• 제목/요약/키워드: Modeling Methods

검색결과 3,820건 처리시간 0.036초

생활 습관, 주거지 주변 녹지 비율 및 지하수 내 라돈 농도 따른 실내 라돈 농도 영향 모델 (Affected Model of Indoor Radon Concentrations Based on Lifestyle, Greenery Ratio, and Radon Levels in Groundwater)

  • Lee, Hyun Young;Park, Ji Hyun;Lee, Cheol-Min;Kang, Dae Ryong
    • Journal of health informatics and statistics
    • /
    • 제42권4호
    • /
    • pp.309-316
    • /
    • 2017
  • 라돈 및 그 자손은 폐암을 일으키는 환경적 위험인자로, 일상 활동 및 수면 등으로 많은 시간을 보내는 실내 라돈 농도 관리는 필수적이다. 이를 위해서는, 주거지를 둘러싼 개인적, 사회적, 환경적 요소에 대한 총체적 접근이 필요하다. 따라서 본 연구는 실내 라돈 농도에 영향을 미치는 다양한 인자를 찾아내고, 이를 활용한 포괄적 모델을 구축하고자 한다. 건축 자재 및 생활 양식을 포함한 주거 환경에 대한 자료를 얻기 위해 설문을 실시하였고, 의사결정트리 및 구조 방정식 모델링을 활용하였다. 그 결과 주거지 주변 녹지 비율, 불 투과성 층 비율, 주택과 지면의 맞닿은 상태, 매일 환기 습관, 난방 습관, 측정 장치 주위의 균열 및 침실여부는 실내 라돈 농도와 유의한 연관성을 보였다. 매일 환기 습관을 가질 경우 실내 라돈 농도가 $200Bq/m^3$ 이상인 비율이 11.6%로 줄었다. 한편 매일 환기습관이 없는 주거자의 주거지 주변 녹지 비율이 65% 이상이면 매일 환기 습관이 있는 주거자와 비교하여 15.3%의 비율이 증가하였다. 구축된 포괄적 모델의 실내 라돈 농도에 직접 영향을 미치는 인자는 주거지 주변 녹지 비율과 환기율이었다. 제시된 모델로 국내 라돈 농도에 대한 개인의 지리적 특성, 지하수 및 생활 양식 요소의 결합된 영향을 확인할 수 있었다.

사용자 중심의 기후변화 시나리오 상세화 기법 개발 및 한반도 적용 (User-Centered Climate Change Scenarios Technique Development and Application of Korean Peninsula)

  • 조재필;정임국;조원일;황세운
    • 한국기후변화학회지
    • /
    • 제9권1호
    • /
    • pp.13-29
    • /
    • 2018
  • This study presented evaluation procedure for selecting appropriate GCMs and downscaling method by focusing on the climate extreme indices suitable for climate change adaptation. The procedure includes six stages of processes as follows: 1) exclusion of unsuitable GCM through raw GCM analysis before bias correction; 2) calculation of the climate extreme indices and selection of downscaling method by evaluating reproducibility for the past and distortion rate for the future period; 3) selection of downscaling method based on evaluation of reproducibility of spatial correlation among weather stations; and 4) MME calculation using weight factors and evaluation of uncertainty range depending on number of GCMs. The presented procedure was applied to 60 weather stations where there are observed data for the past 30 year period on Korea Peninsula. First, 22 GCMs were selected through the evaluation of the spatio-temporal reproducibility of 29 GCMs. Between Simple Quantile Mapping (SQM) and Spatial Disaggregation Quantile Delta Mapping (SDQDM) methods, SQM was selected based on the reproducibility of 27 climate extreme indices for the past and reproducibility evaluation of spatial correlation in precipitation and temperature. Total precipitation (prcptot) and annual 1-day maximum precipitation (rx1day), which is respectively related to water supply and floods, were selected and MME-based future projections were estimated for near-future (2010-2039), the mid-future (2040-2069), and the far-future (2070-2099) based on the weight factors by GCM. The prcptot and rx1day increased as time goes farther from the near-future to the far-future and RCP 8.5 showed a higher rate of increase in both indices compared to RCP 4.5 scenario. It was also found that use of 20 GCM out of 22 explains 80% of the overall variation in all combinations of RCP scenarios and future periods. The result of this study is an example of an application in Korea Peninsula and APCC Integrated Modeling Solution (AIMS) can be utilized in various areas and fields if users want to apply the proposed procedure directly to a target area.

