• 제목/요약/키워드: Model Parameter

검색결과 7,250건 처리시간 0.033초

창업기업 QFD 교육 훈련 프로그램의 학습 전이의도에 관한 연구 (Impact Factors of KS-QFD Training Participants of 3 years over Startups on Transfer Intension)

  • 황보윤;양영석;김명숙
    • 벤처창업연구
    • /
    • 제12권6호
    • /
    • pp.1-12
    • /
    • 2017
  • 본 연구는 창업기업을 대상으로 QFD(Quality Function Deployment) 교육 훈련 프로그램의 훈련 성과에 관하여 연구하였다. 창업기업은 3년 이상의 기업을 대상으로 하여 QFD 교육 훈련 프로그램을 통해 창업기업들의 훈련 참가자들이 학습 전이 의도 즉 학습후 적용하고자하는 동기 부여 효과에 대해 연구하고자 하였다. 본 프로그램의 의도는 3년 이상 창업 기업들이 본 훈련 과정을 통해 현재의 매출액을 5배 이상의 성과를 달성할 수 있도록 훈련하고자 하였다. 이를 통해 기업들에게 실질적으로 사업성과에 도움이 되는 교육 훈련 프로그램을 기획 및 보급하는 것을 목적으로 하였다. 본 연구를 위해 독립변수로는 학습자 준비상태, 훈련내용 타당성인지로 하였고, 매개변수로 학습자의 자기효능감, 종속변수로는 학습 전이의도를 설정하였다. 실증분석 결과 학습자 준비상태는 학습 전이 의도에 직접적으로는 영향을 미치지 않는 것으로 통계적으로 유의하게 나타났으나, 자기효능감을 매개변수로 하여 완전한 매개 효과가 발생하는 것으로 나타났다. 훈련내용 타당성 인지는 학습 전이 의도에 직접효과와 함께 자기효능감을 매개변수로 부분 매개 효과가 발생하는 것으로 검증되었다. 본 연구의 시사점은 현실에 접목하기 쉽게 실천중심으로 설계된 훈련 프로그램은 학습자의 준비 상태에 관계없이 학습자에게 자기효능감을 높이고 이를 통해 학습 전이 의도를 높이는 것으로 나타났다. 아울러 본 연구의 실험 대상 프로그램이 KS-QFD 프로그램이 창업기업들에게 매우 실용적이고도 도움이 되는 프로그램임을 입증한다고 볼 수 있다.

  • PDF

Cable vibration control with internal and external dampers: Theoretical analysis and field test validation

  • Di, Fangdian;Sun, Limin;Chen, Lin
    • Smart Structures and Systems
    • /
    • 제26권5호
    • /
    • pp.575-589
    • /
    • 2020
  • For vibration control of stay cables in cable-stayed bridges, viscous dampers are frequently used, and they are regularly installed between the cable and the bridge deck. In practice, neoprene rubber bushings (or of other types) are also widely installed inside the cable guide pipe, mainly for reducing the bending stresses of the cable near its anchorages. Therefore, it is important to understand the effect of the bushings on the performance of the external damper. Besides, for long cables, external dampers installed at a single position near a cable end can no longer provide enough damping due to the sag effect and the limited installation distance. It is thus of interest to improve cable damping by additionally installing dampers inside the guide pipe. This paper hence studies the combined effects of an external damper and an internal damper (which can also model the bushings) on a stay cable. The internal damper is assumed to be a High Damping Rubber (HDR) damper, and the external damper is considered to be a viscous damper with intrinsic stiffness, and the cable sag is also considered. Both the cases when the two dampers are installed close to one cable end and respectively close to the two cable ends are studied. Asymptotic design formulas are derived for both cases considering that the dampers are close to the cable ends. It is shown that when the two dampers are placed close to different cable ends, their combined damping effects are approximately the sum of their separate contributions, regardless of small cable sag and damper intrinsic stiffness. When the two dampers are installed close to the same end, maximum damping that can be achieved by the external damper is generally degraded, regardless of properties of the HDR damper. Field tests on an existing cable-stayed bridge have further validated the influence of the internal damper on the performance of the external damper. The results suggest that the HDR is optimally placed in the guide pipe of the cable-pylon anchorage when installing viscous dampers at one position is insufficient. When an HDR damper or the bushing has to be installed near the external damper, their combined damping effects need to be evaluated using the presented methods.

