• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.297-300
• /
• 2001

Physical modeling technique is applied to investigate foam generation in molten aluminum. By using room temperature water with specially designed equipment, the effects of stirrer type, fluid viscosity(glycerine added to water) and stirring velocity on foam generation behaviors are intensively analysed The distribution and size of bubbles varied with each process parameters but the most important parameters are stirring velocity and fluid viscosity. The results obtained from physical simulation have been confirmed by actual aluminum foam generation experiment at various process variables.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.6
• /
• pp.498-516
• /
• 2013

Combat Modeling and Simulation (M&S) is significant to decision makers who predict the next direction of wars. Classical methodologies for combat M&S aimed to describe the exact behaviors of combat entities from military doctrines, yet they had a limitation of describing reasonable behaviors of combat entities that did not appear in the doctrines. Hence, this paper proposed a synthesizing modeling methodology for combat entity models considering both 1) the exact behaviors using descriptive modeling and 2) the reasonable behaviors using prescriptive modeling. With the proposed methodology, combat entities can represent a reality for combat actions rather than the classical methodologies. Moreover, the experiment results using the proposed methodology were significantly different from the results using the classical methodologies. Through the analyses of the experiment results, we showed that the reasonable behaviors of combat entities, which are not specified in the doctrines, should be considered in combat M&S.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.165-166
• /
• 2007

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.579-583
• /
• 2011

The component based propulsion modeling and simulation of an air-breathing engine such as ramjet and scramjet is studied. The simulation model has been realized considering the characteristics of the air-breathing engine which is composed of air intake, combustor and nozzle including engine controller and fuel supply system. To estimate the engine performance and to verify the engine controller, real time based Hardware in the Loop System simulating actual environment is constructed.

• Advances in Computational Design
• /
• v.4 no.2
• /
• pp.91-118
• /
• 2019

Every year, many people are severely injured or lose their lives in accidents such as fire, chemical spill, public pandemonium, school shooting, and workplace violence. Research indicates that the fate of people in an emergency situation involving one or more hazards depends not only on the design of the space (e.g., residential building, industrial facility, shopping mall, sports stadium, school, concert hall) in which the incident occurs, but also on a host of other factors including but not limited to (a) occupants' characteristics, (b) level of familiarity with and cognition of the surroundings, and (c) effectiveness of hazard intervention systems. In this paper, we present EVAQ, a simulation framework for modeling large crowd evacuation by taking into account occupants' behaviors and interactions during an emergency. In particular, human's personal (i.e., age, gender, disability) and interpersonal (i.e., group behavior and interactions) attributes are parameterized in a hazard-impacted environment. In addition, different hazard types (e.g., fire, lone wolf attacker) and propagation patterns, as well as intervention schemes (simulating building repellent systems, firefighters, law enforcement) are modeled. Next, the application of EVAQ to crowd egress planning in an airport terminal under human attack, and a shopping mall in fire emergency are presented and results are discussed. Finally, a validation test is performed using real world data from a past building fire incident to assess the reliability and integrity of EVAQ in comparison with existing evacuation modeling tools.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.1
• /
• pp.1-11
• /
• 2013

The aim of this study was estimated the characteristics of the wave propagation by the water level conditions using a numerical modeling method at the Wando sea area. For three cases numerical simulation on the condition of incident and incoming of the deepwater design wave and the season normal wave, the spatial distribution of the incident wave at study area were investigated. And the calculated numerical modeling results were compared with measured field wave data. According to on-site wave data measured for 18 days, the range of the significant wave height and period were 0.10~1.14 m, 4.35~8.74 sec, respectively, and the maximum wave height were 0.15~1.66 m. From the results of numerical model for offshore design wave incident, the wave height attacked from Southern-East direction at this study area were over maximum 10.5 m because of rapidly change of water depth. Numerical modeling by three water level conditions of Approxmate Lowest Low Water Level(Approx. L.L.W), Mean Sea Level(M.S.L) and Approximate Highest High Water Level(Approx. H.H.W) were practiced. From the results for the case of Approx. H.W.L, variations of wave height at the back area of islands were about 1.6 m at maximum value for the case of deepwater design wave incoming. The significant wave heights of winter season were bigger than summer under normal wave condition, the incident wave height over 5.5 m decreased by shielding effect of islands. The change of maximum wave height at summer season were distinct than winter and was about 1.2 m and 0.8 m, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2227-2232
• /
• 2013

