• Bulletin of the Korean Chemical Society
• /
• 제23권6호
• /
• pp.803-807
• /
• 2002

The conversion of dimethyl ether(DME) has been carried out over $\gamma-alumina$, silica-alumina, and modified $\gamma-aluminal$ catalysts. Especially, the water effect has been investigated on purpose to develop a suitable catalyst for one-step synthesis of DME from $CO_2$ hydrgenation, The $\gamma-Al_2O_3$ modified with 1 wt% silica is more active and less deactivated by water than unmodified one. $CO_2has$ no effect on catalytic dehydration of methanol to DME.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.519-523
• /
• 2013

When atomic layer deposition (ALD) is performed on a porous material by using an organometallic precursor, minimum exposure time of the precursor for complete coverage becomes much longer since the ALD is limited by Knudsen diffusion in the pores. In the previous report by Min et al. (Ref. 23), shrinking core model (SCM) was proposed to predict the minimum exposure time of diethylzinc for ZnO ALD on a porous cylindrical alumina monolith. According to the SCM, the minimum exposure time of the precursor is influenced by volumetric density of adsorption sites, effective diffusion coefficient, precursor concentration in gas phase and size of the porous monolith. Here we modify the SCM in order to consider undesirable adsorption of byproduct molecules. $TiO_2$ ALD was performed on the cylindrical alumina monolith by using titanium tetrachloride ($TiCl_4$) and water. We observed that the byproduct (i.e., HCl) of $TiO_2$ ALD can chemically adsorb on adsorption sites, unlike the behavior of the byproduct (i.e., ethane) of ZnO ALD. Consequently, the minimum exposure time of $TiCl_4$ (~16 min) was significantly much shorter than that (~71 min) of DEZ. The predicted minimum exposure time by the modified SCM well agrees with the observed time. In addition, the modified SCM gives an effective diffusion coefficient of $TiCl_4$ of ${\sim}1.78{\times}10^{-2}\;cm^2/s$ in the porous alumina monolith.

• 공업화학
• /
• 제8권6호
• /
• pp.1048-1053
• /
• 1997

수소형 모더나이트를 불화수소산처리하여 실리카/알루미나의 비가 다른 변형된 모더나이트를 만들고 이를 $\gamma$-알루미나와 혼합한 촉매를 제조하여 미소반응기에서 triphenylmethane (TPM)의 분해반응을 실시하였다. 미세공 구조인 수소형 모더나이트를 불화수소산처리로 탈알루미늄하면 산량은 감소하지만 2차 세공인 중세공이 형성되어 TPM의 분해활성과 2차 분해생성물인 벤젠의 선택성이 향상되었다. 그러나 더욱 불화수소산처리된 모더나이트는 산량 감소와 일부 세공구조의 파괴에 의한 미세공막힘 현상에 의해 분해활성이 저하되었다. 따라서 전처리된 모더나이트상에서 TPM의 분해활성과 벤젠의 선택성은 모더나이트의 실리카/알루미나 비가 17 정도에서 가장 우수하였다. 이들 전처리된 모더나이트를 알루미나와 혼합한 촉매는 순수한 모더나이트 촉매보다 TPM의 분해활성이 더욱 우수하였다. 이는 알루미나의 큰 중세공에서 TPM이 1차 분해반응하고 다음에 모더나이트의 중세공과 미세공에서 분해되는 단계적인 분해반응이 일어나기 때문이다.

• 멤브레인
• /
• 제10권4호
• /
• pp.186-191
• /
• 2000

Ethyl esters (aroma model compounds; ethyl acetate, ethyl propionate, ethyl butyrate) 수용액으로부터 aroma 화합물의 회수를 위해, 표면 개질한 알루미나막을 이용하여 증기 투과를 수행하였다. Ethyl butyrate의 구동력이 가장 큼에도 불구하고, 투과부에서 ethyl ester의 농도는 ethyl butyrate가 가장 높았으며, ethyl propionate, acetate의 순서로 나타났다. 또한, 물에 대한 ester 화합물의 용해도가 상당히 낮기 때문에 투과부에서 상분리가 일어나 순수한 aroma 화합물을 얻을 수 있었다. 실험 결과, 제조된 소수성 알루미나막은 에스테르 화합물에 대해 높은 선택도와 투과 플럭스를 보여 주었다.

• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1103-1105
• /
• 2002

H-ZSM-5 and γ-alumina were treated with formaldehyde and sodium carbonate. The treatment increased the amounts of weak acid sites, removing strong acid sites. The maximum temperature of weak acid sites in their ammonia TPD spectra shifted in the direction of high temperature. The modified H-ZSM-5 and g-alumina were mixed with the methanol synthesis catalyst to perform dimethyl ether synthesis from syn-gas. The modified catalysts showed better selectivity to dimethyl ether, minimizing the reforming reaction to carbon dioxide. The maximum yield of 53.3% to dimethyl ether was achieved under the reaction conditions of 54.4 atm, 523 K, and the feed rate of 4500 Lhr-1 .gcat-1.

