• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.65-71
• /
• 2001

The development process of the polishing system for the aspherical lens mold for opto-electronics industry is described. The system uses the method that polishing tool is scanned on the surface under PC-NC control for the aspherical lens mold. The two axes interpolation of the minimum translation mechanism is applied to give uniform working condition by motion analysis. An aspherical surface is divided into multiple sections and each dwell time is calculated from the polishing rate model based on the Preston equation. As result of form error compensation experiment, initial form error is decreased about 25% while an average value of surface roughness is also reduced successfully from 180nm to 19nm.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.4
• /
• pp.87-94
• /
• 1994

The aim of the work descrihed in this paper is to study a characteristics of an unsaturated soil for the different matric suctions. To this end, a series of suction controlled isotropic and triaxial compression tests is conducted on silty sands. Matric suction is controlled by the axis translation technique using high air entry ceramic disk. Total volume change, air and water volume changes are measured by the device made for the experiment. The specimens are compacted using a half of Proctor compaction energy and with the water contents of 5% drier than the optimum moisture contents. Isotropic compression and triaxial compression tests are conducted on the specimen at each equilibrium state of matric suction. From test results, volume changes and deviator stresses are analyzed at each state and their relationships are formulated.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.587-599
• /
• 1995

This paper proposes a method for pattern recognition using spectral analysis and a hybrid genetic-neural-fuzzy networks. The feature vectors using spectral analysis on contour sequences of 2-D images are extracted, and the vectors are not effected by translation, rotation and scale variance. A combined model using the advantages of conventional method is proposed, those are supervised learning BP, global searching genetic algorithm, and unsupervised learning fuzzy c-method. The proposed method is applied to 10 aircraft recognition to confirm the performance of the method. The experimental results show that the proposed method is better accuracy than conventional method using BP or fuzzy c-method, and learning speed is enhanced.

• Language and Information
• /
• v.5 no.2
• /
• pp.21-37
• /
• 2001

Pustejovsky (1995) rekindled debate on the dual problems of how to represent lexical meaning and on the information that is to be encoded in a lexicon. For natural language processing such as machine translation, these are important issues. When a lexical-conceptual mismatch occurs in translation of corresponding words from two different languages, the appropriate representation of their meanings is very important. This paper proposes a new formalism for representing lexical entries by first analysing observable mismatches in comparable pairs of nouns, verbs, and adjectives in English and Korean. Inherent mis-interpretations and mis-readings in each pair are identified. Then, concept theories such as those presented by Ganter and Wille (1996) and Priss (1998) are extended in order to reflect the cognitivist view that meaning resides in concept, and also to incorporate the propositions of the so-called ‘multiple inheritance’system. An alternative to the formalism of Pustejovsky (1995) and Pollard & Sag (1994) is then proposed. Finally, representative examples of lexical mismatches are analysed using the new model.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.15-18
• /
• 2000

In this study, we improve the performance of a speech recognition system of visual information depending on lip movements. This paper focuses on the robustness of the word recognition system with the rotation, transition and scaling of the lip images. The different methods of lipreading have been used to estimate the stability of recognition performance. Especially, we work out the special system of the log-polar mapping, which is called Mellin transform with quasi RTS-invariant and related approaches to machine vision. The results of word recognition are reported with HMM (Hidden Markov Model) recognition system.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.9
• /
• pp.39-47
• /
• 2013

Local deformations in back filling materials of two sands and one glass bead with different particle shapes behind a rigid retaining wall were studied. Two kinds of boundary conditions were compared: active wall translation and active rotation of the wall about its toe. Effect of the speed of active wall translation was also investigated. The digital image correlation method was used to analyze local deformation developments inside the materials. Test results showed that particle shape and density mainly influence the inclination angle and width of the shear band. The general shear band pattern is strongly dependent on the wall movement mode, while it was little influenced by particle shape. Within a limited range of wall speed in this study, shear band became wider and local deformation became larger with increase of wall speed.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2005.09a
• /
• pp.421-426
• /
• 2005