To obtain the system requirement specification in the beginning of the precision guidance system development, the effectiveness and reliability analysis for the system are necessary. The main purpose of this research is to obtain the system requirement specification for the high speed unmanned underwater vehicles by carrying out the effectiveness analysis using the modeling and simulation scheme. The effectiveness is position error for target position. Reaching accuracy is expected to be affected by the navigation sensor parameter. Assume that the navigation sensors that is consist of inertial navigation system(INS) and doppler velocity log(DVL) is the parameter. To analyze the effectiveness of each parameter, Monte-Carlo numerical simulation is performed in this research. The effectiveness analysis is carried out using circular error probability(CEP) and variance analyze scheme. Considering the cost function, the specification of the navigation sensor is provided. The cost function is consist of the INS and DVL specification and the price of those sensors.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.121-126
• /
• 2014

ETRI(Electronics and Telecommunication Research Institute) has joined National GNSS Research Center program of Defense Acquisition Program Administration and Agency for Defense Development in 2010. The research subject is technology for MSAR(Military Search and Rescue) system configuration. In this project, we analyses the ways in order to improve the accuracy, reliability, availability for MSAR system from M&S(Modeling and Simulation). The MSAR System M&S Software can be used for performance analysis of new elements, such as ground elements and satellite elements without any hardware development. In this paper, after introduction of the architecture design and functional scope of the simulator, the performance analysis result for MSAR M&S software is presented.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.2
• /
• pp.73-90
• /
• 2018

Various navigation systems are integrated with the Global Navigation Satellite System (GNSS) to improve navigation performance so that continuous navigation information can be obtained even when navigation performance is degraded or navigation is not available due to the outage of GNSS. Time and cost can be reduced by evaluating performance of the integrated navigation system through Modeling and Simulation (M&S) software prior to the deployment of the integrated navigation system. The measurements of the navigation system should be generated to evaluate performance through of the navigation system M&S software. This paper proposes a method of designing a navigation environment generation module in M&S software of the integrated navigation system. To show applicability of the proposed method to M&S software design of the integrated navigation system, functions are verified through MATLAB. And then visual C++ based M&S software for the integrated navigation system is implemented to check the operation of the navigation environment generation module. The reference trajectory is generated and true measurements of Global Positioning System (GPS), Korea Positioning System (KPS), and enhanced Long range navigation (eLoran) are generated from the reference trajectory. The navigation results obtained from the true measurements are compared with the reference trajectories. The results show that the measurements generated using the design generation module by the proposed method are valid and the navigation environment generation module can be applied to M&S software of the integrated navigation system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.71-81
• /
• 2014

It is an important issue to evaluate the effectiveness of chemical warfare through modeling and simulation(M&S) technology. In this paper, we propose the M&S methodology and environment for the chemical warfare for effectiveness analysis. In detail, for modeling perspective, we propose three fundamental component models according to their behaviors, which are a chemical weapon, a detecting device system, and an engaging unit system. Among proposed models, the chemical weapon and the detecting device system models are represented by engineering-level system models, whereas the engaging unit system model are described as an engagement-level system model. For simulation perspective, we apply a hybrid simulation environment using High Level Architecture (HLA) to interoperate with the proposed engineering and engagement-level models. The proposed M&S methodology and environment enables to evaluate the effectiveness of the chemical warfare system considering the doctrines, the performance of device or weapon, and weather factors. To verify the efficiency of the proposed methodology and environment, we experimented three categorized case studies, which are related with those considering factors.