• Journal of the Korean Geotechnical Society
• /
• 제38권7호
• /
• pp.49-62
• /
• 2022

The hollow modular concrete block reinforced foundation method is one of the ground reinforcement foundation methods that uses hexagonal honeycomb-shaped concrete blocks with mixed crushed rock to reinforce soft grounds. It then forms an artificial layered ground that increases bearing capacity and reduces settlement. The hollow modular honeycomb-shaped concrete block is a geometrically economical, stable structure that distributes forces in a balanced way. However, the behavioral characteristics of hollow modular concrete block reinforced foundations are not yet fully understood. In this study, a bearing capacity test is performed to analyze the reinforcement effectiveness of the hollow modular concrete block through the laboratory model tests. From the load-settlement curve, punching shear failure occurs under the unfilled sand condition (A-1-N). However, the filled sand condition (A-1-F) shows a linear curve without yielding, confirming the reinforcement effect is three times higher than that of unreinforced ground. The bearing capacity equation is proposed for the parts that have contact pressure under concrete, vertical stress of hollow blocks, and the inner skin friction force from horizontal stress by confining effect based on the schematic diagram of confining effect inside a hollow modular concrete block. As a result of calculating the bearing capacity, the percentage of load distribution for contact force on the area of concrete is about 65%, vertical force on the area of hollow is 16.5% and inner skin friction force of area of the inner wall is about 18.5%. When the surcharge load is applied to the concrete part, the vertical stress occurs on the area of the hollow part by confining effect first. Then, in the filled sand in the hollow where the horizontal direction is constrained, the inner skin friction force occurs by the horizontal stress on the inner wall of the hollow modular concrete block. The inner skin friction force suppresses the punching of the concrete part and reduces contact pressure.

• Journal of the Daesoon Academy of Sciences
• /
• 제27집
• /
• pp.283-317
• /
• 2016

This research is an attempt to detail the multi-layered ethical characteristics of 'mutual beneficence', shown in the principle of 'guarding against self-deception' in Daesoon Thought while focusing on its major differences as well as the similarities with Kantian and Utilitarian ethical views. In these Western ethical perspectives, the concept of self-deception has received a considerable amount of attention, centering on the context of natural rights and contract theory. Meanwhile, in Daesoon Thought, 'guarding against self-deception' is presented as one of the principal objectives as well as the method or deontological ground for practice. It further encompasses the features of virtue ethics oriented toward the perfection of Dao. Here, the deontological aspect is interlinked with the concept of cultivation and the pursuit of ethics and morals. Hence this makes it a necessary condition for achieving the perfection of Dao, and likewise renders the practice of 'guarding against self-deception' more active through facilitating mutual relations based on the expansion model wherein human nature is characterized as possessing innate goodness. With regard to the tenet of 'resolution of grievances for mutual beneficence,' this concept is presented as a positive ground for practicing virtues toward others without forming grudges. Furthermore, as long as it reveals the great principle of humanity built on conscience, it will come to harmonize practitioners with others and spirits in an expression of beneficence. Moreover, originating in the Dao of Deities, guarding against self-deception is expressed as a form of life ethics and can be suggested as a new alternative for the model of virtue ethics proposed by Nussbaum. All in all, there is a natural causal relationship by which 'guarding against self-deception' in accord one's own conscience and the principle of humanity as a pursuit of perfect virtues in Dao result in the fulfillment of mutual beneficence. This readily akin to how gravity causes water to flow from high ground to low ground. Consequently, these relational features of mutual beneficence can serve an effective alternative to the Western ethical views which also address the need to overcome the egoistic mind which is liable to self-interest and alienation.

