• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.914-917
• /
• 2003

This study was undertaken to find the optimum condition for the Maillard browning reaction of tagatose and glycine model solution by applying the response surface methodology. Independent variables were pH (3, 5, 7), temperature (70, 85, $100^{\circ}C$), and time (60, 180, 300 min), while the dependent variables were absorbance, yellowness, color difference, and organoleptic score. The quadratic models with the cross-product proved to be suitable, due to the high coefficients of determination and the lack of fit results. Since all the dependent variables had saddle points, the optimal points were determined through ridge analysis. For absorbance, yellowness, and color difference, the optimal points were the lowest values; in contrast, the optimal point of organoleptic score was the highest value.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.884-892
• /
• 2003

This study was conducted to optimize the water homogenization process of mandarin orange peel for colored rice. Four variables were used to determine the optimum conditions for homogenization speed, time, temperature, and water volume with a five level central composite design and response surface methodology. The process was optimized using the combination of EI and b values of rice coated with water extract of the mandarin orange peel. The effect of water volume was the most significant compared to the other variables on the quality of water homogenate. The regression polynomial model was a suitable (p>0.05) model by lack-of-fit analysis showing high significance. To optimize the process, based on surface response and contour plots, individual contour plots for the response variables were superimposed. The optimum conditions for manufacturing water extract from mandarin orange was with 8,500 rpm homogenization speed, 2.8 min time, $53^{\circ}C$ temperature, and 42 mL water volume with the maximum of restricted variables of EI above 400 and h value above 24.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.5
• /
• pp.611-621
• /
• 2005

State of problem: Zirconia all-ceramic restoration fabricated with CAM system is on an increasing trend in dentistry. However, evaluation of the marginal and internal fits of zirconia bridge seldomly have been reported. Purpose: This study was to evaluate the at of margin and internal surface in posterior 3-unit zirconia bridge framework fabricated with CAM system(DeguDent, Germany). Material and Method: Preparations of secondary premolar and secondary molar on artificial resin model were performed for fabrication of 3-unit posterior bridge framework. Fits of 5 zirconia bridge framework were compared with 5 precious ceramo-metal alloy framework(V-GnathosPlus, Metalor, Switzerland), and prepared margins were designed to chamfer and shoulder finishing line. Each framework was cemented to epoxy resin model with reinforced glass ionomer(FujiCEM, GC Co., Japan), embedded in acrylic resin and sectioned in two planes, mesio-distal and buccolingual. Samples were divided into six pieces by sectioning and had two pieces of each surface(i.e mesial, distal, buccal and lingual surface) per abutment, so there were eight measuring points in each abutment. External gap was measured at the margin and internal gaps were measured at the margin, axial and occlusal surface. Gaps were observed under the measuring microscope(Compact measuring microscope STM5; Olympus, Japan) at a magnification of $\times100$. T-test were used to determine the statistic significance of the different gaps between zirconia and metal framework. Results and Conclusion: 1. External and internal marginal gaps of zirconia and metal framework were in clinically acceptable range. External marginal gaps were not different significantly between zirconia$(81.9{\mu}m)$ and metal $(81.3{\mu}m)$ framework and internal marginal gaps of zirconia $(44.6{\mu}m)$ were smaller than those of metal framework $(58.6{\mu}m)$. 2. Internal axial gaps of zirconia framework$(96.7{\mu}m)$ were larger than those of metal frame-work$(78.1{\mu}m)$ significantly and adversely, internal occlusal gaps of zirconia frame-work$(89.4{\mu}m)$ were smaller than those of metal framework $(104.9{\mu}m)$ significantly. 3. There were no significant differences in external and internal marginal gaps between chamfer and shoulder finish line when zirconia frameworks were fabricated.

• Culinary science and hospitality research
• /
• v.18 no.4
• /
• pp.1-14
• /
• 2012

