• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.9
• /
• pp.59-70
• /
• 2020

Three-dimensional (3D) design data is used for various purposes throughout the life cycle of a plant construction project. Plant 3D CAD systems support 3D modeling based on specs-catalogs, which contain data that are used for different purposes such as design, procurement, production, and handover. Therefore, it is important to share the spec-catalog data in the 3D design model with other application systems. Sharing this data thus requires a system that extracts spec-catalog data from plant 3D CAD systems and converts them into neutral model data. In this paper, we analyze equipment spec-catalog data of plant 3D CAD systems and, based on these analyses, define the data structure for neutral spec-catalog data. We subsequently propose a procedure that translates native spec-catalog data to neutral model data and develop a prototype system that performs this operation. The proposed method is then experimentally validated for the test spec-catalog data.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.6
• /
• pp.1-8
• /
• 2020

This paper proposes a method for measuring friction forces and creating a friction model for a rotary motion control system as well as an autonomous vehicle testbed. The friction forces versus the velocity were measured, and the viscous friction, Coulomb friction, and stiction were identified. With a nominal PID (proportional-integral-derivative) controller, we observed the adverse effects due to friction, such as excessive steady-state errors, oscillations, and limit-cycles. By adding an adequate friction model as part of the augmented nonlinear dynamics of a plant, we were able to conduct a simulation study of a motion control system that well matched experimental results. We have observed that the implementation of a model-based friction compensator improves the overall performance of both motion control systems, i.e., the rotary motion control system and the Altino testbed for autonomous vehicle development. By utilizing a better simulation tool with an embedded friction model, we expect that the overall development time and cost can be reduced.

• Journal of the military operations research society of Korea
• /
• v.6 no.1
• /
• pp.93-101
• /
• 1980

An effectively designed budget system in the poor resources environment necessarily has three design criteria : (i) to be both planning-oriented and control-oriented, (ii) to be both rationalistic and realistic, (iii) to be sensitive to the variations of resources environment. PPB system is an extreme (planning-oriented and rationalistic) and conventional OEB/OUB system is the other extreme (control-oriented and incrementalistic). Generally, the merits of rationalism are limited because of the infeasibility of applications. Hence, mixtures of the two extremes such as MBO, ZBB, and RZBB have been examined and applied during the last decade. The classical mathematical models of capital budgeting are the starting points of the development of the Budget-Mix Model introduced in this paper. They are modified by the followings: (i) technological-resource constraints, (ii) bounded-variable constraint, (iii) the exchange rules. Special emphasis is laid on the above (iii), because we need more efficient interresource exchanges in the budget-mix process. The Budget-Mix Model is not based on optimization, but a heuristic approach which assures a satisficing solution. And the application fields of this model range between the incremental Nonzero-Base Budgeting and the rational Zero-Base Budgeting. In this thesis, the author suggests 'the budget- mix concept' and a budget-mix model. Budget-mix is a decision process of making program-mix and resource-mix together. For keeping this concept in the existing organization realistic, we need the development of quantitative models describing budget-mix situations.

• International Journal of Reliability and Applications
• /
• v.17 no.2
• /
• pp.149-158
• /
• 2016

We are enjoying a very comfortable life thanks to modern civilization, however, comfort is not guaranteed to us. Development of software system is a difficult and complex process. Therefore, the main focus of software development is on improving the reliability and stability of a software system. We have become aware of the importance of developing software reliability models and have begun to develop software reliability models. NHPP software reliability models have been developed through the fault intensity rate function and the mean value functions within a controlled testing environment to estimate reliability metrics such as the number of residual faults, failure rate, and reliability of the software. In this paper, we present a new NHPP software reliability model with Burr Type III fault detection rate, and present the goodness-of-fit of the fault detection rate software reliability model and other NHPP models based on two datasets of software testing data. The results show that the proposed model fits significantly better than other NHPP software reliability models.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.6
• /
• pp.488-498
• /
• 2015

This paper presents the dynamic model of an AUV called HW200 for underwater surveillance. The mathematical model of HW200 is briefly introduced, considering its shape. The maneuvering coefficients were initially estimated using empirical formulas and a database of vehicles with similar shapes. A motion simulator, based on Simulink of Mathworks, was developed to evaluate the mathematical model of the vehicle and to tune the maneuvering coefficients. The parameters were finely tuned by comparing the experimental results and simulated responses generated with the simulator by applying the same control inputs as the experiment. The velocity of HW200 in the tuning process was fixed at a constant forward speed of 1.83 m/s. Simulations with variable speed commands were conducted, and the results showed good consistency in the motion response, attitude, and velocity of the vehicle, which were similar to those of the experiment even under the speed variation. This paper also discusses the feasibility of its application to a model-based integrated navigation system (INS) using the auxiliary information on the velocities generated by the model.