대용량 고해상 위성영상처리 시스템 개발 (Development of an Image Processing System for the Large Size High Resolution Satellite Images)

  • 김경옥;양영규;안충현
    • 대한원격탐사학회지
    • /
    • 제14권4호
    • /
    • pp.376-391
    • /
    • 1998
  • 위성의 발달에 따라 고해상영상이 등장하게 되었고 지표상태 분석에 매우 유용하게 되었다. GeoWatch는 지능형 영상처리 시스템으로서, 고해상도 영상을 이용하여 디지타이징, 지리보정, 강조, 여러 가지 연산, 식생지수 분석, 등을 하여 지표면 분석 등을 할 수 있는 시스템이다. 도한 지능형 분석 방법등 여러 가지 기법을 이용하여 변화지역분석, 토지 분류, 도시정보추출 등을 수행한다. 이 시스템의 강점은 full scene 영상같은 대용량 영상을 다룰 경우 역동적인 알고리즘 저장 방식을 채택하였고, 자동메뉴 생성, 사용자 편의를 위한 비쥬얼 프로그래밍 환경 등을 제공한다. 이 시스템은 또한 위성영상 위에 벡터를 중첩하여 분석하거나 수정 작업을 할 수 있고, 3차원 비행 시뮬레이션도 가능하다. 이 시스템은 영상 처리 모듈 외에도 영상 변환 및 수정 유틸리티 기능을 많이 제공한다. 본 논문에서는 또한 지능형 영상 분석 방법 뿐만 아니라, 대용량처리나, 비쥬얼 프로그램을 위한 디자인 개념을 제공한다.

Effect of Burnout on Post-traumatic Stress Disorder Symptoms Among Firefighters in Korea: Data From the Firefighter Research on Enhancement of Safety & Health (FRESH)

  • Kim, Woojin;Bae, Munjoo;Chang, Sei-Jin;Yoon, Jin-Ha;Jeong, Da Yee;Hyun, Dae-Sung;Ryu, Hye-Yoon;Park, Ki-Soo;Kim, Mi-Ji;Kim, Changsoo
    • Journal of Preventive Medicine and Public Health
    • /
    • 제52권6호
    • /
    • pp.345-354
    • /
    • 2019
  • Objectives: It is well-known that post-traumatic stress disorder (PTSD) among firefighters contributes to their job-related stress. However, the relationship between burnout and PTSD in firefighters has rarely been studied. This study therefore explored the association between burnout and its related factors, such as trauma and violence, and PTSD symptoms among firefighters in Korea. Methods: A total of 535 firefighters participated in the Firefighter Research on Enhancement of Safety & Health study at 3 university hospitals from 2016 to 2017. The 535 participants received a baseline health examination, including questionnaires assessing their mental health. A Web-based survey was also conducted to collect data on job-related stress, history of exposure to violence, burnout, and trauma experience. The associations among burnout, its related factors, and PTSD symptoms were investigated using structural equation modeling. Results: Job demands (${\beta}=0.411$, p<0.001) and effort-reward balance (${\beta}=-0.290$, p<0.001) were significantly related to burnout. Burnout (${\beta}=0.237$, p<0.001) and violence (${\beta}=0.123$, p=0.014) were significantly related to PTSD risk. Trauma (${\beta}=0.131$, p=0.001) was significantly related to burnout; however, trauma was not directly associated with PTSD scores (${\beta}=0.085$, p=0.081). Conclusions: Our results show that burnout and psychological, sexual, and physical violence at the hands of clients directly affected participants' PTSD symptoms. Burnout mediated the relationship between trauma experience and PTSD.