The focus of this study is on investigating an appropriate selling strategy for the guests of a fine dining restaurant in deluxe hotels located on seoul. As survey methods, questionnaires were prepared and distributed to the customers who visited the restaurants of five-star hotels in Seoul. The survey was carried out from July 1 to August 30, 2010. Total 223 copies of questionnaire were used for final analysis. Frequency analysis, descriptive statistics, exploration factor analysis, and reliability analysis were conducted through SPSS 18.0 for final analysis, and path analysis was conducted through AMOS 18.0 for verification of hypotheses. The hypothesized relationships among the models were tested simultaneously by using a structure equation model(SEM). The proposed model provided an adequate fit to the date, $X^2$ = 143.934(df=120, p<.001), GFI=0.935. AGFI= 0.907, RMR=0.022, CFI=0.983. The study results are as follows. First, the restaurant employee's adaptive selling strategies consist of persuasion-suggestion, kindness-rapidity. Second, in the result of analysis to understand the influences between customer satisfaction and adaptive selling strategies, customer satisfaction is shown to have an influential relationships with persuasion-suggestion strategy and kindness-rapidity strategy of employee's adaptive selling. Third, all adaptive selling strategies did not affect customer loyalty. Finally, customers who are satisfied with such services have a significant effect on customer loyalty and supports the existing previous studies.

• Journal of The Korean Astronomical Society
• /
• v.37 no.4
• /
• pp.199-203
• /
• 2004

The gas response to a proposed spiral stellar pattern for our Galaxy is presented here as calculated via 2D hydrodynamic calculations utilizing the ZEUS code in the disk plane. The locus is that found by Drimmel (2000) from emission profiles in the K band and at 240 ${\mu}m$. The self-consistency of the stellar spiral pattern was studied in previous work (see Martos et al. 2004). It is a sensitive function of the pattern rotation speed, $\Omega$p, among other parameters which include the mass in the spiral and its pitch angle. Here we further discuss the complex gaseous response found there for plausible values of $\Omega$p in our Galaxy, and argue that its value must be close to $20 km s^{-l}\;kpc^{-1}$ from the strong self-consistency criterion and other recent, independent studies which depend on such parameter. However, other values of $\Omega$p that have been used in the literature are explored to study the gas response to the stellar (K band) 2-armed pattern. For our best fit values, the gaseous response to the 2-armed pattern displayed in the K band is a four-armed pattern with complex features in the interarm regions. This response resembles the optical arms observed in the Milky Way and other galaxies with the smooth underlying two-armed pattern of the old stellar disk populations in our interpretation. The complex gaseous response appears to be related to resonances in stellar orbits. Among them, the 4:1 resonance is paramount for the axisymmetric Galactic model employed, and the set of parameters explored. In the regime seemingly proper to our Galaxy, the spiral forcing appears to be marginally strong in the sense that the 4:1 resonance terminates the stellar pattern, despite its relatively low amplitude. In current work underway, the response for low values of $\Omega$p tends to remove most of the rich structure found for the optimal self-consistent model and the gaseous pattern is ring-like. For higher values than the optimal, more features and a multi-arm structure appears.

• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.85-92
• /
• 2018

In this study investigated the factors for the career preparation behaviors of social welfare major students based on Lent et al. (1994)'s Social-cognitive Career Theory so as to provide essential baseline data for establishing proper career support strategies that suit the distinctive nature of social welfare studies. The participants of this study are 132 social welfare major students from three colleges who have completed social welfare field education. This study analyzed the relationship between cognitive factor (outcome expectation), vocational interest factor (major selection satisfaction), goal factor (career decision level), and work performance factor (career preparation behavior). For analysis, SPSS 24.0 and AMOS 24.0 were used. The analysis results are as follows. First, the model's goodness of fit was found to be at a statistically ideal level with CFI=.904, TLI=.887, and RMSEA=.068. Second, the result of analyzing the correlation between the primary variables is as follows: as outcome expectation increased, major selection satisfaction grew, which then increased the career decision level and led to the improvement in career preparation behavior. These results indicate the importance of developing a customized route support program considering the perceived and interesting factors of individual students to improve their career preparation behavior for social welfare majors.

• Clean Technology
• /
• v.26 no.2
• /
• pp.122-130
• /
• 2020

The isotherm, kinetic, and thermodynamic parameters of reactive blue 4 adsorbed by activated carbon were investigated for activated carbon dose, pH, initial concentration, contact time, and temperature data. The adsorption of the RB 4 dye by activated carbon showed a concave shape in which the percentage of adsorption increased in both directions starting from pH 7. The isothermal adsorption data were applied to Langmuir, Freundlich, and Temkin isotherms. Both Freundlich and Langmuir isothermal adsorption models fit well. From determined Freundlich separation factor (1/n = 0.125 ~ 0.232) and Langmuir separation factor (R_L = 1.53 ~ 1.59), adsorption of RB 4 by activated carbon could be employed as an effective treatment method. The constant related to the adsorption heat (B_T = 2.147 ~ 2.562 J mol^-1) of Temkin showed that this process was physical adsorption. From kinetic experiments, the adsorption process followed the pseudo second order model with good agreement. The results of the intraparticle diffusion model showed that the inclination of the first straight line representing the surface diffusion was smaller than that of the second straight line representing the intraparticle pore diffusion. Therefore, it was confirmed that intraparticle pore diffusion is the rate-controlling step. The negative Gibbs free energy change (ΔG = -3.262 ~ -7.581 kJ mol^-1) and the positive enthalpy change (ΔH = 61.08 kJ mol^-1) indicated the spontaneous and endothermic nature of the adsorption process, proving this process to be spontaneous and endothermic.

