• 대한기계학회논문집B
• /
• 제29권11호
• /
• pp.1220-1228
• /
• 2005

Fault detection and diagnostic (FDD) systems have the potential to reduce equipment downtime, service costs, and utility costs. In this study, model based algorithm and fuzzy algorithm were used to detect and diagnose various fault at System multi-air conditioner. various fault include the Refrigerant Low charging, Fouling of Indoor Heat Exchanger, Fouling of Outdoor Heat Exchanger A experimental verification was conducted in the 6HP System multi-air conditioner on an 8-floor building. Test results showed diagnosis result about 78 $\~$ 90$\%$ for given faults. This Study lays the foundation fur future work on develope the real-time fault detection and diagnosis system for the System multi-air conditioner.

• Journal of Information Processing Systems
• /
• 제17권2호
• /
• pp.242-252
• /
• 2021

Following the intuition that the local information in time instances is hardly incorporated into the posterior sequence in long short-term memory (LSTM), this paper proposes an attention augmented mechanism for fault diagnosis of the complex chemical process data. Unlike conventional fault diagnosis and classification methods, an attention mechanism layer architecture is introduced to detect and focus on local temporal information. The augmented deep network results preserve each local instance's importance and contribution and allow the interpretable feature representation and classification simultaneously. The comprehensive comparative analyses demonstrate that the developed model has a high-quality fault classification rate of 95.49%, on average. The results are comparable to those obtained using various other techniques for the Tennessee Eastman benchmark process.

• Nuclear Engineering and Technology
• /
• 제46권6호
• /
• pp.753-772
• /
• 2014

The paper presents functional modelling and its application for diagnosis in nuclear power plants. Functional modelling is defined and its relevance for coping with the complexity of diagnosis in large scale systems like nuclear plants is explained. The diagnosis task is analyzed and it is demonstrated that the levels of abstraction in models for diagnosis must reflect plant knowledge about goals and functions which is represented in functional modelling. Multilevel flow modelling (MFM), which is a method for functional modelling, is introduced briefly and illustrated with a cooling system example. The use of MFM for reasoning about causes and consequences is explained in detail and demonstrated using the reasoning tool, the MFMSuite. MFM applications in nuclear power systems are described by two examples: a PWR; and an FBR reactor. The PWR example show how MFM can be used to model and reason about operating modes. The FBR example illustrates how the modelling development effort can be managed by proper strategies including decomposition and reuse.

• 한국지능시스템학회논문지
• /
• 제14권7호
• /
• pp.830-837
• /
• 2004

본 논문에서는 비선형시스템에서 발생한 고장을 감지하고 분류하기 위한 신경회로망기반 고장진단 방법을 제안한다. 제안한 알고리듬에서는 시스템의 출력과 다층신경회로망 공칭모델 출력 사이의 오차가 미리 설정한 문턱값을 넘으면 고장을 감지한다. 고장이 감지되면 다층신경회로망과 ART2 신경회로망을 이용한 고장분류기에서 시스템에서 발생한 고장을 분류한다. 컴퓨터 시뮬레이션 결과로부터 제안한 고장진단방법이 비선형시스템에서의 고장감지 및 분류문제에 잘 적용됨을 알 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1489-1492
• /
• 1997

To increase reliability and performance of an IMS(Intelligent Manufacturing System), fault tolerant control based on an accurate fault diagnosis is needed. In this paper, robot FDI(fault detection and identification) is proposed for IMS where the robot is controlled with state estimates of a nonlinear filter using a mathematical robot model. The Chi-square distribution is applied fault detection and fault size is estimated by a proposed bias filter. Performance of the proposed algorithm is tested by simulation for studies.

• 제어로봇시스템학회논문지
• /
• 제4권5호
• /
• pp.666-673
• /
• 1998

To increase reliability and performance of an IMS(Intelligent Manufacturing System), fault tolerant control based on an accurate fault diagnosis is needed. In this paper, robot FDI(fault detection and identification) is proposed for IMS where the robot is controlled with state estimates of a nonlinear filter using a mathematical robot model. The Chi-square test and GLR(General likelihood ratio) test are applied for fault detection and fault size is estimated by a proposed bias filter. Performance of the proposed algorithm is tested by simulation for studies.

• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.353-357
• /
• 2007

The bearing diagnostics method is presented in this paper using fuzzy inference based on vibration data. Both time-domain and frequency-domain features are used as input data for bearing fault detection. The Adaptive Network based Fuzzy Inference System (ANFIS) and Genetic Algorithm (GA) have been proposed to select the fuzzy model input and output parameters. Training results give the optimized fuzzy inference system for bearing diagnosis based on measured vibration data. The result is also tested with other sets of bearing data to illustrate the reliability of the chosen model.

• 한국가스학회지
• /
• 제4권4호
• /
• pp.42-49
• /
• 2000

대부분의 화학공정은 매우 크고 복잡하기 때문에 전체 공정에 대한 진단시스템을 만드는 것은 매우 어렵다. 따라서, 대형공정을 몇 개의 부공정으로 분할하여 진단하는 체계적인 방법이 필요하다. 이 논문에서는 이상-결과 트리모델에 기반하여 정성적 이상진단을 위한 공정분할전략을 제안하였다. 분할기준으로 유연한 진단, 지식베이스의 크기축소, 및 복잡한 지식베이스의 일관된 구축을 사용하였다 부공정간의 인과관계를 연결하기 위해 통로변수를 도입한 다음 오프라인 분석을 통해 통로변수의 이상-결과 트리모델을 구축하였다 계분할이 없는 경우와 같은 진단결과를 얻을 수 있도록 온라인 진단전략을 수립하였다 제안된 방법의 유용성을 대형 보일러 공정에 대한 이상진단시스템을 통해 보였다.

• 산업경영시스템학회지
• /
• 제46권2호
• /
• pp.168-175
• /
• 2023

In the era of the 4th Industrial Revolution, Logistic 4.0 using data-based technologies such as IoT, Bigdata, and AI is a keystone to logistics intelligence. In particular, the AI technology such as prognostics and health management for the maintenance of logistics facilities is being in the spotlight. In order to ensure the reliability of the facilities, Time-Based Maintenance (TBM) can be performed in every certain period of time, but this causes excessive maintenance costs and has limitations in preventing sudden failures and accidents. On the other hand, the predictive maintenance using AI fault diagnosis model can do not only overcome the limitation of TBM by automatically detecting abnormalities in logistics facilities, but also offer more advantages by predicting future failures and allowing proactive measures to ensure stable and reliable system management. In order to train and predict with AI machine learning model, data needs to be collected, processed, and analyzed. In this study, we have develop a system that utilizes an AI detection model that can detect abnormalities of logistics rotational equipment and diagnose their fault types. In the discussion, we will explain the entire experimental processes : experimental design, data collection procedure, signal processing methods, feature analysis methods, and the model development.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2041_2042
• /
• 2009

The diagnostic/prognostic problems for condition based maintenance or Prognostics and Health Management has been used. Primary objectives of diagnosis/prognosis are maximizing system availability and minimizing downtime from fault isolation through more effective troubleshooting efforts. Diagnosis aims to detect the onset of failures to improve system performance and reduce life cycle cost by reducing the failure time. The prognosis can reduce operational and support total ownership cost and improve safety of machinery and complex systems. In this Paper, a fault diagnosis methodology has been described using a monopropellant propulsion system model as a test bench.