차세대 중형위성 탑재 X-밴드 안테나 구동용 전자유닛 APD 열설계 및 열해석 (Thermal Design of Electronic for Controlling X-band Antenna of Compact Advanced Satellite)

  • 김혜인;유창목;강은수;오현웅
    • 항공우주시스템공학회지
    • /
    • 제12권1호
    • /
    • pp.57-67
    • /
    • 2018
  • APD (Antenna Pointing Driver)는 차세대 중형위성에 탑재되는 위성 데이터 전송용 2축 짐벌식 X-밴드 안테나를 구동하기 위한 전장품이다. 전장품에 탑재된 EEE (Electrical, Electronic and Electromechanical) 소자의 열소산은 소자의 효율과 수명, 신뢰도에 직접적으로 영향을 미치게 되며, 종국에는 소자 자체의 파손으로 위성 전체 시스템의 실패를 초래할 수 있다. 임무기간동안 전장품의 신뢰성을 보장하기 위해 EEE 소자의 접합온도는 중요한 설계요소가 되며, 허용범위 내에서 확보되어야 한다. 따라서 사전에 소자의 감쇄비를 고려한 열해석이 반드시 수행되어야하며, 이를 위해 적절한 열해석모델을 구축하여야한다. 본 논문에서는 APD의 온도 요구조건 만족여부를 확인하기 위해 열설계 및 열해석을 수행하였으며, 이와 더불어 각 모델링 기법에 따른 열해석모델의 유효성을 비교, 분석하였다.

뉴스 빅데이터를 통해 검토한 대학교육의 토픽 분석 (A Topic Analysis of College Education Using Big Data of News Articles)

  • 양지연;구정호
    • 디지털융복합연구
    • /
    • 제19권12호
    • /
    • pp.11-20
    • /
    • 2021
  • 본 연구는 신문기사 빅데이터를 통해 대학교육 관련 보도의 토픽을 추출하고, 토픽별 특징 및 신문사별 보도양상을 분석한다. 2016년-2021년 상반기 주요 중앙지와 지역지의 기사를 빅카인즈를 통해 추출하였고, 잠재디리슐레할당을 이용하여 총 9개의 토픽을 발견하였다. 토픽1과 토픽3은 교육에 대한 대학지원사업에 관련된 것이나 토픽3은 지역대학에 초점이 맞추어져 있다. 토픽2는 코로나19 이후 대학교육, 토픽4는 교수-학습법, 토픽5는 정부정책, 토픽6은 고교교육기여대학 지원사업, 토픽7은 대학교육 비전, 토픽8은 국제화, 토픽9는 입시 등을 논하고 있다. 조선일보, 경향신문, 한겨레는 코로나19 이후 강의, 정부정책 관련, 대학교육에 대한 기사와 논평을 많이 보도한 반면 동아일보, 중앙일보, 한라일보, 부산일보, 대전일보, 경인일보는 대학지원사업, 고교교육기여대학 지원사업 등 광고·홍보성 기사가 상대적으로 많았다. 2016년부터의 관련기사를 신문사별 뿐 아니라, COVID-19 발생 전후로도 분석하여 관련 보도의 토픽 차이를 살펴볼 수 있었다. 사회적으로 주요 관심 사항인 대학교육이 언론에 어떻게 보도되고 있는지 확인함으로써 미래의 대학교육 정책 방향과 미디어의 순기능과 역기능 등 언론의 역할에 대해 고찰할 필요가 있음을 시사한다.

순환 심층 신경망 모델을 이용한 전용회선 트래픽 예측 (Leased Line Traffic Prediction Using a Recurrent Deep Neural Network Model)

