• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.254-264
• /
• 2019

This paper proposes an indirect current control technique based on a proportional resonant (PR) approach for the seamless mode transfer of utility interactive inverters. Direct-current and voltage hybrid control methods have been used for inverter control under grid-connected and islanded modes. A large bandwidth can be selected due to the structure of single-loop control. However, this results in poor dynamic transients due to sudden changes of the controller during mode changes. Therefore, inverter control based on indirect current is proposed to improve the dynamic transients by consistently controlling the output voltage under all of the operation modes. A PR-based indirect current control topology is used in this study to maintain the load voltage quality under all of the modes. The design processes of the PR-based triple loop are analyzed in detail while considering the system stability and dynamic transients. The mode transfer techniques are described in detail for both sudden unintentional islanding and islanded mode voltage quality improvements. In addition, they are described using the proposed indirect control structure. The proposed method is verified by the PSiM simulations and laboratory-scale VDER-HILS experiments.

• Environmental Engineering Research
• /
• 제22권4호
• /
• pp.363-368
• /
• 2017

The external diseconomy is hampering sustainable development of the city logistics sector. Burdens on urban environment imposed by the city logistics industry have been put in the spotlight. Based on the principle of Life Cycle Analysis, the comprehensive environment impact for city logistics systems is measured. Firstly, with the city logistics service chain as a whole, its business processes and their interactions with environment are analyzed. In total four types of major environment impact categories are determined. Secondly, case study is made on three city logistics operators located in Jing-Jin-Ji region of China with different business modes, respectively self-operation mode, joint distribution mode and the $3^{rd}$ Party Logistics or 3PL mode. Through analysis of energy consumption and emissions for various business processes, their comprehensive environmental impact values are finally obtained. Thirdly, horizontally comparative analysis is carried out to these three modes of the urban logistics distribution systems. Results show the advantages of the 3PL and the joint distribution modes in developing greener urban logistics distribution. Future research avenues and policy suggestions are proposed finally.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.39-40
• /
• 2006

Diesel power plant(DPP) with the medium speed diesel engine is operated under the very severe condition in aspect of load and operating time as compared with the marine diesel generator set. So, minimized vibration level have to be insured for the more stable operation of engine and generator. The vibration of generator set mainly comes from the resonance between the rigid modes by resilient mount or distortion modes by structural stiffness and the excitation forces of engine. Then, avoidance of resonance with structural modification is generally well known. In this paper, the first order vibration in non-resonance range and local vibration modes were investigated by impact test, response/ODS(operational deflection shape) measurement and 3D finite element analysis for the additional reduction of vibration. The proposed countermeasures were actually applied and their final effects were verified through the in-situ measurement.

• 대한수학교육학회지:학교수학
• /
• 제11권1호
• /
• pp.71-91
• /
• 2009

본 논문은 기본적인 계산능력이 뛰어난 초등학교 6학년 학생 2명을 대상으로 분수 나눗셈 문제를 해결하는 과정에서 나타나는 연산 감각을 분석하였다. 구체적으로 학생들이 분수 나눗셈의 다양한 의미와 모델을 어떻게 이해하고 있는지, 분수 나눗셈 알고리듬의 의미를 어떻게 이해하고 있는지, 그리고 이러한 연산의 의미와 성질을 어떻게 응용하는지에 대해 임상 면담을 통해 면밀하게 탐색하였다. 구체적인 에피소드를 바탕으로 연산감각의 구성요소별로 두 학생의 질적 차이를 분석하고, 이를 기초로 하여 초등학교 고학년에서 연산 감각 자체를 보다 집중적으로 조명해 볼 필요가 있다는 점을 강조하였다.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.991-996
• /
• 2010

본 논문에서는 IEEE 1284 동작 모드를 사용하는 병렬 I/O 제어 시스템을 제안하고 인터넷 환경하에서 원격제어 통신을 실현하였다. IEEE 1284 표준은 다수의 특정한 동작 모드와 호환성이 있는 인터페이스를 정의하며 PC의 병렬 포트에 대해 보다 개선된 성능을 제공한다. 병렬 포트 장치는 Device/ID 식별 절차를 갖는 병렬 포트에 대해 PnP 기능을 제공하게 되는 새로운 운영체제 때문에 시스템 구성과 인터페이스 절차가 간단하게 된다. 이러한 성능 증대로 병렬 I/O 포트는 더욱 저가격, 실용이 간편한 I/O 포트로 가능하게 된다.