• Asia Marketing Journal
• /
• 제12권3호
• /
• pp.43-62
• /
• 2010

The notion of customer orientation is now importantly considered in the context of banking industries. Despite customer-oriented organizational cultures, there are few studies addressing the relationship between customer orientation and its outcomes. In particular, this study aims at testing the effect of customer orientation as a key marketing effort designed by a bank. This is because interest rate sensitivity is critical for evaluating banking services after raising the base rate. In so doing, first, this study investigates the relationships among customer orientation, interest rate sensitivity, and customer loyalty. Second, this paper examines how the moderating effects of both deposit interest and loan interest rates influence the linkages of customer orientation-interest rate sensitivity and customer orientation-customer loyalty. To test the proposed model, research data are collected from 304 subjects who use banking services(e.g., Shin-Han, Kookmin, the First Bank, Hana, and Woori banks). Each construct was measured by published items and the psychometric properties of the three constructs, excluding two constructs of the moderators, were evaluated by employing the method of confirmatory factor analysis via the use of AMOS. The model fit was also evaluated using the CFI, TLI, and RMSEA fit indices that are recommended based on their relative stability and insensitivity to sample size. The findings show that the relationship between customer orientation and customer loyalty is significant, whereas the relationships between customer orientation and interest rate sensitivity and between interest rate sensitivity and customer loyalty are not supported. Although customer orientation is highly evaluated, customers' interest rate sensitivity that results in the comparison of interest rates plays an important role in reducing the effect of customer orientation. As a consequence, interest rate sensitivity does not influence customer loyalty. First of all, one of interesting results in this study is that the moderating effect of loan interest rate is quite different from deposit interest rate. In the case of deposit interest rate, the linkages both customer orientation-interest rate sensitivity and customer orientation-customer loyalty are insignificant. In the case of loan interest rate, however, the two proposed linkages are supported. As our proposed relationships are still in its infancy in the context of banking industry, our study contributes to enhance scholars' knowledge of bank services and provides insights for practitioners when their marketing strategies, particularly both deposit and interest rates, have to be established. Finally, this research also illuminates the need for further research that considers the influence of customer orientation on consumer's decision-making and bank profits. More specifically, the results are encouraging and will lead us to further investigate this key outcome of the banking deposit/interest rates.

• Journal of Christian Education in Korea
• /
• 제76권
• /
• pp.27-49
• /
• 2023

Purpose of study: The purpose of this paper is to gain insight into the alternative possibility of Christian children's education overcoming the current church school paradigm namely schooling system by examining the characteristics and the direction of children's spiritual education. Research content and method: This paper is a review of the characteristics of children's spiritual education and ways to embody those characteristics. Therefore, it consists of two parts: the characteristics of children's spiritual education and the search for ways to embody those characteristics. First, children's spiritual education is a "formative" model that aims to form children's spirituality based on children's spirituality research that views children as 'spiritual beings.' This model specifically has three core orientations: 'experience', 'meeting God', and 'immersion'. In other words, children's spiritual education pursues 'experience rather than knowledge', pursues the experience of meeting God in the second person rather than teaching third-person knowledge about God, and values the spiritual moment of immersion more than anything else. Second, it searches for specific ways and methods through which those three core goals could be implemented, and found that they were 'sense,' 'liturgy,' and 'story.' The sense becomes a path that evokes experience, the liturgy becomes a place for 'meeting God,' and 'story' becomes a key path to 'immersion.' And when the three are organically combined with each other, the goals pursued by children's spiritual education can be holistically converged. Conclusions and Suggestions: Through these considerations, it found that the core values and direction of education are consistently maintained in children's spiritual education, from children's understanding to education methods. It also figured out that the direction should be shared not only by children's spiritual education but also by all who pursue holistic faith education: 'what to experience' rather than 'what to teach', 'liturgy' rather than 'teaching', 'story' rather than 'explanation', and 'sensory' experiences rather than 'abstract' knowledge.

• Journal of Korea Port Economic Association
• /
• 제40권2호
• /
• pp.65-78
• /
• 2024