• 분석과학
• /
• 제13권4호
• /
• pp.544-547
• /
• 2000

By using surface modified activated alumina with AI(III) and flame atomic absorption spectrometry, a rapid and convenient method for the selective analysis of chromium (III) and chromium (VI) in water has been developed. This technique appears to work accurately under optimum pH range from 3 to 5.

• Bulletin of the Korean Chemical Society
• /
• 제13권2호
• /
• pp.117-118
• /
• 1992

Boron trifluoride etherate on alumina catalyses the condensation 5-(1,1-dimethylheptyl)-resorcinol, monoalkyl-5-(1,1-dimethylheptyl)-resorcinol and 5-(1,1-dimethylheptyl)-resorcinol dimethyl ether with 1-methyl-2-cyclohexen-l-ol. The products obtained was good to excellent yields.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.49-52
• /
• 2004

New hydrophobic alumina nanoparticles were synthesized from alumina powders which were hydrophilic nano-agglomerates with diameters from ${\mu}m$ to mm by surface modification. The synthesized hydrophobic alumina nanoparticles which were retreated with Oleic acid were analyzed by Fourier transform infrared spectrophotometer and transmission electron microscopy. Then transformer oil containing surface-modified alumina naonparticles were synthesized. The synthesized hydrophobic alumina nanoparticles were well-dispersed in transformer oil. The coefficient of viscosity and dielectric strength of the Nano-transformer oil were investigated with viscometer and high voltage experiment device. In this study, the thermal conductivity of Nano-transformer oil was investigated to reduce the oil temperature of transformer by transient hot-wire method.

• 대한치과보철학회지
• /
• 제42권2호
• /
• pp.125-132
• /
• 2004

Statements of problem: All ceramic fixed partial denture cores can be made by the slip casting method and the advanced alumina tape method. The fracture resistance of these core connector areas is relatively low. Purpose: The purpose of this study is to standardize the appropriate volumetric figure and location of the connectors in the alumina core fabricated in alumina tape to be used in fixed partial dentures by way of topology optimization. Material and method: A maxillary anterior three-unit bridge alumina core with teeth form and surrounding periodontal apparatus model was used to ultimately design the most structurally rigid form of the connector. Loadings from a $0^{\circ}$, $45^{\circ}$ and $60^{\circ}$ to the axis of each tooth were applied and analyzed with the 3-D finite element analysis method. Using the results from these experiments, the topology optimization was applied and the optimal reinforcement layout of connector was obtained and the detail shape in the fixed partial denture core was designed. Results: The modified prosthesis with the form of a bulk in the lower lingual surface of the connector in the event, reduced the stress concentration up to 20% in the 3-D FEA. Conclusion: The formation of a bulk in the lower lingual connector area of an alumina core for a fixed partial denture decreases the stress to a clinically favorable measure but does not harm the esthetic point of view. This result illustrates the possibility of clinical application of the modified form designed by the topology optimization method.

• 멤브레인
• /
• 제11권3호
• /
• pp.124-132
• /
• 2001

고온에서 수소 분리 회수를 목적으로 silica/alumina 복합 막을 합성하였다. 막의 선택 투과 성능을 향상시키기 위해, sol-gel법에 의한 silica 및 alumina층을 중간층으로 도입하고, 그 위에 강제유동 CVD법에 의한 silica를 합성하였다. Sol-gel법에 의해 ${\alpha}$-alumina tube에 합성한 ${\gamma}$-alumina 및 silica 막은 Knudsen 확산 영역의 많은 mesopore를 포함하고 있어서 수소 선택 분리 막으로는 적합하지 못했다. 하지만, sol-gel법에 의해 합성한 silica/${\gamma}$-alumina층에 강제유동 CVD법으로 silica를 합성한 결과, 질소 투과 영역의 세공이 완전히 제거되어, 높은 수소 선택성을 가지는 복합 막이 형성되었다. 그 막은 온도에 따라 수소 투과 속도가 증가하여 $450^{\circ}C$에서 $5.57{\times}10^{-8}molm^2s^LPa^1$의 수소 투과 속도와, 9.52 kJ/mol의 활성화 에너지를 나타냈다. 분자체 효과에 의해 질소 투과가 완전히 배제되고, 수소만 선택적으로 투과되는 silica/alumina 복합막이 성공적으로 합성된다.