• Acute and Critical Care
• /
• 제33권4호
• /
• pp.260-268
• /
• 2018

Background: The purpose of this study was to evaluate the clinical application of modified Burns Wean Assessment Program (m-BWAP) scoring at first spontaneous breathing trial (SBT) as a predictor of successful liberation from mechanical ventilation (MV) in patients with endotracheal intubation. Methods: Patients requiring MV for more than 72 hours and undergoing more than one SBT in a medical intensive care unit (ICU) were prospectively enrolled over a 3-year period. The m-BWAP score at first SBT was obtained by a critical care nursing practitioner. Results: A total of 103 subjects were included in this study. Their median age was 69 years (range, 22 to 87 years) and 72 subjects (69.9%) were male. The median duration from admission to first SBT was 5 days (range, 3 to 26 days), and the rate of final successful liberation from MV was 84.5% (n=87). In the total group of patients, the successful liberation from MV group at first SBT (n=65) had significantly higher m-BWAP scores than did the unsuccessful group (median, 60; range, 43 to 80 vs. median, 53; range, 33 to 70; P<0.001). Also, the area under the m-BWAP curve for predicting successful liberation of MV was 0.748 (95% confidence interval, 0.650 to 0.847), while the cutoff value based on Youden's index was 53 (sensitivity, 76%; specificity, 64%). Conclusions: The present data show that the m-BWAP score represents a good predictor of weaning success in patients with an endotracheal tube in place at first SBT.

• Journal of Pharmaceutical Investigation
• /
• 제26권2호
• /
• pp.105-112
• /
• 1996

The surface of albumin microspheres was modified with methotrexate(MTX) by using 1,3-dicyclohexylcarbodiimide (DCC). Surface-modified albumin microspheres entrapping no MTX (SAMS), free MTX (SAMSF) and MTX-bovine serum albumin(BSA) conjugates(SAMSC) were prepared. The organ-targeting ability of free $[^3H]MTX,\;[^3H]MTX-BSA$ conjugate and the above microspheres was evaluated after i.v. administration of the preparations, equivalent to 150 nCi via the tail vein of mice. The total radioactivity in the lung increased immediately in a few minutes after i.v. injection of the microspheres, and then declined for the period of 3-4 weeks. However, the radioactivity in the liver, spleen and kidney increased slowly during the rapid decrease in radioactivity in the lung. This suggested that the microspheres could be entrapped rapidly in the lung through mechanical filtration because of their large size and slowly redistributed to the liver, spleen and kidney due to either the microspheres being degraded enough for the size to allow passage through the capillary beds of the lung and/or the release of $[^3H]MTX\;or\;[^3H]MTX-BSA$ conjugates from the microspheres. The amount of $60{sim}70%$ of the dose was targeted to the liver after the i.v. injection of SAMS, SAMSF and SAMSC, and the values of $(R_e\;^*\;_{e)liver}$ from the microspheres were $5{\sim}7$ compared to free MTX. This suggested that the liver-targeting ability from surface-modified albumin microspheres could be $5{\sim}7$ times as that of free MTX. The liver-targeted drug was accumulated in the Kupffer cells at the initial stage, thereafter the drug in the Kupffer cell was slowly transferred into the hepatocytes. The value of AUQ for liver from SAMS was higher than that from SAMSF, but much lower than that from SAMSC. This suggest that MTX bound to their surface could be eliminated slower than the entrapped free MTX, and faster than the entrapped MTX-BSA conjugates. This is consistent with the in vitro release rates order in the presence of a proteolytic enzyme. Also, surface-modified MTX was scarcely released in the absence of a proteolytic enzyme. Therefore, the surface-modified MTX nay be released (or eliminated) rapidly from SAMSC at the target site, and thereafter MTX may be released (or eliminated) slowly from the entrapped MTX-BSA conjugates in SAMSC for a long period.

• 아시안잔디학회지
• /
• 제3권2호
• /
• pp.77-82
• /
• 1989

This experiment was carried out to determine the value of turfgrass clippings as a source of protein for animal feed. Levels of crude protein(CP) and in vitro dry matter digestibility(JVDMD) were determined for Korean lawngrass (Zoysia Japonica Steud.) under three levels of nitrogen fertilizer ( 0 , 350 and 700kg ha year and three levels of mowing interval between cuts (lO, 20, and 30 days). Sampling was done on the three-year old turffield on which nitrogen and mowing treatments were Imposed. Clippings were collected after mowing, and CP levels were calculated from a measurement of total N(CP = N >< 6.25) l)y Auto-analyser system-2 procedure and IVDMD by Maeng's method which was partly modified with Tilley and Terry's procedure. With the increased nitrogen legime the CP content of leaf clippings varied from 6.6 to 13.6% and that Of stem clippings from 4 to 10.3%. The CP levels of clippings were directly proportional to the N fertilization rate. The highest CP content was recorded in early July when it was 14.1% at 35OkgN ha -and I 18.l%kgN ha-1 with 10-wcek mowing interval. Mowing interval had little effect on the CP content in both leaf and stem clippings. The level of IVDMD in the Korean lawngrass clippings varied with mowing interval. The highest level measured was 47%, hut this varied during the growing season and occurred in the following order : early summer > summer > fall. This experiment has shown that Korean lawngrass clippings can he helpful source of protein for use in some animal feeds and that a high concentration of CP can occur depending upon N fertllizer and that of I VDM I) upon mowing practices.