This study investigates the correlation between financial constraints and investment activities in Korean logistics firms. A sample of 340 companies engaged in the transportation sector, as per the 2021 KSIC, was selected for analysis. Financial data obtained from the DART were used to compile a panel dataset spanning from 1996 to 2021, totaling 6,155 observations. The research model was validated, and tests for heteroscedasticity and autocorrelation in the error terms were conducted considering the panel data structure. The relationship between investment activities in the previous period and current investment activities was analyzed using panel Generalized Method of Moments(GMM). The validation results of the research indicate that Korean logistics firms tend to increase investment activities as their level of financial constraints improves. Specifically, a positive relationship between the level of financial constraints and investment activities was consistently observed across all models. These findings suggest that investment decision-making varies based on the financial constraints faced by companies, aligning with previous research indicating that investment activities of constrained firms are subdued. Moreover, while the results from the model examining whether investment activities in the previous period affect current investment activities indicated an influence of investment activities from the previous period on current investment activities, the investment activities from two periods ago did not show a significant relationship with current investment activities. Among the control variables, firm size and cash flow variables exhibited positive relationships, while debt size and asset diversification variables showed negative relationships. Thus, larger firm size and smoother cash flows were associated with more proactive investment activities, while high debt levels and extensive asset diversification appeared to constrain investment activities in logistics companies. These results interpret that under financial constraints, internal funding sources such as cash flows exhibit positive relationships, whereas external capital sources such as debt demonstrate negative relationships, consistent with empirical findings from previous research.

• Journal of Korean Society of Forest Science
• /
• 제83권2호
• /
• pp.175-190
• /
• 1994

In order to get fundamental information for prediction of landslide hazard, both forest and site factors affecting slope stability were investigated in many areas of active landslides. Twelve descriptors were identified and quantified to develop the prediction model by multivariate statistical analysis. The main results obtained could be summarized as follows : The main factors influencing a large scale of landslide were shown in order of precipitation, age group of forest trees, altitude, soil texture, slope gradient, position of slope, vegetation, stream order, vertical slope, bed rock, soil depth and aspect. According to partial correlation coefficient, it was shown in order of age group of forest trees, precipitation, soil texture, bed rock, slope gradient, position of slope, altitude, vertical slope, stream order, vegetation, soil depth and aspect. The main factors influencing a landslide occurrence were shown in order of age group of forest trees, altitude, soil texture, slope gradient, precipitation, vertical slope, stream order, bed rock and soil depth. Two prediction models were developed by magnitude and frequency of landslide. Particularly, a prediction method by magnitude of landslide was changed the score for the convenience of use. If the total store of the various factors mark over 9.1636, it is evaluated as a very dangerous area. The mean score of landslide and non-landslide group was 0.1977 and -0.1977, and variance was 0.1100 and 0.1250, respectively. The boundary value between the two groups related to slope stability was -0.02, and its predicted rate of discrimination was 73%. In the score range of the degree of landslide hazard based on the boundary value of discrimination, class A was 0.3132 over, class B was 0.3132 to -0.1050, class C was -0.1050 to -0.4196, class D was -0.4195 below. The rank of landslide hazard could be divided into classes A, B, C and D by the boundary value. In the number of slope, class A was 68, class B was 115, class C was 65, and class D was 52. The rate of landslide occurrence in class A and class B was shown at the hige prediction of 83%. Therefore, dangerous areas selected by the prediction method of landslide could be mapped for land-use planning and criterion of disaster district. And also, it could be applied to an administration index for disaster prevention.

• Asia pacific journal of information systems
• /
• 제23권3호
• /
• pp.25-53
• /
• 2013

