• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.283-296
• /
• 2008

The numerical simulations for groundwater flow were carried out to support the input parameters for safety assessment in LILW repository site. As the input parameters for safety assessment, the groundwater flux into the underground facilities during construction, flow rate through the disposal silo after closure of disposal silo and flow pathway from the disposal silo to discharge area were analyzed using the 10 cases groundwater flow simulations. From the total 10 numerical simulation results, the statistics of estimated output were similar to among 10 cases. In some cases, the analyzed input parameters were strongly governed by locally existed high permeable fracture zone at radioactive waste disposed depth. Indeed, numerical simulation for well scenario as a human intrusion scenario was carried out using the hydraulically severe case model. Using the results of well scenario, the input parameters for safety assessment were also obtained through the numerical simulation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.6
• /
• pp.509-523
• /
• 2023

The high-level nuclear waste (HLW) repository is exposed to complex environmental conditions consisting of high temperature, high humidity, and radiation, resulting in structural deterioration. Therefore, structural health monitoring is essential, and piezo sensors are used to detect cracks and estimate strength. However, since the monitoring sensors installed in the disposal tunnel and disposal container cannot be replaced or removed, the quantitative life of the monitoring sensor and its suitability must be assessed. In this study, the life of a piezo sensor for monitoring was assessed using an accelerated life test (ALT). The failure mode and mechanism of the piezo sensor under high temperature conditions were determined, and temperature stress's influence on the piezo sensor's life was analyzed. ALT was conducted on temperature stress and the relationship between temperature stress and piezo sensor life was suggested. The life of the piezo sensor was assessed using the Weibull probability distribution and the Arrhenius acceleration model. The suggested relationship can be used in multiple stress ALT designs for more precise life assessment.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.5
• /
• pp.528-535
• /
• 2000

This paper aims at providing guidelines enabling productive software construction by offering reusable modules which is used not only for effective maintenance for each step, but also for a re-engineering process after analyzing developed source code. There are four processing steps. The first is to analyze source code. The second is module slicing and clustering using McCabe and BP/Win Tools, The third is to transform the outputs extracted from the business model to reusable modules. The final step is to design repository and to construct a system. In this paper, we applied the fourth step to our case study, which was specified from the first step to the fourth. The specified fourth step contains various things for constructing repository. And the fourth step reanalyzes informal and unstructured information by using reverse engineering tools, in order to provide effective guidelines for productive software maintenance and re-engineering.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.1-13
• /
• 2016

Groundwater flow paths and groundwater ages at a radioactive waste repository located in a coastal area of South Korea were evaluated using the hydrochemical and hydrogeological characteristics of groundwater, surface water, rain water, and seawater, as well as by numerical modeling. The average groundwater travel time in the top layer of the model, evaluated by numerical modeling and groundwater age (34 years), approximately corresponds to the groundwater age obtained by chlorofluorocarbon (CFC)-12 analysis (26-34 years). The data suggest that the groundwater in wells in the study area originated up-gradient at distances of 140-230 m. Results of CFC analyses, along with seasonal variations in the δ¹⁸O and δD values of groundwater and the relationships between ²²²Rn concentrations and δ¹⁸O values and between ²²²Rn concentrations and δD values, indicate that groundwater recharge occurs in the summer rainy season and discharge occurs in the winter dry season. Additionally, a linear relationship between dissolved SiO₂ concentrations and groundwater ages indicates that natural mineralization is affected by the dilution of groundwater recharge in the rainy summer season.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.1054-1066
• /
• 2006

This study proposes a new paradigm hospital information system through the nursing classification system and design of the HL7 clinical document architecture (Health Level Seven CDA) for information-sharing among various healthcare institutions. Nursing information CDA are included coding systems of nursing diagnosis, nursing intervention, nursing activity and outcomes. And, we have developed CDA generator for active generation of XML document. This study aims to facilitate the optimum care by providing health information required for individuals to nursing specialists in real-time, to help improvements in health, to improve the quality of productive life. This study has the following significance. First, an expansion and redefining process conducted, founded on the HL7 clinical document architecture and reference information model, to apply international standards to Korean contexts. Second, we propose a next-generation web based hospital information system that is based on the clinical document architecture. In conclusion, the study of the clinical document architecture will include an electronic health record (EHR) and a clinical data repository (CDR), and also make possible healthcare information-sharing among various healthcare institutions.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.3
• /
• pp.213-229
• /
• 2005