  • 이인규;송미화
    • 정보처리학회논문지:소프트웨어 및 데이터공학
    • /
    • 제10권10호
    • /
    • pp.391-398
    • /
    • 2021
  • 전용회선은 데이터 전송에 있어서 연결된 두 지역을 독점적으로 사용하는 구조이기 때문에 안정된 품질수준과 보안성이 확보되어 교환회선의 급격한 증가에도 불구하고 기업 내부에서는 지속적으로 많이 사용하는 회선 방식이다. 하지만 비용이 상대적으로 고가이기 때문에 기업 내 네트워크 운영자의 중요한 역할 중의 하나는 네트워크 전용회선의 자원을 적절히 배치하고 활용하여 최적의 상태를 유지하는 것이 중요한 요소이다. 즉, 비즈니스 서비스 요구 사항을 적절히 지원하기 위해서는 데이터 전송 관점에서 전용회선의 대역폭 자원에 대한 적절한 관리가 필수적이며 전용회선 사용량을 적절히 예측하고 관리하는 것이 핵심 요소가 된다. 이에 본 연구에서는 기업 네트워크에서 사용하는 전용회선의 실제 사용률 데이터를 기반으로 다양한 예측 모형을 적용하고 성능을 평가하였다. 일반적으로 통계적인 방법으로 많이 사용하는 평활화 기법 및 ARIMA 모형과 요즘 많은 연구가 되고 있는 인공신경망에 기반한 딥러닝의 대표적인 모형들을 적용하여 각각의 예측에 대한 성능을 측정하고 비교하였다. 또한, 실험결과에 기초하여 전용회선 자원의 효과적인 운영 관점에서 각 모형이 예측에 대하여 좋은 성능을 내기 위하여 고려해야 할 사항을 제안하였다.

Three-Dimensional Printing Assisted Preoperative Surgical Planning for Cerebral Arteriovenous Malformation

  • Uzunoglu, Inan;Kizmazoglu, Ceren;Husemoglu, Resit Bugra;Gurkan, Gokhan;Uzunoglu, Cansu;Atar, Murat;Cakir, Volkan;Aydin, Hasan Emre;Sayin, Murat;Yuceer, Nurullah
    • Journal of Korean Neurosurgical Society
    • /
    • 제64권6호
    • /
    • pp.882-890
    • /
    • 2021
  • Objective : The aim of this study to investigate the benefits of patient-based 3-dimensional (3D) cerebral arteriovenous malformation (AVM) models for preoperative surgical planning and education. Methods : Fifteen patients were operated on for AVMs between 2015 and 2019 with patient-based 3D models. Ten patients' preoperative cranial angiogram screenings were evaluated preoperatively or perioperatively via patient-based 3D models. Two patients needed emergent surgical intervention; their models were solely designed based on their AVMs and used during the operation. However, the other patients who underwent elective surgery had the modeling starting from the skull base. These models were used both preoperatively and perioperatively. The benefits of patients arising from treatment with these models were evaluated via patient files and radiological data. Results : Fifteen patients (10 males and five females) between 16 and 66 years underwent surgery. The mean age of the patients was 40.0±14.72. The most frequent symptom patients observed were headaches. Four patients had intracranial bleeding; the symptom of admission was a loss of consciousness. Two patients (13.3%) belonged to Spetzler-Martin (SM) grade I, four (26.7%) belonged to SM grade II, eight (53.3%) belonged to SM grade III, and one (6.7%) belonged to SM grade IV. The mean operation duration was 3.44±0.47 hours. Three patients (20%) developed transient neurologic deficits postoperatively, whereas three other patients died (20%). Conclusion : Several technological innovations have emerged in recent years to reduce undesired outcomes and support the surgical team. For example, 3D models have been employed in various surgical procedures in the last decade. The routine usage of patient-based 3D models will not only support better surgical planning and practice, but it will also be useful in educating assistants and explaining the situation to the patient as well.

제품-기술로드맵 개발을 강화하기 위한 예측모델링에 관한 실증 연구 (An Empirical Study on Predictive Modeling to enhance the Product-Technical Roadmap)