• 한국농공학회지
• /
• 제31권4호
• /
• pp.96-110
• /
• 1989

To suggest the fundamental data for the estimation of crop evaportranspiration by the ca- lculated coefficients for estimating the radiation suitable to the different regions of korea in application of Penman equcation, the daily data such as sc(skycover), n(actual sunshine hours), N(possible sunshine hours), Rs(horizontal solar radiation) and Ra(extraterrestial solar radiation) for 10 years (from 1977 to 1986) collected from 19 meteorological stations were analysed. The results are summarized as follows : 1. The coefficients a, b and c for estimating the radiation taken by the regression method with the daily and monthly mean data of the skycover and the ratio of Rs to Ra were shown as a=0.619, b= -0.0202, c= -0.0023 and a=0.64, b=0.0377 c=0.0001 in ave- rage respectively. 2. The coefficients a and b for estimating the radiation analysed by the regression and arithmetic method from the daily ratio of sunshine hours and Rs to Ra were shown as a= 0.157, b= 0.529, and a=0.119, b= 0.726 in average, respectively. 3. The coefficients a and b for estimating the radiation calculated by the regression me- thod based on the monthly ratio of sunshine hours and radiation were shown as a=0. 319 and b= 0.557 in average. 4. The values of a and b for estimating the radiation taken from the relationship between the daily ratio of sunshine hours and radiation showed high significance level. 5. The standard deviation and the coefficient of variance between the radiation calculated from the coefficients by the regression and arithmetic method with the daily data and the actual radiation were analysed and compared to the results by the coefficients of the modified Penman method (a=0.18, b=0.55) and by those of the F.A.O inodified Penman method(a=0.25, b=0.5). The standard deviation and the coefficient of varia- nce by the regression method in this study showed the lowest value. 6. From the above results, it is suggested that regression method using the coefficients taken from the relationship between the ratio of sunshine hours and the ratio of radia- tion based on the daily data has the highest accuracy in estimating the radiation. 7. The average reference crop evapotranspiration estimating by the modified Penman me- thod using the coefficients a and b derived by the regression method from the daily meterological data was closer to the actual evapotsranspiration of grass measured in Suwon area than the estimated evapotranspiration by the modified Penman method and the F.A.O modified Penman method.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권4호
• /
• pp.329-335
• /
• 1995

Seven varieties of rice were cultivated in the field of BLRI of which three were native (Maloti, Nizershail and Chandrashail) and four were improved ($BR_3$, $BR_{11}$, Pasam and Mala). Yields of straw and grain were recorded and the chemical composition of straw was determined. Both the grain (p < 0.05) and straw (p > 0.05) yields were higher in the improved than the native varities. Relationships of straw dry matter yield with the hights of rice plants, tiller numbers, levels of N fertilizer and lengths of stover were found to be statistically insignificant. No significant differences were observed among the varieties in respect of NDF, cell soluble, cellulose and hemicellulose contents. However, modified acid detergent fibre and insoluble ash content were significantly (p < 0.05) higher in the local varieties. Except $BR_3$, the estimated ME content of straw was higher in the improved than the native varieties. In respect of yield, chemical composition and energy content improved straws were better and Pasam was the best.

• 접착 및 계면
• /
• 제3권1호
• /
• pp.13-19
• /
• 2002

We have studied on the surface and adhesion properties for acrylic terpolymers, having both hydrophobic and hydrophilic side chains, synthesized via solution polymerization. In order to develop a waterborne material. we tried to synthesize these terpolymers via emulsion polymerization. The polymeric emulsion synthesized was mainly composed of methyl methacrylate (MMA), methoxy-polyethyleneglycol methacrylate (MPEGMA) having hydrophilic side chains and methoxypolypropyleneglycol methacrylate (MPEGMA) having hydrophobic side chains. The viscosities of this series increased with an increase in the content of the co-monomer such as MPEGMA and (MPEGMA). This behavior resulted in the increase in the diameter and heterogeneity of the emulsion particle via AFM observation. Furthermore. the tensile adhesion strength and 90-degree peel strength of the adhesive of these polymeric emulsions were measured. In the case of polymeric emulsion composed of the same content of both hydrophilic and hydrophobic component, the adhesion property showed the highest value. However, since the adhesion properties as a practical applicable adhesive were poor, some improvements were required. When the composition above was modified with butyl acrylate (BA), the improvement effect on adhesion strength was accepted. In particular, 90-degree peel strength increased up to a maximum of 400% of the original value.