Nuclides in radioactive wastes are assumed to be transported in the geosphere by groundwater and probably discharged into the biosphere. Quantitative evaluation of doses to human beings due to nuclide transport in the geosphere and through the various pathways in the biosphere is the final step of safety assessment of the radioactive waste repository. To calculate the flux to dose conversion factors (DCFs) for nuclides appearing at GBIs with their decay chains, a template ACBIO which is an AMBER case file based on mathematical model for the mass transfer coefficients between the compartments has been developed considering material balance among the compartments in biosphere and then implementing to AMBER, a general and flexible software tool that allows to build dynamic compartment models. An illustrative calculation with ACBIO is shown.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.2
• /
• pp.197-207
• /
• 2006

The engineering performance of a high level waste repository is significantly dependent upon the T-H-M behavior in the engineered barrier system. An engineering-scale test facility (KENTEX) was set up to validate the T-H-M behaviors in the buffer of a reference disposal system developed in the 2002. The validation tests started on May 31, 2005 and is now in progress. The KENTEX facility and validation test programme are introduced, and pre-operation calculations are also presented to give information on the sensitive location of sensors and operational conditions. This test will provide information (e.g., large-scale apparatus, sensors, monitoring system etc.) needed for 'in-situ' tests, make the validation of a T-H-M model for the T-H-M performance assessment of the reference disposal system, and demonstrate the engineering feasibility of fabricating and emplacing the buffer of a repository.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.3
• /
• pp.227-240
• /
• 2003

When we develop and use the java-based distributed object system, the system developer must deploy distributed object, which is implemented to predefined interface, to network and the system user acquires reference about distributed object and changes reference to interface type. Sharing of interface is essential for these works In this paper, we propose the IRSJ(interface repository service based on jim) to improve efficiency of interface sharing at the JINI system development. the IRSJ is consisted of the java classes for JINI system and interface sharing service. If development teams perform collaborative work in short distance, the IRSJ can search interface file without information of lookup server or interface writer If development teams perform collaborative work in long distance, the IRJS can search interface with only an address of server that executes lookup service. Although the interface object not requires additional search, the interface object that failed search interface can download interface and use interface using remote event model. When the message service fails in interface search, the message service sends interface request message to a development team member who use the IRSJ automatically, so that interface sharing may be possible in short time.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.1
• /
• pp.149-156
• /
• 2014

NGE(Nested Generalized Exemplar Method) can increase the performance of the noisy data at the same time, can reduce the size of the model. It is the optimal distance-based classification method using a matching rule. NGE cross or overlap hyperrectangles generated in the learning has been noted to inhibit the factors. In this paper, We propose the DHGen(Dominant Hyperrectangle Generation) algorithm which avoids the overlapping and the crossing between hyperrectangles, uses interval weights for mixed hyperrectangles to be splited based on the mutual information. The DHGen improves the classification performance and reduces the number of hyperrectangles by processing the training set in an incremental manner. The proposed DHGen has been successfully shown to exhibit comparable classification performance to k-NN and better result than EACH system which implements the NGE theory using benchmark data sets from UCI Machine Learning Repository.

• Journal of Soil and Groundwater Environment
• /
• v.26 no.5
• /
• pp.29-38
• /
• 2021

This study investigated the mineralogical properties of bentonite and illite and evaluated the Cs sorption at various concentrations (C_w≈1-10⁵ ㎍/L). Bentonite samples, collected from South Korea and USA, majorly consisted of Ca- and Na-montmorillonite, showed large cation exchange capacity (CEC, 91.4 and 47.3 meq/100 g) and specific surface area (SSA, 46.1 and 39.7 m²/g). In contrast, illite sample (USA) had relatively low values for 14.4 meq/100g of CEC and 29.3 m²/g of SSA, respectively. Bentonite and illite had different non-linear sorption for Cs along with C_w. At low C_w<10 ㎍/L, illite showed higher sorption capacity than bentonite despite low CEC because of the existence of specific sorption sites at the weathered mineral edge. However, as C_w increased, bentonite represented high sorption capacity because the cation exchange between Cs and interlayer cations was effective at high C_w conditions. These results implicated that the Cs concentration is important to evaluate the sorption performance of bentonite and illite. Finally, the Cuadros' kinetic model for illitization using various K concentrations (2×10^-5 and 1.7×10^-3 mol/L) and temperature (100-200℃) showed that up to 50% of the montmorillonite in bentonite could be converted to illite, suggesting that the illitization should be considered to evaluate the sorption performance of the bentonite in deep geological disposal repository.