• 한국간호교육학회지
• /
• 제13권1호
• /
• pp.82-89
• /
• 2007

Purpose: The purpose of this study was to develop and evaluate an e-Learning Program designed to enhance novice nurses's performance ability Method: The e-Learning program was designed for novice nurses before beginning to work in a hospital using a KMS(Knowledge Management System). This study was carried out from February 2006 to April 2007. The program had progressive steps including design, pilot test & modification, contents development, program application and evaluation. After the program design and pilot testing, the learner's satisfaction was analyzed. Result: The program site is http://kms.emc.ac.kr titled, 'Cyber Education Center'. The sixteen part course has been developed as follows: blood sugar test, skin test, insulin test 1, insulin test 2, blood culture, blood sampling, heat therapy, cold therapy, glycerin enema, preparation of operation, oxygen therapy, suction technique, transfusion, foley catheterization and aseptic technique. The overall learner's satisfaction score was 4.08 out of 5 points. Conclusion: E-Learning could be useful for education and nursing work. This method may be effective for clinical nurses.

• 멤브레인
• /
• 제25권4호
• /
• pp.332-342
• /
• 2015

본 연구는 역삼투막의 막오염을 해결하기 위하여 실란-에폭시 층을 형성시킨 다층 표면개질법을 이용하여 역삼투막의 내오염성을 향상시키고자 하였다. Sol-gel법을 이용하여 Octyltrimethoxysilane (OcTES)을 막 표면에 가교를 통해 고분자화 하였으며 n = 8인 OcTES의 알킬기가 자발적인 self-assembly를 통하여 막 표면에 가지구조를 형성시켰다. 그 위에 ethylene glycol diglycidyl ether (EGDE)의 ether기를 ring-opening을 통해 막 표면에 친수성을 부여하여 역삼투막의 내오염성을 향상시키고자 하였다. FE-TEM, AFM을 이용하여 막의 단면 및 표면구조 분석을 하였고 막 표면의 ridge and valley 구조와 OcTES, EGDE의 다층 표면개질로 인한 bridge 구조를 확인하였으며, 거칠기의 증가를 통해 막 표면의 가지가 잘 형성되었음을 확인하였다. XPS를 통하여 막 표면의 화학구조에 대한 관찰과 표면개질이 잘 이루어졌음을 확인하였으며, contact angle 분석을 통해 표면개질막의 표면에 친수성이 부여되었음을 확인하였다. EGDE 표면개질 조건 최적화를 진행한 결과 EGDE 농도는 0.5 wt%, ring-opening 온도는 $70^{\circ}C$가 가장 적합하였고, 내오염성 실험 결과 및 막오염지수(MFI)는 SUL-H10, $PA-OcTES_{1.0}$, $PA-OcTES_{1.0}-EGDE_{0.5}$이 68.7, 60.4, 5.4 ($10E-8hr/mL^2$)로 나타나 다층 표면 개질막의 내오염성이 매우 향상되었음을 확인할 수 있었다.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2005년도 춘계학술대회
• /
• pp.559-570
• /
• 2005

본 논문은 오픈소스를 활용하여 e-Learning 에 필수적인 LMS를 개발 제시 하였다. 이는 MTT 에서 시작된 dotLRN 오픈소스 프로젝트를 한글화 하고, 인터넷 교육 표준안인 SCORM을 수용할 수 있는 모듈을 추가 개발하여 학습자의 학습 상황을 관리할 수 있는 기능을 부여한 것이다. 본 시스템은 공주 대학교 가상 대학의 LMS로서 1년 동안 안정적으로 서비스를 제공하였으며, 이를 기반으로 개발 시스템의 기능과 특정을 알아보고, 특히 학습소요시간을 활용한 학습결과 분석에 대하여 고찰 하고자한다.

• Earthquakes and Structures
• /
• 제16권2호
• /
• pp.185-196
• /
• 2019

One of the shortcomings of seismic bridge design codes is the lack of clarity in defining the role of different seismic isolation systems with linear or nonlinear behavior in terms of R-factor. For example, based on AASHTO guide specifications for seismic isolation design, R-factor for all substructure elements of isolated bridges should be half of those expressed in the AASHTO standard specifications for highway bridges (i.e., R=3 for single columns and R=5 for multiple column bent) but not less than 1.50. However, no distinction is made between two commonly used types of seismic isolation devices, i.e., elastomeric rubber bearing (ERB) with linear behavior, and lead rubber bearing (LRB) with nonlinear behavior. In this paper, five existing bridges located in Iran with two types of deck-pier connection including ERB and LRB isolators, and two bridge models with monolithic deck-pier connection are developed and their R-factor values are assessed based on the Uang's method. The average R-factors for the bridges with ERB isolators are calculated as 3.89 and 4.91 in the longitudinal and transverse directions, respectively, which are not in consonance with the AASHTO guide specifications for seismic isolation design (i.e., R=3/2=1.5 for the longitudinal direction and R=5/2=2.5 for the transverse direction). This is a clear indicator that the code-prescribed R-factors are conservative for typical bridges with ERB isolators. Also for the bridges with LRB isolators, the average computed R-factors equal 1.652 and 2.232 in the longitudinal and transverse directions, respectively, which are in a good agreement with the code-specified R-factor values. Moreover, in the bridges with monolithic deck-pier connection, the average R-factor in the longitudinal direction is obtained as 2.92 which is close to the specified R-factor in the bridge design codes (i.e., 3), and in the transverse direction is obtained as 2.41 which is about half of the corresponding R-factor value in the specifications (i.e., 5).