1982년 하계 서해안 조석전선의 구조 (The Structure of Tidal Front in the Earstern Yellow Sea in the Summer of 1982)

  • 추효상;조규대
    • 한국수산과학회지
    • /
    • 제17권2호
    • /
    • pp.83-91
    • /
    • 1984
  • $1982{\sim}83$년과 $1966{\sim}70$년의 해양관측자료를 사용하여 하계 우리나라 서해 연안에서 형성되는 조석전선의 형성원인과 그 위치 및 구조를 조사하였다. 하계에 형성되는 전선은 조류에 의한 해저 난류로 연직혼합이 일어나는 곳과 외해와의 경계성이며, 그 위치는 수온, 염분, 용존산소의 수평경도와 수색 및 투명도로써 조사한 결과, G선($35^{\circ}31^'N$)과 S선($35^{\circ}25^'N$)의 연안에서 약 20mile 떨어진 해역이었다. 성층상태를 고려한 위치에너지는 V=10 $Joule/m^3$였으며, 수온, 염분, 용존산소와 수색 및 투명도로 조사한 전선의 위치는 이와 대체로 일치하였다. 따라서 이 역을 경계로 연안쪽은 물리, 화학적인 특성이 연직적으로 균일한 혼합층을 형성한다. 외해쪽에는 수면에서 약 $10{\sim}20m$까지 표면 혼합층, 약층, 그리고 저층 혼합층의 순으로 수괴의 구조가 형성되 어 있다. 동계에는 서해 전역이 표면냉각으로 인하여 전 해역에서 연직혼합이 일어나므로 하계의 구조와 같은 전선은 명확하게 형성되지 않는다.

  • PDF

터너증후군을 가진 성인 환자에서 대사증후군의 발생과 인슐린저항성과의 관계 (Development of metabolic syndrome and its correlation with insulin resistance in adult patients with Turner syndrome)

  • 김주화;강민재;신충호;양세원
    • Clinical and Experimental Pediatrics
    • /
    • 제52권3호
    • /
    • pp.370-375
    • /
    • 2009
  • 목 적 : 터너증후군 환자에서 대사증후군과 심혈관 질환의 위험성이 높다. 성인 연령의 터너증후군 환자들에서 대사증후군 관련요인을 분석하고, 인슐린 저항성의 대사위험성을 알아보기 위한 연구를 시행하였다. 방 법 : 43명의 성인 터너증후군 환자에서 대사증후군의 빈도와 관련 요인 값들을 분석하였다. HOMA-IR을 이용하여 인슐린 저항성군과 비저항성군으로 분류한 후 각 집단을 분석하고, HOMA- IR과 대사 증후군 관련요인의 상관관계를 알아보았다. 결 과 : 대사증후군은 터너증후군 환자의 7%에서 보였고 각 항목에 대해서 인슐린 저항성은 16.3%, 복부 비만이 15.4%, 고중성지방이 2.3%, 저HDL 콜레스테롤이 9.3%였고, 고혈압이 36.8 %였다. 체질량지수, 허리둘레, 공복 혈당, HOMA-IR, 수축기 혈압은 인슐린 저항성군에서 의미 있게 높게 나왔으며, HOMA-IR은 체질량지수, 허리둘레, 공복 혈당, 수축기 혈압과 양의 상관관계를 보였다(P<0.05). 결 론 : 터너증후군 성인 환자들에서 대사증후군의 위험성이 있으며, 인슐린 저항성과 대사증후군 관련요인 간에 상관관계를 보인다. 터너증후군 환자들에게서 대사관련 요인을 일정기간 마다 검사하여 대사증후군 또는 인슐린 저항성으로의 진행여부를 감시하고 심혈관 합병증을 예방하는 것이 필요하다.