This study analyzes the effect of Computer Aided Innovation (CAI) to improve R&D Capabilities empirically. Survey was distributed by e-mail and Google Docs, targeting CTO of 235 SMEs. 142 surveys were returned back (rate of return 60.4%) from companies. Survey results from 119 companies (83.8%) which are effective samples except no-response, insincere response, estimated value, etc. were used for statistics analysis. Companies with less than 50billion KRW sales of entire researched companies occupy 76.5% in terms of sample traits. Companies with less than 300 employees occupy 83.2%. In terms of the type of company business Partners (called 'partners with big companies' hereunder) who work with big companies for business occupy 68.1%. SMEs based on their own business (called 'independent small companies') appear to occupy 31.9%. The present status of holding IT system according to traits of company business was classified into partners with big companies versus independent SMEs. The present status of ERP is 18.5% to 34.5%. QMS is 11.8% to 9.2%. And PLM (Product Life-cycle Management) is 6.7% to 2.5%. The holding of 3D CAD is 47.1% to 21%. IT system-holding and its application of independent SMEs seemed very vulnerable, compared with partner companies of big companies. This study is comprised of IT infra and IT Utilization as CAI capacity factors which are independent variables. factors of R&D capabilities which are independent variables are organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability. The highest average value of variables was 4.24 in organization capability 2. The lowest average value was 3.01 in IT infra which makes users access to data and information in other areas and use them with ease when required during new product development. It seems that the inferior environment of IT infra of general SMEs is reflected in CAI itself. In order to review the validity used to measure variables, Factors have been analyzed. 7 factors which have over 1.0 pure value of their dependent and independent variables were extracted. These factors appear to explain 71.167% in total of total variances. From the result of factor analysis about measurable variables in this study, reliability of each item was checked by Cronbach's Alpha coefficient. All measurable factors at least over 0.611 seemed to acquire reliability. Next, correlation has been done to explain certain phenomenon by correlation analysis between variables. As R&D capabilities factors which are arranged as dependent variables, organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability turned out that they acquire significant correlation at 99% reliability level in all variables of IT infra and IT Utilization which are independent variables. In addition, correlation coefficient between each factor is less than 0.8, which proves that the validity of this study judgement has been acquired. The pair with the highest coefficient had 0.628 for IT utilization and technology-accumulating capability. Regression model which can estimate independent variables was used in this study under the hypothesis that there is linear relation between independent variables and dependent variables so as to identify CAI capability's impact factors on R&D. The total explanations of IT infra among CAI capability for independent variables such as organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability are 10.3%, 7%, 11.9%, 30.9%, and 10.5% respectively. IT Utilization exposes comprehensively low explanatory capability with 12.4%, 5.9%, 11.1%, 38.9%, and 13.4% for organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability respectively. However, both factors of independent variables expose very high explanatory capability relatively for technology-accumulating capability among independent variable. Regression formula which is comprised of independent variables and dependent variables are all significant (P<0.005). The suitability of regression model seems high. When the results of test for dependent variables and independent variables are estimated, the hypothesis of 10 different factors appeared all significant in regression analysis model coefficient (P<0.01) which is estimated to affect in the hypothesis. As a result of liner regression analysis between two independent variables drawn by influence factor analysis for R&D capability and R&D capability. IT infra and IT Utilization which are CAI capability factors has positive correlation to organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability with inside and outside which are dependent variables, R&D capability factors. It was identified as a significant factor which affects R&D capability. However, considering adjustable variables, a big gap is found, compared to entire company. First of all, in case of partner companies with big companies, in IT infra as CAI capability, organization capability, process capability, human resources capability, and technology capability out of R&D capacities seems to have positive correlation. However, collaboration capability appeared insignificance. IT utilization which is a CAI capability factor seemed to have positive relation to organization capability, process capability, human resources capability, and internal/external collaboration capability just as those of entire companies. Next, by analyzing independent types of SMEs as an adjustable variable, very different results were found from those of entire companies or partner companies with big companies. First of all, all factors in IT infra except technology-accumulating capability were rejected. IT utilization was rejected except technology-accumulating capability and collaboration capability. Comprehending the above adjustable variables, the following results were drawn in this study. First, in case of big companies or partner companies with big companies, IT infra and IT utilization affect improving R&D Capabilities positively. It was because most of big companies encourage innovation by using IT utilization and IT infra building over certain level to their partner companies. Second, in all companies, IT infra and IT utilization as CAI capability affect improving technology-accumulating capability positively at least as R&D capability factor. The most of factor explanation is low at around 10%. However, technology-accumulating capability is rather high around 25.6% to 38.4%. It was found that CAI capability contributes to technology-accumulating capability highly. Companies shouldn't consider IT infra and IT utilization as a simple product developing tool in R&D section. However, they have to consider to use them as a management innovating strategy tool which proceeds entire-company management innovation centered in new product development. Not only the improvement of technology-accumulating capability in department of R&D. Centered in new product development, it has to be used as original management innovative strategy which proceeds entire company management innovation. It suggests that it can be a method to improve technology-accumulating capability in R&D section and Dynamic capability to acquire sustainable competitive advantage.