• 국제지역연구
• /
• 제22권1호
• /
• pp.61-78
• /
• 2018

해외직접투자에서 자회사 운영방식은 크게 수평적 자회사와 수직적 자회사로 구분할 수 있다. 이와 같은 자회사의 운영방식은 진출국의 제도에 따라 차이를 보인다. 본 연구는 제도이론관점에서 국내 전기전자 및 자동차산업의 해외직접투자 기업을 대상으로 진출국 공식적, 비공식적 제도가 해외 자회사 운영 방식선택에 미치는 영향을 실증 분석하였다. 실증분석결과, 진출국 정치적 위험정도가 낮을수록, 문화적 차이가 클수록 수직적 자회사를 선택하는 것으로 나타났다. 반면에 진출국 부패지수가 낮을수록, 경제자유도가 높을수록 수평적 자회사를 선택하는 것으로 나타났다.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.869-875
• /
• 2012

Because of the nature of wind, the output power of wind turbines fluctuates according to wind speed variation. Therefore, many countries have set up wind-turbine interconnection standards usually named as Grid-Code to regulate the output power of wind farms to improve power system reliability and power quality. This paper proposes three operation modes of wind farms such as maximum power point tracking (MPPT) mode, single wind turbine control mode and wind farm control mode to control the output power of wind turbines as well as overall wind farms. This paper also proposes an operation scheme of wind farm to alleviate power fluctuation of wind farm by choosing the appropriate control mode and coordinating multiple wind turbines in consideration of grid conditions. The performance of the proposed scheme is verified via simulation studies in PSCAD/EMTDC with doubly-fed induction generator (DFIG) based wind turbine models.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권2호
• /
• pp.45-51
• /
• 2009

Three-dimensional numerical analyses of mechanical ventilation system in vent shaft of subway in operation are carried out in relation with the different air flow passage of vent shaft and two ventilation operation modes of push/pull, The ventilation characteristics of vent shaft with regard to the shape change are evaluated. And the air flow rate through the vent shaft by ventilation system is measured within subway in operation to assess the accuracy and applicability of the numerical analysis method. The decrease of air flow rate due to vent-shaft change are between 0.7 to 2.2% in the cases examined.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.245-250
• /
• 2004

The discharge current oscillation has been measured for various hollow anode widths and its axial positions using a 1㎾-class anode layer hall thruster. As a result, there were thresholds of magnetic flux density for stable discharge. The plasma structure inside the hollow anode was numerically analyzed using the fully kinetic 2D3V Particle-in-Cell (PIC) and Direct Simulation Monte Carlo (DSMC) methods. The results reproduced both stable and unstable operation modes. In the stable operation case, which corresponds to the case with low magnetic flux, the plasma penetrated into the hollow anode deeper than the case with higher magnetic flux density case. This suggests that comparably large substantial anode area should contribute to stable operation.

• 전력전자학회논문지
• /
• 제1권1호
• /
• pp.38-46
• /
• 1996

The commutation operation of the current source converter for switched reluctance motor drives is analyzed in this paper. The commutation operation in the current source converter consists of two modes. At turn-off of phase switch, the phase current decreases sinusoidally, and the sum of two phase currents during commutation period is constant. At this time, the capacitor voltage increases quickly with changing polarity and decreases slowly when another phase switches turn on or off. Frequency of step-down DC chopper in the current source converter is low because of the dump such as BJTs and GTOs are possible as phase switches instead of Power MOSFET and IGBTS. They may result in reductions of conduction losses and manufacturing cost in the current source converter comparing to the voltage source converter of SRM.