In this paper, we investigate the nonlinear dynamic behavior of TPP (thiamine pyrophosphate) riboswitches in E. coli (Escherichia coli). TPP riboswitches are highly conserved RNA regulatory elements, embedded within the 5’'untranslated region of three TPP biosynthesis operons. The three operons thiCEFSGH, thiMD, and thiBPQ are involved in the biosynthesis, salvage, and transport of TPP, respectively. TPP riboswitches modulate their expressions in response to changing TPP concentration, without involving protein cofactors. Interestingly, the expression of thiMD is regulated at the translational level, while that of thiCEFSGH at both levels of transcription and translation. We develop a mathematical model of the TPP riboswitch’s regulatory system possessed by thiCEFSGH and thiMD, so as to simulate the time-course experiments of TPP biosynthesis in E. coli. The simulation results are validated against three sets of reported experimental data in order to gain insight into the nature of steady states and the stability of TPP riboswitches, and to explain the biological significance of regulating at level of transcription or translation, or even both. Our findings suggest that in the TPP biosynthesis pathway of E. coli, the biological effect of down-regulating thiCEFSGH operon at the translational level by TPP riboswitch is less prominent than that at the transcriptional level.

• Journal of Korean Library and Information Science Society
• /
• v.46 no.2
• /
• pp.317-336
• /
• 2015

This paper provides a brief overview of bibliographic relationships, a analysis of bibliographic relationships' characteristics of 2,940 bibliographic records on the Five Classics and Four Books taken from Korean National Bibliography, and a methodology for applying the FRBR model based on analysis of the samples. As results of analysis, the work type ranked high particularly in the commentary, translation with notes, and translation on the original works etc. I suggested adopting conception of supper works, that is, family of works and using uniform title as a connective device between the works, that is, an authorized access point of RDA to apply FRBR model of the Five Classics and Four Books. Also I exemplified the description of uniform title in 630 field as subject added entry.

• Wind and Structures
• /
• v.31 no.3
• /
• pp.217-227
• /
• 2020

Based on translation models, both Gaussian and non-Gaussian wind fields are generated using spectral representation method for investigating the influence of non-Gaussian characteristics and directivity effect of wind load on fatigue damage of wind turbine. Using the blade aerodynamic model and multi-body dynamics, dynamic responses are calculated. Using linear damage accumulation theory and linear crack propagation theory, crack initiation life and crack propagation life are discussed with consideration of the joint probability density distribution of the wind direction and mean wind speed in detail. The result shows that non-Gaussian characteristics of wind load have less influence on fatigue life of wind turbine in the area with smaller annual mean wind speeds. Whereas, the influence becomes significant with the increase of the annual mean wind speed. When the annual mean wind speeds are 7 m/s and 9 m/s at hub height of 90 m, the crack initiation lives under softening non-Gaussian wind decrease by 10% compared with Gaussian wind fields or at higher hub height. The study indicates that the consideration of the influence of softening non-Gaussian characteristics of wind inflows can significantly decrease the fatigue life, and, if neglected, it can result in non-conservative fatigue life estimates for the areas with higher annual mean wind speeds.

• Journal of International Society for Simulation Surgery
• /
• v.2 no.1
• /
• pp.17-25
• /
• 2015

Purpose In this paper, we propose a robust 3D vessel tracking algorithm by utilizing an active contour model and unscented Kalman filter which are the two representative algorithms on segmentation and tracking. Materials and Methods The proposed algorithm firstly accepts user input to produce an initial estimate of vessel boundary segmentation. On each Computed Tomography Angiography (CTA) slice, the active contour is applied to segment the vessel boundary. After that, the estimation process of the unscented Kalman filter is applied to track the vessel boundary of the current slice to estimate the inter-slice vessel position translation and shape deformation. Finally both active contour and unscented Kalman filter are inter-operated for vessel segmentation of the next slice. Results The arbitrarily shaped blood vessel boundary on each slice is segmented by using the active contour model, and the Kalman filter is employed to track the translation and shape deformation between CTA slices. The proposed algorithm is applied to the 3D visualization of chest CTA images using graphics hardware. Conclusion Through this algorithm, more opportunities, giving quick and brief diagnosis, could be provided for the radiologist before detailed diagnosis using 2D CTA slices, Also, for the surgeon, the algorithm could be used for surgical planning, simulation, navigation and rehearsal, and is expected to be applied to highly valuable applications for more accurate 3D vessel tracking and rendering.