• Journal of Korean Academy of Nursing Administration
• /
• 제6권1호
• /
• pp.135-146
• /
• 2000

The purpose of this study was to develope, based on the Nursing Intervention Classification (NIC) system. a set of standardized nursing interventions which had been validated. and their associated activities. for use with nursing diagnoses related to home health care for women who have had a caesarian delivery and for their newborn babies. This descriptive study for instrument development had three phases: first. selection of nursing diagnoses. second, validation of the preliminary home health care interventions. and third, application of the home care interventions. In the first phases, diagnoses from 30 nursing records of clients of the home health care agency at P. medical center who were seen between April 21 and July 30. 1998. and from 5 textbooks were examined. Ten nursing diagnoses were selected through a comparison with the NANDA (North American Nursing Diagnosis Association) classification In the second phase. using the selected diagnoses. the nursing interventions were defined from the diagnoses-intervention linkage lists along with associated activities for each intervention list in NIC. To develope the preliminary interventions five-rounds of expertise tests were done. During the first four rounds. 5 experts in clinical nursing participated. and for the final content validity test of the preliminary interventions. 13 experts participated using the Fehring's Delphi technique. The expert group evaluated and defined the set of preliminary nursing interventions. In the third phases, clinical tests were held at in a home health care setting with two home health care nurses using the preliminary intervention list as a questionnaire. Thirty clients referred to the home health care agency at P. medical center between October 1998 and March 1999 were the subjects for this phase. Each of the activities were tested using dichotomous question method. The results of the study are as follows: 1. For the ten nursing diagnoses. 63 appropriate interventions were selected from 369 diagnoses interventions links in NlC., and from 1.465 associated nursing activities. From the 63 interventions. the nurses expert group developed 18 interventions and 258 activities as the preliminary intervention list through a five-round validity test 2. For the fifth content validity test using Fehring's model for determining lCV (Intervention Content Validity), a five point Likert scale was used with values converted to weights as follows: 1=0.0. 2=0.25. 3=0.50. 4=0.75. 5=1.0. Activities of less than O.50 were to be deleted. The range of ICV scores for the nursing diagnoses was 0.95-0.66. for the nursing interventions. 0.98-0.77 and for the nursing activities, 0.95-0.85. By Fehring's method. all of these were included in the preliminary intervention list. 3. Using a questionnaire format for the preliminary intervention list. clinical application tests were done. To define nursing diagnoses. home health care nurses applied each nursing diagnoses to every client. and it was found that 13 were most frequently used of 400 times diagnoses were used. Therefore. 13 nursing diagnoses were defined as validated nursing diagnoses. Ten were the same as from the nursing records and textbooks and three were new from the clinical application. The final list included 'Anxiety', 'Aspiration. risk for'. 'Infant behavior, potential for enhanced, organized'. 'Infant feeding pattern. ineffective'. 'Infection'. 'Knowledge deficit'. 'Nutrition, less than body requirements. altered', 'Pain'. 'Parenting'. 'Skin integrity. risk for. impared' and 'Risk for activity intolerance'. 'Self-esteem disturbance', 'Sleep pattern disturbance' 4. In all. there were 19 interventions. 18 preliminary nursing interventions and one more intervention added from the clinical setting. 'Body image enhancement'. For 265 associated nursing activities. clinical application tests were also done. The intervention rate of 19 interventions was from 81.6% to 100%, so all 19 interventions were in c1uded in the validated intervention set. From the 265 nursing activities. 261(98.5%) were accepted and four activities were deleted. those with an implimentation rate of less than 50%. 5. In conclusion. 13 diagnoses. 19 interventions and 261 activities were validated for the final validated nursing intervention set.

• The Journal of Korean Society for Radiation Therapy
• /
• 제26권2호
• /
• pp.337-343
• /
• 2014