  • 박기곤;김영준
    • 기술혁신연구
    • /
    • 제29권4호
    • /
    • pp.1-30
    • /
    • 2021
  • 최근 시스템 반도체 발전으로 인하여 자동차 산업의 전장(電裝)에 대한 기술혁신이 빠르게 진행되고 있다. 특히, 자동차의 전장화는 자동차 부품업체들의 기술개발 경쟁을 가속화시키고 있으며, 개발 주기 또한 빠르게 변화하고 있다. 이러한 변화로 인하여 연구개발에 대한 전략과 기획의 중요성은 더욱 강화되고 있다. 자동차 산업의 패러다임 변화로 인하여, 연구개발 전략 중의 하나인 제품-기술로드맵(P/TRM)은 기획 단계에서 기술예측, 기업의 기술수준평가, 기술획득방법(Make/Collaborate/Buy) 등의 분석을 통하여 개발이 이루어져야 한다. 제품-기술로드맵은 제품과 기술의 고객 니즈를 파악하고 기술의 선정, 개발방향을 설정하는 툴(Tool)로써, 미래의 발전방향 추세를 예측하고 매크로(Macro) 트랜드의 전략적 방향성과 목표를 설정하는데 사용된다. 하지만, 대부분의 기업에서는 해당 기술의 논문이나 특허 분석, 전문가 델파이에 주로 의존하는 정성적인 방법을 통하여 제품-기술로드맵을 개발하고 있다. 본 연구는 가트너의 하이프 사이클과 누적이동평균 기반 데이터 전처리, 딥러닝(LSTM) 시계열 분석 기법을 융합하여 자동차 산업 중심으로 제품-기술로드맵을 보완하고 강화시킬 수 있는 시뮬레이션을 통하여 실증 연구를 진행하였다. 본 논문에서 제시한 실증 연구는 자동차 산업 뿐만 아니라, 범용적으로 타제조업 분야에서도 사용 가능할 수 있다. 또한, 기업적인 측면에서는 그동안 정성적인 방법에 의존하던 로드맵 작성 방법에서 탈피하여 좀 더 정확한 제품-기술로드맵을 통하여 적기에 시장에 제품을 제공함으로써 선도업체로 나아가기 위한 밑거름이 될 것이라고 사료된다.

국내 디클로로메탄 제조·사용 사업장 근로자의 공정별 노출수준에 대한 작업환경측정값과 ECETOC TRA 모델값 비교연구 (Comparative Study of Korean Workers' Exposure to Dichloromethane by Process Category between Work Environment Monitoring Program and ECETOC TRA)

  • 정수진;배계완;이나루
    • 한국산업보건학회지
    • /
    • 제31권4호
    • /
    • pp.317-330
    • /
    • 2021
  • Objectives: By law, companies in Korea must periodically measure workers' exposure to harmful chemicals (the system is called the Work Environment Monitoring Program (WMP)[a]) and report the results to the government. The government also measures exposure to monitor the WMP's reliability (called Reliability Assessment (RA) for WMP[b]). The issue is that measured data from these two sources are so different that the objectivity of WMP needs to be confirmed by comparing the results using the European Centre for Ecotoxicology and Toxicology of Chemicals' Targeted Risk Assessment (ECETOC TRA). Methods: Step 1: Data collection from WMP reports submitted by companies (n=586) and RA for WMP written by the government (n=33). Step 2: Data Standardization by key information included. Step 3: Data conversion to input-variables required to run the ECETOC TRA model, and run the model with specific data (n=514) which meet the predetermined exposure scenario. Step 4: Statistical data analysis by process category (PROC) and ventilation type from each source ([A] and [B]). Step 5: Additional analysis of any unexpected results. Results: The process categories of the production and handling of Dichloromethane were classified into 12 PROCs, and ten of them were selected to run ECETOC TRA. Modeled values tended to be higher than measured values from both sources. For the measured values from WMP, RCR distribution by PROC was narrow (0.197-0.267, 95% CI) and did not have a relationship with ventilation type, which differs from the tendency of the modeling result. Meanwhile, the measured values from RA for WMP were relatively widely distributed (0.301-1.177, 95% CI) by PROC. In particular PROCs (13,19) were high enough to exceed 1. Also, they become low with better ventilation types and appear differently depending on the ventilation type, similar to the model result. Conclusions: This study revealed that ECETOC TRA might have the potential to serve as a screening tool for exposure assessment and to be used as assistive method for WMP to estimate exposure. Further empirical study is required to confirm its availability as a screening tool.