열응답시험 데이터를 이용한 SCW형 지중열교환기 블리딩 효과 분석 (An Analysis on the Bleeding Effect of SCW Ground Heat Exchanger using Thermal Response Test Data)

  • 장근선;김민준
    • 한국산학기술학회논문지
    • /
    • 제21권1호
    • /
    • pp.512-520
    • /
    • 2020
  • 개방형 지중열교환기(SCW)는 수직 밀페형 지중열교환기에 비해 높은 용량과 효율을 갖고 있어 최근에 우리나라에서 많이 보급되고 있는 추세이다. SCW형 지중열교환기의 여러 설계 및 운전변수 중 블리딩 운전이 지중 열전도율, 보어홀 열저항 등 열성능 개선에 가장 효과가 큰 것으로 보고되고 있다. 본 연구에서는 SCW형 지중열교환기가 설치된 현장의 열응답시험 결과를 기반으로 블리딩해석 모델을 정립하고 블리딩율 및 지하수 유입수의 위치변화가 SCW형 지중열교환기 열성능에 미치는 영향을 수치해석을 통하여 고찰하였다. 해석결과 지하수가 지중열교환기 상부에서 유입될 경우 지중열교환기 순환수의 시간에 따른 온도증가는 블리딩율이 증가함에 따라 낮아지는 경향을 보였으며, 지중 열전도율은 30% 블리딩율에서 179% 증가하는 결과를 보였다. 반면에 지하수가 지중열교환기 하부에서 유입될 경우 지중열교환기 순환수는 지중과 먼저 열교환을 한 후 유입수와 하단에서 혼합되기 때문에 지중열교환기 순환수의 온도증가는 상부 유입의 경우보다 적으며 블리딩율이 약 10%를 초과하면 일정하게 유지되는 경향을 보였다.

Variance Components and Genetic Parameters for Milk Production and Lactation Pattern in an Ethiopian Multibreed Dairy Cattle Population

  • Gebreyohannes, Gebregziabher;Koonawootrittriron, Skorn;Elzo, Mauricio A.;Suwanasopee, Thanathip
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제26권9호
    • /
    • pp.1237-1246
    • /
    • 2013
  • The objective of this study was to estimate variance components and genetic parameters for lactation milk yield (LY), lactation length (LL), average milk yield per day (YD), initial milk yield (IY), peak milk yield (PY), days to peak (DP) and parameters (ln(a) and c) of the modified incomplete gamma function (MIG) in an Ethiopian multibreed dairy cattle population. The dataset was composed of 5,507 lactation records collected from 1,639 cows in three locations (Bako, Debre Zeit and Holetta) in Ethiopia from 1977 to 2010. Parameters for MIG were obtained from regression analysis of monthly test-day milk data on days in milk. The cows were purebred (Bos indicus) Boran (B) and Horro (H) and their crosses with different fractions of Friesian (F), Jersey (J) and Simmental (S). There were 23 breed groups (B, H, and their crossbreds with F, J, and S) in the population. Fixed and mixed models were used to analyse the data. The fixed model considered herd-year-season, parity and breed group as fixed effects, and residual as random. The single and two-traits mixed animal repeatability models, considered the fixed effects of herd-year-season and parity subclasses, breed as a function of cow H, F, J, and S breed fractions and general heterosis as a function of heterozygosity, and the random additive animal, permanent environment, and residual effects. For the analysis of LY, LL was added as a fixed covariate to all models. Variance components and genetic parameters were estimated using average information restricted maximum likelihood procedures. The results indicated that all traits were affected (p<0.001) by the considered fixed effects. High grade $B{\times}F$ cows (3/16B 13/16F) had the highest least squares means (LSM) for LY ($2,490{\pm}178.9kg$), IY ($10.5{\pm}0.8kg$), PY ($12.7{\pm}0.9kg$), YD ($7.6{\pm}0.55kg$) and LL ($361.4{\pm}31.2d$), while B cows had the lowest LSM values for these traits. The LSM of LY, IY, YD, and PY tended to increase from the first to the fifth parity. Single-trait analyses yielded low heritability ($0.03{\pm}0.03$ and $0.08{\pm}0.02$) and repeatability ($0.14{\pm}0.01$ to $0.24{\pm}0.02$) estimates for LL, DP and parameter c. Medium heritability ($0.21{\pm}0.03$ to $0.33{\pm}0.04$) and repeatability ($0.27{\pm}0.02$ to $0.53{\pm}0.01$) estimates were obtained for LY, IY, PY, YD and ln(a). Genetic correlations between LY, IY, PY, YD, ln(a), and LL ranged from 0.59 to 0.99. Spearman's rank correlations between sire estimated breeding values for LY, LL, IY, PY, YD, ln(a) and c were positive (0.67 to 0.99, p<0.001). These results suggested that selection for IY, PY, YD, or LY would genetically improve lactation milk yield in this Ethiopian dairy cattle population.

