,4-DHB-3,4-DHBA electrodes exert an influence upon the buffer solution, its pH and applied potential ranges. The redox process of the electrode was more easily controlled by charge transfer kinetics than that of the CC/p-3,4-DHB. The modified electrodes had redox active sites that were 10 times more active than those present before modification. The electrical admittance of the modified electrodes was also three times higher than that of the unmodified electrodes. After being annealed in ethanol for 20 hrs the electrodes brought about a 3.3 times greater change of water molecules in the redox reaction. The modified electrodes are stable in the potential range of 0.4 to 0.55V.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1032-1035
• /
• 2003

The field of handwriting recognition has been researched for many years. A hybrid classifier has been proven to be able to increase the recognition rate compared with a single classifier. In this paper, we combine support vector machine (SVM) and hidden Markov model (HMM) for offline handwritten numeral recognition. To improve the performance, we extract features adapted for each classifier and propose the modified SVM decision structure. The experimental results show that the proposed method can achieve improved recognition rate for handwritten numeral recognition.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.8
• /
• pp.683-690
• /
• 2004

A modified rectangular fin is analyzed by two-dimensional analytic method and finite difference method. Relative error of heat loss from the modified rectangular fin between analytic method and finite difference method is presented. Comparisons of fin effectiveness and heat loss between a modified rectangular fin and a plane rectangular fin are made as a function of the non-dimensional fin length and wing height for different positions of wings by using analytic method. The ratio of the incremental rate of heat loss to that of the area of a modified rectangular fin is shown as a function of the wing height. One of the results shows that performance of a modified fin is more improved as the wing approaches the fin root.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.27-33
• /
• 2011

In digital communication system that the Modified Constant Modulus Algorithm (MCMA) reduced the use of the adaptive equalization algorithm to combat the Inter-symbol Interference (ISI). MCMA is relatively brief operation. The major point of MCMA that it only achieves moderate convergence rate and steady state mean square error (MSE). In this paper suggest, MCMA equalization improve the performance with parallel structure. It combines Modified Constant Modulus Algorithm(MCMA) and Modified Decision Directed(MDD) algorithm. By exploiting the inherent structural relationship between the 4-QAM signal's coordinates and 16-QAM signal's coordinates, another style of cost function for Modified Constant Modulus Algorithm(MCMA) is defined and If it happen to offset of received signals and MCMA is poor performance in order to overcome this because the paper combines apply for MCMA and MDD(Modified Decision Direct) algorithm. By computer simulation, we confirmed that the proposed PMCMA-MDD algorithm has the fater convergence rate and steady mean square error than the conventional MCMA.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.342-356
• /
• 2016

Purpose: The drying of a thin layer of native cassava starch in a tray dryer was modeled to establish an equation for predicting the drying behavior under given conditions. Methods: Drying tests were performed using samples of native cassava starch over a temperature range of $40-60^{\circ}C$. We investigated the variation in the drying time, dynamic equilibrium moisture content, drying rate period, critical moisture content, and effective diffusivity of the starch with temperature. The starch diffusion coefficient and drying activation energy were determined. A modification of the model developed by Hii et al. was devised and tested alongside fourteen other models. Results: For starch with an initial moisture content of 82% (db), the drying time and dynamic equilibrium moisture content decreased as the temperature increased. The constant drying rate phase preceded the falling rate phase between $40-55^{\circ}C$. Drying at $60^{\circ}C$ occurred only in the falling rate phase. The critical moisture content was observed in the $40-55^{\circ}C$ range and increased with the temperature. The effective diffusivity of the starch increased as the drying temperature increased from 40 to $60^{\circ}C$. The modified Hii et al. model produced randomized residual plots, the highest $R^2$, and the lowest standard error of estimates. Conclusions: Drying time decreased linearly with an increase in the temperature, while the decrease in the moisture content was linear between $40-55^{\circ}C$. The constant drying rate phase occurred without any period of induction over a temperature range of $40-55^{\circ}C$ prior to the falling rate period, while drying at $60^{\circ}C$ took place only in the falling rate phase. The effective diffusivity had an Arrhenius relationship with the temperature. The modified Hii et al. model proved to be optimum for predicting the drying behavior of the starch in the tray dryer.