• 한국축산식품학회지
• /
• 제33권1호
• /
• pp.58-66
• /
• 2013

In this study, the effect of packaging methods [aerobic packaging (AP), vacuum packaging (VP) and modified atmosphere packaging (MAP: 75% $N_2$, 25% $CO_2$)] on colour, lipid quality and microbial growth of beef patties enhanced with flaxseed flour was investigated during storage at $2{\pm}1^{\circ}C$ for 10 d. L and a values of beef patties packaged in MAP and VP were higher (p<0.05) than that of the samples packaged in AP. Packaging in MAP and VP retarded the lipid oxidation (TBA value) and inhibited the bacterial growth of beef patties enhanced with flaxseed flour. Furthermore, TBA values in beef patties were correlated with a values (r = -0.340; p<0.05). Packaging in MAP was more effective than packaging in VP for inhibiting microbial growth. The samples packaged in VP lost their shape due to the compression by external atmosphere. Packaging treatment had no significant effect on saturated fatty acid (SFA), monounsaturated fatty acid (MUFA) and polyunsaturated fatty acid (PUFA) levels in beef patties. The a and b, TBA and MUFA values changed during storage time. TBA values for beef patties increased during storage time, but did not reach to the limit value (1 mg/kg) until the end of the storage time. The results suggest that the shelf life of beef patties enhanced with flaxseed flour can be extended by packaging in MAP.

• 한국재료학회지
• /
• 제25권6호
• /
• pp.288-292
• /
• 2015

New lead-free piezoelectric ceramics $0.96[\{Bi_{0.5}(Na_{0.84}K_{0.16})_{0.5}\}_{1-x}La_x(Ti_{1-y}Nb_y)O_3]-0.04SrTiO_3$ (BNKT-ST-LN, where $x=y=0.00{\leq}(x=y){\leq}0.015)$ were synthesized using the conventional solid-state reaction method. Their crystal structure, microstructure, and electrical properties were investigated as a function of the La and Nb (LN) content. The X-ray diffraction patterns revealed the formation of a single-phase perovskite structure for all the LN-modified BNKT-ST ceramics in this study. The temperature dependence of the dielectric curves showed that the maximum dielectric constant temperature ($T_m$) shifted towards lower temperatures and the curves became more diffuse with an increasing LN content. At the optimum composition (LN 0.005), a maximum value of remnant polarization ($33C/cm^2$) with a relatively low coercive field (22 kV/cm) and high piezoelectric constant (215 pC/N) was observed. These results indicate that the LN co-modified BNKT-ST ceramic system is a promising candidate for lead-free piezoelectric materials.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 Proceedings of 6th International Joint Symposium on Microeletronics and Packaging
• /
• pp.35-43
• /
• 2001

Flip chip assembly on organic substrates using ACAs have received much attentions due to many advantages such as easier processing, good electrical performance, lower cost, and low temperature processing compatible with organic substrates. ACAs are generally composed of epoxy polymer resin and small amount of conductive fillers (less than 10 wt.%). As a result, ACAs have almost the same CTE values as an epoxy material itself which are higher than conventional underfill materials which contains lots of fillers. Therefore, it is necessary to lower the CTE value of ACAs to obtain more reliable flip chip assembly on organic substrates using ACAs. To modify the ACA composite materials with some amount of conductive fillers, non-conductive fillers were incorporated into ACAs. In this paper, we investigated the effect of fillers on the thermo-mechanical properties of modified ACA composite materials and the reliability of flip chip assembly on organic substrates using modified ACA composite materials. Contact resistance changes were measured during reliability tests such as thermal cycling, high humidity and temperature, and high temperature at dry condition. It was observed that reliability results were significantly affected by CTEs of ACA materials especially at the thermal cycling test. Results showed that flip chip assembly using modified ACA composites with lower CTEs and higher modulus by loading non-conducting fillers exhibited better contact resistance behavior than conventional ACAs without non-conducting fillers. Microwave model and high-frequency measurement of the ACF flip-chip interconnection was investigated using a microwave network analysis. ACF flip chip interconnection has only below 0.1nH, and very stable up to 13 GHz. Over the 13 GHz, there was significant loss because of epoxy capacitance of ACF. However, the addition of $SiO_2filler$ to the ACF lowered the dielectric constant of the ACF materials resulting in an increase of resonance frequency up to 15 GHz. Our results indicate that the electrical performance of ACF combined with electroless Wi/Au bump interconnection is comparable to that of solder joint.

• Advances in nano research
• /
• 제8권3호
• /
• pp.229-244
• /
• 2020

In this paper, modified Kelvin's model has been used to analyze the orthotropic vibration frequencies of single walled carbon nanotubes with clamped-clamped and clamped-free boundary conditions. For this system the governing equation is developed with wave propagation approach. Armchair, zigzag and chiral structures are considered for the vibrational analysis to investigate the effect of different modes, in-plane rigidity and mass density per unit lateral area. Throughout the computations, on decreasing the length-to-diameter ratios, the frequencies of said structure increases. In addition, by increasing three different value of in-plane rigidity resulting frequencies also increase and frequencies decrease on increasing mass density per unit lateral area. The results generated using computer software MATLAB to furnish the evidence regarding applicability of present model and also verified by available published literature.