Estimation of genetic parameters of the productive and reproductive traits in Ethiopian Holstein using multi-trait models

  • Ayalew, Wondossen;Aliy, Mohammed;Negussie, Enyew
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제30권11호
    • /
    • pp.1550-1556
    • /
    • 2017
  • Objective: This study estimated the genetic parameters for productive and reproductive traits. Methods: The data included production and reproduction records of animals that have calved between 1979 and 2013. The genetic parameters were estimated using multivariate mixed models (DMU) package, fitting univariate and multivariate mixed models with average information restricted maximum likelihood algorithm. Results: The estimates of heritability for milk production traits from the first three lactation records were $0.03{\pm}0.03$ for lactation length (LL), $0.17{\pm}0.04$ for lactation milk yield (LMY), and $0.15{\pm}0.04$ for 305 days milk yield (305-d MY). For reproductive traits the heritability estimates were, $0.09{\pm}0.03$ for days open (DO), $0.11{\pm}0.04$ for calving interval (CI), and $0.47{\pm}0.06$ for age at first calving (AFC). The repeatability estimates for production traits were $0.12{\pm}0.02$, for LL, $0.39{\pm}0.02$ for LMY, and $0.25{\pm}0.02$ for 305-d MY. For reproductive traits the estimates of repeatability were $0.19{\pm}0.02$ for DO, and to $0.23{\pm}0.02$ for CI. The phenotypic correlations between production and reproduction traits ranged from $0.08{\pm}0.04$ for LL and AFC to $0.42{\pm}0.02$ for LL and DO. The genetic correlation among production traits were generally high (>0.7) and between reproductive traits the estimates ranged from $0.06{\pm}0.13$ for AFC and DO to $0.99{\pm}0.01$ between CI and DO. Genetic correlations of productive traits with reproductive traits were ranged from -0.02 to 0.99. Conclusion: The high heritability estimates observed for AFC indicated that reasonable genetic improvement for this trait might be possible through selection. The $h^2$ and r estimates for reproductive traits were slightly different from single versus multi-trait analyses of reproductive traits with production traits. As single-trait method is biased due to selection on milk yield, a multi-trait evaluation of fertility with milk yield is recommended.

Ralstron 선원대체형 Ir-192 원추선원의 선량 전산화 모델링 (Dose Computation Modeling for Frustum Typed Ir-192 of Ralstron Source)

  • 최태진
    • 한국의학물리학회지:의학물리
    • /
    • 제12권1호
    • /
    • pp.19-29
    • /
    • 2001
  • 방사선의 에너지가 비교적 낮은 선원은 알짜선원의 방사능크기와 캡슐을 통과한 선량으로 나타내는 겉보기방사능크기로 구분할 필요가 있다. 저자는 국내 도입된 Ralstron 강내조사장치에 사용할 고선량률 Ir-192 선원을 고안제작하여 선원-캡슐간 필터효과를 조사하였다. 선원은 직경 1.5mm 와 높이 1.5mm 이고, 선원캡슐의 외경과 길이는 각각 3.0 mm 와 12.0mm로 원형과 동일한 외형을 하고 있다. 선원의 필터에 의한 선량감쇠는 66.3%로 나타났으며, 단위 방사능 강도에 의한 기준 출력선량은 선원 측방 1cm 거리에 도달되는 조직선량을 기준선량으로 규격화하였으며, 기준선량은 0.0013511cGy/mCi -sec (cGy/37MBq-sec) 로 나타났다. 선원하부는 스텐필터 두께의 영향으로 동일 거리의 측방 위치의 조직선량에 비해 약 52%의 선량감쇠를 보이고 있다. 그러나 선원하부 에서 측방 영역으로 갈수록 스텐 필터에 의한 선량감쇠효과가 줄어드는 것을 확인할 수 있었다. 선원중심에서 상하 45도 대각선 방향의 선량을 비교한 바 상부 대각선 방향의 선량이 하부의 것에 비해 약 4% 크게 나타났으며, 이는 선원 상부의 캡슐용기의 모양을 경사지게 한 결과 필터효과가 상대적으로 적음을 알 수 있다. 선원과 케이블이 있는 선원축의 연결케이블과 근접한 20도이내의 영역에서는 필터효과의 변화가 커서 40%의 선량감쇠를 보였으나, 축에서 떨어질수록 균등한 동심원의 선량분포를 얻었다.