• The KIPS Transactions:PartD
• /
• v.12D no.2 s.98
• /
• pp.267-274
• /
• 2005

New game softwares usually have much similarities with old one in the sense of properties and procedures. But nevertheless, the development could be duplicated several times without referencing or reusing of others. In addition, because there is no standardized process about the game engine, the products generated by other software development processes are difficult to understand and to reuse. Therefore, the enterprise developing new game software newly analyze and design although it is same process as the old one. This paper proposes the improved process of the game engine, analysis of structures and relations, classification of the class and the module and their combination methods, implementation of storage, and processor model to apply the component based development method to the game engine.

• Steel and Composite Structures
• /
• v.21 no.3
• /
• pp.553-571
• /
• 2016

The progressive collapse potential of steel moment framed structures due to abrupt removal of a column is investigated based on the energy principle. Based on the changes of component's internal energy, this paper analyzes structural member's sensitivity to abrupt removal of a column to determine a sub-structure resisting progressive collapse. An energy-based structural damage index is defined to judge whether progressive collapse occurs in a structure. Then, a simplified beam damage model is proposed to analyze the energies absorbed and dissipated by structural beams at large deflections, and a simplified modified plastic hinges model is developed to consider catenary action in beams. In addition, the correlation between bending moment and axial force in a beam during the whole deformation development process is analyzed and modified, which shows good agreement with the experimental results.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.3
• /
• pp.291-299
• /
• 2018

Under a pyro-processing concept, an electrolytic reduction process has been developed to reduce uranium oxide in molten salt by electrochemical means as a part of spent fuel treatment process development. Accordingly, a model based on electrochemical theory is required to design a reactor for the electrolytic reduction process. In this study, a 1D model based on the phase-field theory, which explains phase separation behaviors was developed to simulate electrolytic reduction of uranium oxide. By adopting parameters for diffusion of oxygen elements in a pellet and electrochemical reaction rate at the surface of the pellet, the model described the behavior of inward reduction well and revealed that the current depends on the internal diffusion of the oxygen element. The model for the electrolytic reduction is expected to be used to determine the optimum conditions for large scale reactor design. It is also expected that the model will be applied to simulate the integration of pyro-processing.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.2
• /
• pp.11-18
• /
• 2021

A community-centered smart village process model was developed through the theoretical review of the rural field forum. By analyzing the difference in technology demand according to the digital capabilities of leaders by community type, village types were classified and detailed technologies were defined. The smart village process was proposed to enable residents to operate autonomously by inducing continuous interest and participation of local residents through the conception stage, planning stage, implementation and self-reliance stage, and allowing them to cooperate together. The business model canvas was reconstructed to be used in the workshop. It was applied to the village of Yesan-gun. As a result of running a resident workshop using the business model Cambus, the lack of resident awareness and illegal garbage dumping were presented as the first problems to be solved. The value of the village was set as 'a village that is clean and clean with a sense of residents, and a good place to live', and users were expressed as 'family' and 'outsiders'. It was suggested that we meet frequently to convey the value of the village by using broadcasting and announcements as a channel to convey the value. Core activities were to cultivate residents' consciousness, such as implementing a campaign against illegal garbage dumping, and to establish and guide separate collection sites. When a garbage collection center is installed, it was estimated that around 2 million won per month for management costs, and it was investigated that it was possible to spend an hour or so twice a month to solve the problem of illegal dumping. If a method to derive village projects based on the derived business model canvas is developed in the future, it will be more practical.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.4
• /
• pp.85-98
• /
• 2002

The purpose of this study is to develop a land use planning model (LUPM) which can be applied to development of rural villages considering their spatial expansion. The LUPM finds out and allocates the new built site required for the improvement of existing villages. in the development of LUPM, CA (cellular automata) and land suitability analysis methods were applied combinedly. The model uses basically numerical data of CIS based on grid data. Agglomerated settlement, as a type of village for simulation, was adopted. Probability of land use change for optimizing development area was calculated by the six criteria: slope. drainage characteristic, direction of slope, as absolute suitability of grid itself, distance from road. distance from stream and distance from the village center, as relative probability by neighborhood cells. Weighting values of these criteria were quantified by AHP (analytic hierarchy process) method, which is one of MCE(multi-criteria evaluation) method. The algorithm of the model was verified by three example villages: an isolation village, a village with horizontal road, and a village with nodal point of cross road