• 설비공학논문집
• /
• 제16권6호
• /
• pp.556-565
• /
• 2004

We have experimented an actual solar water heating system acquiring real data for one year period. On the basis of the operation data, it is necessary to predict the system performance such as collector efficiency and solar fraction, and to analyze the economical efficiency for system optimal design. To estimate the performance of actual systems through simulation, valid modelling for components consisting of the system should be accompanied. The present study is focused on the modelling for load patterns and operating control conditions. We proposed two load models: concentration model which gathers real loads as a meaningful group and distribution model which disperses real loads with time. If grouping of the load distribution is suitable, the predicted values by the concentration model approaches to those by the distribution model close to actual load pattern apparently. As a result, both of them are in good agreement with those by experiment.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.67-72
• /
• 2006

There are many modelling methods using theoretical and experimental data. Recently, fractal interpolation methods have been widely used to estimate and analyze various data. Due to the chaotic nature of dynamic roundness profile data in roundness some desirable method must be used for the analysis which is natural to time series data. Fractal analysis used in this paper is within the scope of the fractal interpolation and fractal dimension. Also, two methods for computing the fractal dimension has been introduced which can obtain the dimension of typical dynamic roundness profile data according to the number of data points in which the fixed data are generally lower than 200 data points. This fractal analysis result shows a possible prediction of roundness profile that has some different roundness profile in round shape operation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.129-132
• /
• 1997

Laser scanning is widely used due to its fast measuring and high precision, and the segmentation of the scanned data is necessary for the fast and efficient surface modelling. But most segmentation techniques are based on the very regular data and the adaptation of previous techniques to the scanned data does not usually produce good result. A new approach to perform the segmentation on the scanned data is introduced to deal with problems during reverse engineering process. The approach is based on the triangulated data and its result is depending on the some user-defined criteria. The result is illustrated to demonstrate its adaptability to the measured data on free-form surface and the each result by different criteria is compared respectively.

• 한국지능시스템학회논문지
• /
• 제7권3호
• /
• pp.65-71
• /
• 1997

신경 회로망의 출현으로 비선형 시스템 모델링에 대한 관힘이 다시 고조되고 있다. 따라서 본 논문에서는 미지의 비선형 시스템을 동적으로 인식하기 위해 GMDH(Group Method of Data Handling) 일고리즘을 사용한 DPNN(Dynamic Polynomial Neural Network)을 제안한다. GMDH를 사용한 동적 시스템의 인신은 일렬의 입/출력 데이타를 인가하여 필요한 계수들의 집합을 동적으로 산출함으로써 훈련시킨다. 또한 DPNN을 이용하여 비선형 시스템을 제어하기 위해, MRA(Model Reference Adaptive Control)를 설계한다. 결과에서 컴퓨터 시뮬레이션을 통해 DPNN을 사용한 모델링과 제어가 잘 수행됨을 알 수 있었다.

• Advances in aircraft and spacecraft science
• /
• 제5권2호
• /
• pp.205-223
• /
• 2018

During launch a spacecraft is subjected to a variety of dynamical loads transmitted through the launcher to spacecraft interface or air-born transmission excitations in the acoustic pressure field inside the fairing. As a result, spacecraft are tested on ground to ensure and demonstrate the global integrity of the structure against these loads, to screen the flight hardware for quality of workmanship and to validate mathematical models. This paper addresses the numerical modelling and simulation of the low frequency sine and random vibration tests performed on electrodynamic shaker facilities to comprise the mechanical-borne transmission loads through the launcher to spacecraft interface. Consequently, the paper reviews techniques and methodologies to derive a reliable and representative coupled virtual vibration testing simulation environment based on experimental data. These technologies are explored with the main objectives to ensure a stable, reliable and accurate control while testing. As a result, the use of the derived simulation models in combination with the added value of improved control and signal processing algorithms can lead to a safer and smoother vibration test control of the entire environmental test campaign.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.364-370
• /
• 1995

The One-dimensional fin model is used to analyze the angular wall temperature variation of long horizontal lines, where stratification could result in top-to-bottom differences in wall temperatures. The top and bottom sections are treated separately and coupled by boundary conditions. The thermal stratification analysis is focused on the effects of the heat transfer rates at the pipe surface. The results show that the heat transfer rate at the pipe surface is the controlling parameter which reduce significantly the temperature difference in pipe circumferential direction. The one-dimensional fin modelling analysis results are verified by comparison with the operating PWR test data. The circumferential temperatures of pipe calculated by one-dimensional fin modelling agree well with the PWR plant test data.