  • PDF

직선도 개선을 위한 엔드밀링머시인 의 적응제어 (Adaptive Control of End Milling Machine to Improve Machining Straightness)

  • 김종선;정성종;이종원
    • 대한기계학회논문집
    • /
    • 제9권5호
    • /
    • pp.590-597
    • /
    • 1985
  • 본 논문에서는 위치오차는 가공전 밀링베드를 수치제어 장치를 이용하여 가공 면에 수직한 방향으로 움직여 수치제어 장치인 스텝모우터의 분해능 한계 내에서 보정 하고 또한 공구휨에 상당하는 만큼 이 송속도를 더함으로써 제어하며, 파형오차는 이 송속도와 공구처짐 사이의 관계를 수정된 Taylor의 공구식으로 모형화하고 절삭공정중 이송속도를 적절히 조절하여 공구의 휨양을 제어함으로써 스텝모우터를 갖는 밀링머시 인에서 길이 508mm,두께 20mm의 두꺼운 철판을 평면절삭하는 경우 직진도오차를 최소 로 하는 GAC 방법을 개발하였다.측정은 밀링머시인 자체의 구조적, 동적변화나 절삭 조건의 변화, 공구의 재질 및 마멸상태의 변화, 공작물의 재질 변화등에 적응할 수 있 도록 Fig. 2에 보인 바와 같이 등간격으로 배열된 100개의 위치에서 가공후(post-pro- cess)측정을 통하여 취하였고, 절삭계수의 추정은 측정점을 각각 10개씩 10개의 구간 으로 묶어 각 구간에서의 계의 특성이 변하지 않는다는 가정하에서 계수를 지수가중 반복최소 자승(exponentially weighted recursive least squares, EWRLS)법을 이용하 여 추정하였고, 실제 절삭작업중 모델의 계수변화에 대한 사전 지식이 없이도 이들 계 수들을 보정시킴으로써 최적의 직진도를 얻을 수 있는 절삭조건을 제시하였다. 그리 고 이 방법의 도입으로 단일(SINGLE-PASS)밀링작업이 가능함을 보였고 또한 방법의 타 당성을 증명하기 위하여 여러 경우의 절삭상태에서 실험을 수행하였다.

신뢰도 지수를 적용한 하천제방의 위험도 평가 (Risk Assessment of Levee Embankment Applying Reliability Index)

  • 안기홍;한건연;김병현
    • 한국수자원학회논문집
    • /
    • 제42권7호
    • /
    • pp.547-558
    • /
    • 2009
  • 일반적인 하천제방의 안정성 평가는 확정론적 분석결과를 토대로 강우특성, 매개변수 등에 대한 불확실성을 안전 계수를 도입하여 실시하고 있다. 이러한 안전계수는 모형의 매개변수 및 재료 속성의 다양성을 다루는 공학에 폭넓게 이용되나 임의의 자연 현상의 모든 것을 설명해주지는 않는다. 특히 근래에 들어 발생되는 지구온난화에 따른 이상기후 현상과 사상 유래가 없는 홍수들의 발생은 확정론적인 방법에 의존하기보다는 추계학적 방법을 도입한 수문량 확충 및 매개변수의 불확실성 분석의 필요성이 증대되고 있다. 이에 전 세계적으로 매개변수와 특성인자의 불확실성을 고려하고 인자들 간의 상관관계를 고려한 추계학적 방법 기반의 대책 수립이 추진되고 있는 상황이다. 본 연구에서는 추계학적 강우변동 생성기법을 이용하여 태풍기와 장마기에 해당하는 6월, 7월과 8월, 9월에 발생 가능한 다양한 무차원 누가강우량곡선을 Monte Carlo 기법을 도입하여 생성하였고 신뢰도 지수를 이용하여 하천제방의 위험도를 평가하였다. 본 연구결과는 강우의 지역적 특성 및 시간적 특성을 반영할 수 있어 해당 유역의 홍수대책 수립, 수공구조물 설계 및 분석 등 활용성이 매우 클 것으로 판단된다.