• Archives of Plastic Surgery
• /
• v.36 no.2
• /
• pp.183-187
• /
• 2009

Purpose: Because of the volume of elective sterilizations performed in the world during the past decade, the vasectomy was a popular method for male sterilization in Korea and this, in turn, had been followed by an increase in the number of patient requiring vasectomy reversal with the high rate of subsequent divorce and remarriage. Recently, many authors have reported high success rates of vasovasostomy using microsurgical techniques and we performed modified two layer vasovasostomy with intravasal silicone tube to increase postoperative patency and pregnacy rate. Methods: Microscopic vasovasostomy was performed in 9 patients and their average age was $35.78{\pm}1.36years$(from 28 years to 44 years) from June 2006 to June 2008 at our department using modified two layer vasovasostomy with silicone tube insertion. Standard Guibor silicone tube, consisting of two 17.7 cm, 0.064 cm diameter, malleable, stainless steel probes connected by 29 cm of silicone tubing wedged onto disposable probes, were used in all cases. Results: Success rates were 88.8 % for patency and pregnancy 44.4 % for pregnancy in modified two layer vasovasostomy with silicone tube insertion. The patency rates were higher in cases of long postoperative day and in cases of short duration of vasectomy and vasovasostomy. Conclusion: We used a modified method to correspond the patency and pregnancy rate in microscopical modified two layer vasovasostomy using the intravasal silicone tube permanently. This method brings normal patency in microsurgical vasovasostomy because the silicone tube prevent obstruction of anastomosed site of the vas permanently.

• Journal of Korean Medicine Rehabilitation
• /
• v.21 no.3
• /
• pp.33-43
• /
• 2011

Objectives : The purpose of this study was to investigate the influence of modified fasting therapy using fermented herbal medicine on the changes of body compositions. Methods : This study was carried out on 11 patients who carried out modified fasting therapy using fermented herbal medicine. They went through reducing food intakes period(7 days), fasting period(10~14 days) and refeeding period(10~14 days). Body compositions(weight, BMI(body mass index), skeletal muscle mass, body fat mass, percent body fat, basal metabolic rate, waist-hip ratio, visceral fat area) were measured at each state. And then the data was analyzed. Results : 1. The weight and BMI decreased during the reducing food intakes period and the fasting period, and increased during the refeeding period. But the weight and BMI decreased during the fasting therapy period, as a whole. 2. The skeletal muscle mass decreased during the fasting period and increased during the refeeding period. As the final outcome, for the whole fasting therapy period, decrease of skeletal muscle mass didn't show significance. The body fat mass and percent body fat decreased during the reducing food intakes period, the fasting period and the refeeding period. 3. The basal metabolic rate decreased during the fasting period and increased during the refeeding period. As the final outcome, for the whole fasting therapy period, decrease of basal metabolic rate didn't show significance. 4. The waist-hip ratio decreased during the fasting period and the refeeding period. The visceral fat area decreased during the fasting period and refeeding period. Conclusions : Results from this investigation showed that modified fasting therapy using fermented herbal medicine have positive effects on changes of body compositions. This results are expected to compensate the defects of existing fasting therapy.

• Journal of Korea Water Resources Association
• /
• v.55 no.spc1
• /
• pp.1271-1282
• /
• 2022

The optimal design of Water Distribution System (WDS) is used in various ways according to the purpose set by the user. The optimal design of WDS has various purposes, such as minimizing costs and minimizing energy generated when manufacturing pipes. In this study, based on the Modified Hybrid Vision Correction Algorithm (MHVCA), a cost-optimal design was conducted for various WDSs. We also propose a new evaluation index, Best Rate (BR). BR is an evaluation index developed based on the K-mean Clustering Algorithm. Through BR, a comparison was made on the possibility of searching for the optimal design of each algorithm used in the optimal design of WDS. The results of MHVCA for WDS were compared with Vision Correction Algorithm (VCA) and Hybrid Vision Correction Algorithm (HVCA). MHVCA showed a lower cost design than VCA and HVCA. In addition, MHVCA showed better probability of lower cost designs than VCA and HVCA. MHVCA will be able to show good results when applied to the optimal design of WDS for various purposes as well as the optimal design of WDS for cost minimization applied in this study.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.272-275
• /
• 2007

This paper is concerned with modified integration algorithm on the strain-space for rate and temperature dependent elasto-plastic constitutive relations in order to obtain more accurate results in numerical implementation. The proposed algorithm is integrated analytically using integration by part and chain rule and then is applied to the 2-stage Lobatto IIIA with second-order accuracy. It has advantage that is able to consider the convective stress rates on the yield surface of the strain-space. Also this paper is carried out the iteration procedure using the Newton-Raphson method to enforce consistency at the end of the step. And the performance of the proposed algorithm for rate and temperature dependent constitutive relation is illustrated by means of analysis of adiabatic shear bands.

• International Journal of Concrete Structures and Materials
• /
• v.19 no.1E
• /
• pp.25-32
• /
• 2007

The fracture energy evaluated from the previous experimental results can be simulated by using the modified singular fracture process zone (S-FPZ) model. The fracture model has two fracture properties of strain energy release rate for crack extension and crack close stress versus crack width relationship $f_{ccs}(w)$ for fracture process zone (FPZ) development. The $f_{ccs}(w)$ relationship is not sensitive to specimen geometry and crack velocity. The fracture energy rate in the FPZ increases linearly with crack extension until the FPZ is fully developed. The fracture criterion of the strain energy release rate depends on specimen geometry and crack velocity as a function of crack extension. The behaviors of micro-cracking, micro-crack localization and full development of the FPZ in concrete can be explained theoretically with the variation of strain energy release rate with crack extension.