• 아동학회지
• /
• 제8권2호
• /
• pp.61-71
• /
• 1987

The effects of token and social reinforcement on inappropriate study behaviors of nursery school children were investigated. The subjects were three nursery school boys, and the target behaviors were : 1) out-of-seat behaviors, 2) bothering other children, and 3) disruptive behaviors. The ABAB(Reversal) design was used in this experiment. It consisted of four periods : baseline, reinforcement I, reversal, and reinforcement II. During the reinforcement period, social reinforcement as well as token reinforcement was applied. In all three subjects, inappropriate study behaviors decreased during the reinforcement periods (I, II), and increased during the reversal period, showing the effects of token and social reinforcement. The subjects showed stability in three post-experimental tests, indicating that modification of inappropriate study behaviors was being maintained.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.179-182
• /
• 1997

In a training simulator for power plant, operator's action in the MCR(Main Control Room) are given to plant process and computer system model as an inputs, and the same response as in real power plant is provided in real time. Inter-process communication and synchronization are especially important among various inputs. In the plant simulator, to simulate the digital control system such as FOXBORO SPEC-200 Micro control system, modification and adaptation of control card(CCC) and its continuous display station(CDS) is necessary. This paper describes the modeling and simulation of FOXBORO SPEC-200 Micro control system applied to Younggwang nuclear power plant unit #3 & 4, and its integration process to the full-scope replica type training simulator. In a simulator, display station like CDS of FOXBORO SPEC-200 Micro control system is classified as ITI(Intelligent Type Instrument), which has a micro processor inside to process information and the corresponding alphanumeric display, and the stimulation of ITI limits the important functions in a training simulator such as backtrack, replay, freeze and IC reset. Therefore, to achieve the better performance of the simulator, modification of CDS and special firmware is developed to simulate the FOXBORO SPEC-200 Micro control system. Each control function inside control card is modeled and simulated in generic approach to accept the plant data and control parameter conveniently, and debugging algorithms are applied for massive coding developed in short period.

• 콘크리트학회논문집
• /
• 제15권5호
• /
• pp.739-746
• /
• 2003

Various researches on the application of polymer dispersions to the cement mortar and concrete have been carried out in many countries like America, Japan and Germany and so on due to their high performance and good modification effect. PAE of polymer dispersion widely used in situ was employed that the high flowability may be induced in the cement mortar. In order to investigate the modification of cement mortar with high flowability by PAE and fracture mode of adhesive strength properties in tension of that, experimental parameters were set as PAE solid-cement ratio(P/C) and cement: fine aggregate(C:F) and the experiments such as unit weight, flow, consistency change, crack resistance and segregation that inform on the general properties have been done. Adhesion in tension is measured with a view to comprehending the properties and fracture mode in tensile load. Consistency change of cement mortar modified by PAE did grow better as the ratio of PAE solid-cement increased and was much superior to that of resin based flooring such as polyurethane and epoxy which recorded the loss of consistency in 90 min. after mixing. Adhesive strength in tension increased with continuity during curing period and showed the maximum in case of C:F=1:1 and P/C=20%.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.433-438
• /
• 1998

Design lateral strength calculated by current seismic design code is prescribed to be much lower than the force level required for a structure to respond elastically during design level earthquake ground motion. Present procedures for calculating seismic design forces are based on the use of elastic spectra reduced by a strength reduction factor known as "response modification factor, R". This factor accounts for the inherent ductility, overstrength, redundancy, and damping of a structural system. This study considers ductility and overstrength of the wall-type structure for investigating R factor. This means that R factor is determined from the product of "ductility-based R factor($R_$\mu$$) and overstrength factor($R_s$). $R_$\mu$$ factor is calibrated to attain the targer ductility ratio (system ductility capacity) and produced in the from of $R_$\mu$$ spectra considering the influence of target ductility, natural period, and hysteretic model. On the other hand, $R_s$ is more difficult to quantify, since it depends on both material and system-dependent uncertain parameters. In this study Rs factor was determined from the result of push-over analysis.-over analysis.

• 한국수소및신에너지학회논문집
• /
• 제17권4호
• /
• pp.418-424
• /
• 2006

In order to improve the activation properties of the $AB_2$ type hydrogen storage alloys for Ni-MH battery, the alloy surface was modified by employing high energy ball milling. The $Zr_{0.54}Ti_{0.45}V_{0.54}Ni_{0.87}Cr_{0.15}Co_{0.21}Mn_{0.24}$ alloy powder was ball milled for various period by using the high energy ball mill. As the ball milling time increased, activation of the $AB_2$ type composite powder electrodes were enhanced regardless of additives. When the ball milling time was small discharge capacities of the $AB_2$ type composite powder electrodes increased with the milling time. On the other hand for large milling time it decreased with increasing milling time. The maximum discharge capacity was obtained by ball milling for 3-4 min.