• 한국정보통신학회논문지
• /
• 제14권7호
• /
• pp.1544-1550
• /
• 2010

비선형 동적 시스템을 모델링하기 위해 GMDH(Group Method of Data Handling)를 적용한 많은 연구들이 수행되어 왔다. 그러나 모델링의 정확성을 위해서는 계산량이 크게 증가한다. 그러므로 본 논문에서는 입력 데이터를 취사선택하는 기준을 점감적으로 조정함으로써 적어도 정확성을 유지하면서 전형적인 GMDH의 단점인 과도한 계산을 피할 수 있는 방법을 제안한다. 컴퓨터 시뮬레이션 결과, GMDH 알고리듬의 계산량을 성공적으로 줄일 수 있었고 에러율도 소폭 줄일 수 있었다.

• 한국군사과학기술학회지
• /
• 제13권2호
• /
• pp.235-242
• /
• 2010

DSTC(Defense Systems Test Center) in ADD(Agency for Defense Development) performs a test for various kinds of weapon system. In order to provide accurate test measurement data relating to the weapon system's performance with customer, A reliable test process and an objective analysis of the measurement data are required. DSTC is trying to apply CMMI(Capability Maturity Model Integration) Ver 1.2 in a test process. In this paper, we present the result of CMMI Engineering Process Area Modelling of Test Process.

• 대한지리학회지
• /
• 제39권4호
• /
• pp.633-642
• /
• 2004

본 연구의 목적은 규칙기반 모델링을 구성하여 하계망을 일반화하고자 하였다. 그 동안 지도 일반화에 대한 연구는 제한된 지도요소를 대상으로 선형사상의 형태변형을 위한 알고리즘 개발과 평가에 집중되었다. 규칙 기반 모델링은 지도제작 원리와 공간현상의 분포패턴을 분석하여, 그 결과를 일반화 과정에 적용하기 때문에 기존의 일반화 알고리즘 개선에 도움이 된다. 규칙기반 모델링은 다양한 지도요소들을 대상으로 일반화를 적용할 수 있고, 디지털 환경하에서 다축척 지도제작에 효과적이다. 본 연구에서 개발된 하계망 규칙기반 모델링은 일반화 규칙, 중심선 추출 그리고 선형사상 일반화 알고리즘으로 구성된다. 일반화를 적용하기 앞서, 하계망은 논리적 오류를 최소화하기 위해 저수지와의 연결관계를 분석하였다. 모델을 적용한 결과, 108개의 실폭 하천 중 17개 하천이 중심선으로 추출되었다. 하천의 총길이는 1:25,000에서 17%, 1:50,000에서는 29%로 감소하였다. 선형사상 일반화를 위해 개발된 Simoo 알고리즘은 Douglas-Peucker 알고리즘과 비교하였다. Doug]as-Peucker 알고리즘은 자료점 간격과 편각이 커지게 되어 선의 형태가 거칠어지는 반면, Simoo 알고리즘에서 선형사상은 축척이 감소함에 따라 보다 완만해진다.

• Structural Engineering and Mechanics
• /
• 제6권4호
• /
• pp.467-471
• /
• 1998

A mathematical model is developed to predict the fatigue notch factor of butt welds subject to number of parameters such as weld geometry, residual stresses under dynamic combined loading conditions (tensile and bending). Linear elastic fracture mechanics, finite element analysis, dimensional analysis and superposition approaches are used for the modelling. The predicted results are in good agreement with the available experimental data. As a result, scatters of the fatigue data can be significantly reduced by plotting S-N curve as ($S{\cdot}K_f$) vs. N.