• The Korean Journal of Mycology
• /
• v.27 no.4 s.91
• /
• pp.304-311
• /
• 1999

Batch kinetics during the exo-polysaccharide (EPS) fermentation of Ganoderma lucidum was investigated as a function of different substrates (glucose and starch), substrate concentration $(1{\sim}7%,\;w/v)$ and subculture (3 times). Logistic model for mycelial growth fitted the experimental data better than Monod and two thirds power model. The Luedeking-Pirt equation was adequate to fit the kinetic data of product formation and substrate consumption. The EPS production was strongly non-growth associated, although it was mixed type. The product formation and sustrate consumption by growth associated mechanism decreased as the concentration of glucose increased, while those of the non-growth associated mechanism increased. However, starch medium increased the growth associated and non-growth associated substrate consumption indicating higher availability of substrate. Also, batch culture in starch medium showed the higher specific growth rate and stability during subculture than those in glucose medium. In conclusion, the enhanced EPS production and stability in the subculture was found to be remarkably improved by use of starch as sole carbon source in medium. The maximum mycelium dry weight and EPS production of 9.463 and 10.410 g/l, respectively, were obtained after shake culture of 7 days at $30^{\circ}C$ from the media containing 7% starch.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.3
• /
• pp.458-465
• /
• 2011

Response surface methodology (RSM) was applied to optimize substrate conditions of ribose and hydrolyzed wheat gluten solution for Maillard reaction. Independent variables were NaCl concentration of hydrolyzed wheat gluten ($X_1$), concentration of ribose ($X_2$) and concentration of hydrolyzed wheat gluten ($X_3$), while the dependent variables of the central composite design (CCD) were browning index (absorbance 420 nm), DPPH radical scavenging activity (DF) and sensory preference (score). Optimum substrate conditions at $140^{\circ}C$, 30 min reaction were 3% NaCl concentration of hydrolyzed wheat gluten, 6.2% concentration of ribose and 13.27% concentration of hydrolyzed wheat gluten. The coefficients of determination ($R^2$) were 0.975, 0.960 and 0.854, the model fit was very significant (p<0.001). DPPH radical scavenging activities and sensory preferences were predicted as 700 (DF) and 8.42 (score), respectively. The model solution increased more browning and DPPH radical scavenging activities with increasing ribose and hydrolyzed wheat gluten concentration. Especially hydrolyzed wheat gluten concentration was the most influential factor, while NaCl concentration of hydrolyzed wheat gluten hardly affected the responses. Sensory preference was increased with rising wheat gluten concentration and decreasing NaCl concentration of hydrolyzed wheat gluten.

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.501-511
• /
• 2016

Predicting potential spatial distribution of Monochamus alternatus, a major insect vector of the pine wilt disease, is essential to the spread of the pine wilt disease. The purpose of this study was to predict future domestic spatial distribution of M. alternatus by using the CLIMEX model considering the temperature condition of the vector's life history. To predict current distribution of M. alternatus, the administrative divisions data where the pine wilt spots caused by M. alternatus were found from 2006 to 2014 and the 10-year mean climate observed data in 68 meteorological stations from 2006 to 2015 were used. Eight parameter sets were chosen based on growth temperature range of M. alternatus reported in preceding researches. Error matrix method was utilized to select and simulate the parameter sets showing the highest correlation with the actual distribution. Regarding the future distribution of M. alternatus, two periods of 2050s(2046-2055) and 2090s(2091-2100) were predicted using the projected climate data of RCP 8.5 Scenario generated from Korea Meteorological Administration. Overall results of M. alternatus distribution simulation were fit in the actual distribution; however, overestimation in Seoul Metropolitan area and Chungnam Region were shown. Gradual expansion of M. alternatus would be expected to nationwide from western and southern coastal areas of Korea peninsula.