• Corrosion Science and Technology
• /
• 제15권2호
• /
• pp.78-83
• /
• 2016

The e-coating to inhibit induced corrosion can deposit a coating not only on the exterior surface but also on the inside of whole metallic components of body-in-white (BIW). But it is difficult to deposit paint films on the inside area because metallic components are multi layered. It may cause shortness of e-coating thickness. The only way to properly verify e-coating thickness is by performing the use of tear-down prototypes. When paint films' thickness is inadequate, a structural modification on each metallic component is needed. Verification of the thickness improvement for a structural modification requires much manual effort and leads to increasing development time. Recently, the simulation technology has been developed to predict the e-coating thickness in e-coating field. By applying the simulation to BIW, improvement in paint thickness quality and shortening of development period are expected. The paper explains a validated solution that allows simulating the effect of design changes to the e-coating thickness and current density, thereby delivering results within a time frame of a few days.

• 한국지진공학회논문집
• /
• 제7권2호
• /
• pp.39-48
• /
• 2003

반응수정계수의 핵심구성요소인 연성계수에 대하여 통계적 분석을 수행하였다. 연성계수의 체계적인 산정을 위하여 총 1,860개의 지진기록을 수집하였다. 수집된 지진기록을 지반 전단파의 평균속도에 따라 4가지로 분류하고, 탄소성 이력거동을 가지는 단자유도 구조물에 대하여 비탄성 스펙트럼을 작성하였다. 작성된 비탄성 스펙트럼으로부터 연성계수를 구하고, 변위연성비, 토질조건, 규모 및 진앙거리가 연성계수에 미지는 영향을 분석하였다. 토질 조건별로 평균연성계수를 구하고, 산정된 연성계수의 산포도를 검토하기 위하여 변동계수를 산정하였다.

• 콘크리트학회논문집
• /
• 제15권3호
• /
• pp.497-503
• /
• 2003

Supplementary cementitious materials (SCM) such as fly ash, ground granulated blast furnace slag and silica fume are now being extensively used in concrete to control expansion due to alkali-silica reactivity (ASR). However, the replacement level of a single SCM needed to deleterious ASR expansion and cracking may create other problem and concerns. For example, incorporating silica fume at levels greater than 10％ by mass of cement may lead to dispersion and workability concerns, while fly ash can lead to poor strength development at early age, The combination of silica fume and fly ash in ternary cementitious system may alleviate this and other concerns, and result in a number of synergistic effects. The aim of the study was to enable evaluation of more realistic suitability of a silica fume-fly ash combination system for ASR resistance based on an in-house modification of ASTM C 1260 test method. The modification can be more closely identified with actual field conditions. In this study three different strengths of NaOH test solution(1N, 0.5N, and 0.25N) were used to measure the expansion characteristics of mortar bar made with a reactive aggregate. The other variable included longer testing period of 28 days instead of a conventional 14 days.

• 한국환경복원기술학회지
• /
• 제14권4호
• /
• pp.67-80
• /
• 2011

This study is focused upon developing repairing and restoration methodologies of the Paleolithic sites. The Paleolithic era is not only the remote past, which ended ten thounds years ago, but the period of much different ecological condition compared with that of these days. There have been two kinds of conservation method adopted to restoration of Paleolithic sites which are historic park and ecological park. But there left not much historic remains than ecological sources in most Paleolithic sites, restoring them into ecological park is thought to be more reasonable for the purpose of conserving sites and remains. The first step of restoring Paleolithic sites is reconstructing environmental background in which they earned a living with their own life style at that time. There are three ways of ecological restoration for prehistoric sites, which are the reclamation, the rehabilitation, and the restoration. The reclamation requires physical modification, and the rehabilitation does biological modification, but only the restoration requires improved management. Among them, the most desirable way applicable upon the Paleolithic sites restitution is the reclamation.

• Archives of Plastic Surgery
• /
• 제46권2호
• /
• pp.114-121
• /
• 2019

Background Bilateral cleft lip deformity is much more difficult to correct than unilateral cleft lip deformity. The complexity of the deformity and the sensitive relationships between the arrangement of the muscles and the characteristics of the external lip necessitate a comprehensive preoperative plan for management. The purpose of this study was to evaluate the repair of bilateral cleft lip using the Byrd modification of the traditional Millard and Manchester methods. A key component of this repair technique is focused on reconstruction of the central tubercle. Methods Fourteen patients with mean age of 5.7 months presented with bilateral cleft lip deformity and were operated on using a modification of the Millard and Manchester techniques. Patients with a very wide cleft lip and protruded or rotated premaxilla were excluded from this study. We analyzed 30 normal children for a comparison with our patients in terms of anthropometric measurements. Results By the end of the follow-up period (between 9 and 19 months), all our patients had obtained a full central segment with adequate white roll in the central segment and a deep gingivolabial sulcus, and we obtained nearly normal anthropometric measurements in comparison with age-matched normal children. Conclusions We recommend this modified technique for the treatment of bilateral cleft lip deformity.