• 한국콘텐츠학회논문지
• /
• 제10권3호
• /
• pp.113-121
• /
• 2010

e-Book은 종이책에서 볼 수 없는 하이퍼링크, 멀티미디어 기능, 쌍방향성 등 여러 장점들을 가지고 있기 때문에, 사용자들이 손쉽게 터치 방식으로 시스템에 접근할 수 있다. XML은 하이퍼링크와 스타일 기능과 지식 전달과 표현에 적합한 구조를 가지고 있기 때문에, XML은 e-Book의 문서표준안으로 제정되었다. 본 논문에서는 서울 1000년 타임캡슐 문화 콘텐츠를 관광객들에게 홍보 및 안내할 수 있는 e-Book 형태로 개발하였다. 또한, e-Book 솔루션을 사용하여 발생된 XML코드의 수정과정을 거쳐 사용자 중심의 e-Book 기반 타임캡슐 안내시스템을 구축하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.115-115
• /
• 2015

Many efforts have been devoted on chemical modification of graphene layer to modulate its electrical properties. In the previous report, laser irradiation on the CYTOP (Amorphous Fluoropolymer) covered graphene layer induces chemical modification wherein carbon fluoride is formed on the graphene surface. This results in the insulating I-V characteristics, which have been attracting much research interests on it. However, the direct analytical evidence of the fluoride formation on graphene surface is not yet studied. In this work we investigated what happened on the CYTOP/graphene interface during photon irradiation using spatially resolved photoemission spectroscopy method. It is found that the soft x-ray (614 eV) induces desorption of fluoride atoms from the CYTOP and change di-fluoride form to mono-fluoride. As the photo-induced fluorine desorption is continue strong dipole field generated by initial di-fluoride forms is gradually decreased, resulting in the overall binding energy shift of the C 1s core levels. Both photo-modified CYTOP and CYTOP starts to desorb above $286^{\circ}C$ (~ 0.047 eV), which means that no strong chemical interaction between CYTOP and graphene is established.

• 대한전자공학회논문지
• /
• 제24권5호
• /
• pp.794-803
• /
• 1987

In this paper, the SPICE 2.G6 JFET subroutine and other related subroutines are modified for circuit simulation of GaAs MESFET IC's. The hyperbolic tangent model is used for the drain current-voltage characteristics of GaAs MESFET's and derived channel-conductance and drain-conductance model from the above current model are implemented into small-signal model of GaAs MESFET's. And, device capacitance model which consider after-pinch-off state are modified, and device charge model for SPICE 2G.6 are proposed. The result of modification is shown to be suitable for GaAs circuit simulator, showing good agreement with experimetal results. Forthermore the DC convergence of this paper is better than that of SPICE 2.G JFET subroutine. GaAs MESFET model in this paper is applied for both depletion mode GaAs MESFET and enhancement-mode GaAs MESFET without difficulty.

• 한국세라믹학회지
• /
• 제31권2호
• /
• pp.137-146
• /
• 1994

This experiments were focused on a modification of mechamical properties and structure in porous aluminum titanate ceramics by new additives which have been not researched yet. These were consisted of four kinds of additives i.e. Bi2O3, FeO, ZnO and NiO by addition amount of 1 wt% and 5 wt% respectively. The addition of Bi2O3 retarded a degree of syntehsis of aluminum titanate and accelerated in FeO, ZnO, NiO additives. Also, the most effective accelerator in synthesis of alunium titanate was FeO. A additives for the most effective of modification of microstructure, sharp distribtion of pore size and mechanical proterties was on ZnO addition and showed the lowest average pore size and narrowed pore size distribution. In order to improve of microstructure and pore size distribution in porous aluminum titanate ceramics was desired the addition amount of 1 wt% compare to 5 wt%.

• 소음진동
• /
• 제4권4호
• /
• pp.479-486
• /
• 1994

The Finite Element Method(FEM) generally used for the structural analysis has some defects, i.e. a great deal of computational time and huge memory capacity of computer are needed in the application to large and/or complex structures, etc. Therefore the Component Mode Synthesis method(CMS), one of sub-structure synthesis methods, was made to improve such demerits and has been developed up to now. In optimum structural modification problems, the sensitivity analysis method is useful, where the sensitivity-calculated by Fox's suggestion-is defined as the diffentials of design variables for the objective values. This paper discusses the vibration minimization techniques for the oper box type structure, in which it is assumed that an engine operates at 10-40Hz range. The results obtained are as follow; (1) The sensitivity of natural frequency could be easily obtained by sensitivity analysis method and the optimum position to insert pillars could be found by using it. (2) The rates of structural modification could be exactly obtained and the natural frequency observed could be easily shifted to the objective value. (3) The maximum amplitude around natural frequency noted could be nearly reduced to 1/25 by modification.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.17-20
• /
• 2000

In order to improve the sheet formability of the ferritic stainless steel, the through-thickness textures of the recrystallized sample was modified by means of a thermomechanical treatment. An annealing process between the cold rolling reductions modified the preferred orientations throughout the thickness, which resulted in the modification of the final cold rolling texture as well as the final recrystallization texture. With the help of the modification of the recrystallization texture by the intermediate annealing, improvement of the sheet formability, i.e. an increase of the Lankford value.