Purpose : The aim of this study is to evaluate unwanted scattered dose to ovary by scattering and leakage generated from treatment fields of Tomotherapy for childbearing woman with breast cancer. Materials and Methods : The radiation treatments plans for left breast cancer were established using Tomotherapy planning system (Tomotherapy, Inc, USA). They were generated by using helical and direct Tomotherapy methods for comparison. The CT images for the planning were scanned with 2.5 mm slice thickness using anthropomorphic phantom (Alderson-Rando phantom, The Phantom Laboratory, USA). The measurement points for the ovary dose were determined at the points laterally 30 cm apart from mid-point of treatment field of the pelvis. The measurements were repeated five times and averaged using glass dosimeters (1.5 mm diameter and 12 mm of length) equipped with low-energy correction filter. The measures dose values were also converted to Organ Equivalent Dose (OED) by the linear exponential dose-response model. Results : Scattered doses of ovary which were measured based on two methods of Tomo helical and Tomo direct showed average of $64.94{\pm}0.84mGy$ and $37.64{\pm}1.20mGy$ in left ovary part and average of $64.38{\pm}1.85mGy$ and $32.96{\pm}1.11mGy$ in right ovary part. This showed when executing Tomotherapy, measured scattered dose of Tomo Helical method which has relatively greater monitor units (MUs) and longer irradiation time are approximately 1.8 times higher than Tomo direct method. Conclusion : Scattered dose of left and right ovary of childbearing women is lower than ICRP recommended does which is not seriously worried level against the infertility and secondary cancer occurrence. However, as breast cancer occurrence ages become younger in the future and radiation therapy using high-precision image guidance equipment like Tomotherapy is developed, clinical follow-up studies about the ovary dose of childbearing women patients would be more required.

• Korea Journal of Hospital Management
• /
• 제9권1호
• /
• pp.66-94
• /
• 2004

The objective of this study is to examine how to maximize the efficiency of hospital management by minimizing the unit cost of hospital operation. For this purpose, this paper proposes to develop a model of the profit maximization based on the cost minimization dictum using the statistical tools of arriving at the maximum likelihood values. The preliminary survey data are collected from the annual statistics and their analyses published by Korea Health Industry Development Institute and Korean Hospital Association. The maximum likelihood value statistical analyses are conducted from the information on the cost (function) of each of 36 hospitals selected by the random stratified sampling method according to the size and location (urban or rural) of hospitals. We believe that, although the size of sample is relatively small, because of the sampling method used and the high response rate, the power of estimation of the results of the statistical analyses of the sample hospitals is acceptable. The conceptual framework of analyses is adopted from the various models of the determinants of hospital costs used by the previous studies. According to this framework, the study postulates that the unit cost of hospital operation is determined by the size, scope of service, technology (production function) as measured by capacity utilization, labor capital ratio and labor input-mix variables, and by exogeneous variables. The variables to represent the above cost determinants are selected by using the step-wise regression so that only the statistically significant variables may be utilized in analyzing how these variables impact on the hospital unit cost. The results of the analyses show that the models of hospital cost determinants adopted are well chosen. The various models analyzed have the (goodness of fit) overall determination (R2) which all turned out to be significant, regardless of the variables put in to represent the cost determinants. Specifically, the size and scope of service, no matter how it is measured, i. e., number of admissions per bed, number of ambulatory visits per bed, adjusted inpatient days and adjusted outpatients, have overall effects of reducing the hospital unit costs as measured by the cost per admission, per inpatient day, or office visit implying the existence of the economy of scale in the hospital operation. Thirdly, the technology used in operating a hospital has turned out to have its ramifications on the hospital unit cost similar to those postulated in the static theory of the firm. For example, the capacity utilization as represented by the inpatient days per employee tuned out to have statistically significant negative impacts on the unit cost of hospital operation, while payroll expenses per inpatient cost has a positive effect. The input-mix of hospital operation, as represented by the ratio of the number of doctor, nurse or medical staff per general employee, supports the known thesis that the specialized manpower costs more than the general employees. The labor/capital ratio as represented by the employees per 100 beds is shown to have a positive effect on the cost as expected. As for the exogeneous variable's impacts on the cost, when this variable is represented by the percent of urban 100 population at the location where the hospital is located, the regression analysis shows that the hospitals located in the urban area have a higher cost than those in the rural area. Finally, the case study of the sample hospitals offers a specific information to hospital administrators about how they share in terms of the cost they are incurring in comparison to other hospitals. For example, if his/her hospital is of small size and located in a city, he/she can compare the various costs of his/her hospital operation with those of other similar hospitals. Therefore, he/she may be able to find the reasons why the cost of his/her hospital operation has a higher or lower cost than other similar hospitals in what factors of the hospital cost determinants.