• Journal of radiological science and technology
• /
• v.32 no.3
• /
• pp.271-276
• /
• 2009

The aim of this study was to evaluate the effect of Bone Mineral Density(BMD) at mandible. So, we studied how to measure the BMD at mandible using DEXA(Dual energy X-ray absorptiometry, DEXA) by Horner er al (1996) and knew reproducibility of the measurements. Thirty-five patients (13 men, 22 women, mean age : 25.4 years) were examined using the GE Lunar Prodigy Advance(LUNAR Corporation, madison, USA). They were examined in Semiprone position of their body and true lateral position of their mandible selected the Lumbar lateral mode. We used the custom mode in analysis when ROI (area $30{\times}2.5\;mm^2$). Three ROIs ($30{\times}2.5\;mm^2$, $50{\times}2.5\;mm^2$, $20{\times}2.5\;mm^2$) were located each at the two different sites of the mandible (angle of mandible and mental symphysis) and BMD was measured. Differences in BMD measurement was statistically compared according to the size and location of ROI. BMD was $1.320{\pm}0.358g/cm^3$ in men and was $1.152{\pm}0.340g/cm^3$ in women. BMD at the angle of mandible was $1.201{\pm}0.361g/cm^3$ in men and was $1.025{\pm}0.377g/cm^3$ in women. BMD of men at the mental symphysis was $1.434{\pm}0.341g/cm^3$ and that of women was $1.19{\pm}0.358g/cm^3$. With the ROI of $20{\times}2.5\;mm^2$, BMD was $1.262{\pm}0.384g/cm^3$ in men and was $1.113{\pm}0.357g/cm^3$ in women. With the ROI of $50{\times}2.5\;mm^2$, BMD of men was $1.320{\pm}0.358g/cm^3$ and that of women was $1.129{\pm}0.340g/cm^3$. There was a statistically significant difference of BMD according to the size and location of ROI. When measuring mandible BMD, there are good for increasing ROI and locate between ramus and mental symphysis. Especially following exam, refer to same size and location with fore exam. According to study which measure mandible BMD, It's correct to measure better a portion of mandible then whole of BMD. Using DEXA protocol is studied good for the additional study to compare the BMD at mandible. Later date, It will be good for measurement value in implant and bone graft quantitatively. Using DEXA method gain BMD threshold value in korean.

• Journal of Korean Society of Transportation
• /
• v.23 no.3 s.81
• /
• pp.95-108
• /
• 2005

The purpose of this study is to develop the ITS evaluation model using the Probabilistic Risk Analysis (PRA) methodology and to demonstrate the goodness-of-fit of the large ITS projects through the comparative analysis between DEA and PRA model. The results of this study are summarized below. First, the evaluation mode] using PRA with Monte-Carlo Simulation(MCS) and Latin-Hypercube Sampling(LHS) is developed and applied to one of ITS projects initiated by local government. The risk factors are categorized with cost, benefit and social-economic factors. Then, PDF(Probability Density Function) parameters of these factors are estimated. The log-normal distribution, beta distribution and triangular distribution are well fitted with the market and delivered price. The triangular and uniform distributions are valid in benefit data from the simulation analysis based on the several deployment scenarios. Second, the decision making rules for the risk analysis of projects for cost and economic feasibility study are suggested. The developed PRA model is applied for the Daejeon metropolitan ITS model deployment project to validate the model. The results of cost analysis shows that Deterministic Project Cost(DPC), Deterministic Total Project Cost(DTPC) is the biased percentile values of CDF produced by PRA model and this project need Contingency Budget(CB) because these values are turned out to be less than Target Value(TV;85% value), Also, this project has high risk of DTPC and DPC because the coefficient of variation(C.V) of DTPC and DPC are 4 and 15 which are less than that of DTPC(19-28) and DPC(22-107) in construction and transportation projects. The results of economic analysis shows that total system and subsystem of this project is in type II, which means the project is economically feasible with high risk. Third, the goodness-of-fit of PRA model is verified by comparing the differences of the results between PRA and DEA model. The difference of evaluation indices is up to 68% in maximum. Because of this, the deployment priority of ITS subsystems are changed in each mode1. In results. ITS evaluation model using PRA considering the project risk with the probability distribution is superior to DEA. It makes proper decision making and the risk factors estimated by PRA model can be controlled by risk management program suggested in this paper. Further research not only to build the database of deployment data but also to develop the methodologies estimating the ITS effects with PRA model is needed to broaden the usage of PRA model for the evaluation of ITS projects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.424-434
• /
• 2009

Statement of problem: Problems such as loosening and fractures of retained screws and fracture of implant fixture have been frequently reported in implant prosthesis. Purpose: Implant has weak mechanical properties against lateral loading compared to vertical occlusal loading, and therefore, stress analysis of implant fixture depending on its material and geometric features is needed. Material and methods: Total 28 of external hexed implants were divided into 7 of 4 groups; Group A (3i, FULL $OSSEOTITE^{(R)}$Implant), Group B (Nobelbiocare, $Br{\aa}nemark$ $System^{(R)}$Mk III Groovy RP), Group C (Neobiotec, $SinusQuick^{TM}$ EB), Group D (Osstem, US-II). The type III gold alloy prostheses were fabricated using adequate UCLA gold abutments. Fixture, abutment screw, and abutment were connected and cross-sectioned vertically. Hardness test was conducted using MXT-$\alpha$. For fatigue fracture test, with MTS 810, the specimens were loaded to the extent of 60-600 N until fracture occurred. The fracture pattern of abutment screw and fixture was observed under scanning electron microscope. A comparative study of stress distribution and fracture area of abutment screw and fixture was carried out through finite element analysis Results: 1. In Vicker's hardness test of abutment screw, the highest value was measured in group A and lowest value was measured in group D. 2. In all implant groups, implant fixture fractures occurred mainly at the 3-4th fixture thread valley where tensile stress was concentrated. When the fatigue life was compared, significant difference was found between the group A, B, C and D (P<.05). 3. The fracture patterns of group B and group D showed complex failure type, a fracture behavior including transverse and longitudinal failure patterns in both fixture and abutment screw. In Group A and C, however, the transverse failure of fixture was only observed. 4. The finite element analysis infers that a fatigue crack started at the fixture surface. Conclusion: The maximum tensile stress was found in the implant fixture at the level of cortical bone. The fatigue fracture occurred when the dead space of implant fixture coincides with jig surface where the maximum tensile stress was generated. To increase implant durability, prevention of surrounding bone resorption is important. However, if the bone resorption progresses to the level of dead space, the frequency of implant fracture would increase. Thus, proper management is needed.

• (The) Research of the performance art and culture
• /
• no.18
• /
• pp.315-346
• /
• 2009

Korean 'Sin-Pa' play is a way to examine self-reliance of Korean culture and influence of Japanese culture on the Korean one in the early modern times. Although the 'Sin-Pa' play has been estimated negatively in many aspects, such an estimation can be different depending on the methodology. Therefore, I tried to explain a characteristics of the rise of 'Sin-Pa' play. While making these trials, I made efforts to reappreciate the developing process of Korean 'Sin-Pa' play and its theatrical structure and value. Particularly, I focused on structure of 'Sin-Pa' play in the context of an actual cognition of colonized Korea. Based on the 'Sin-Pa' play's repertoires I found out that one of the representative characteristics of Korean 'Sin-Pa' play is a changing process from orality to literacy. And I made attempts to uncover some ideological functions and their effects of 'Sin-Pa' play, focusing on and whose story line is usually consisted of 'provocation-pangs-defeat' while it interacted with 'provocation-pangs-penalty' of the structure of melodrama under the contemporary cultural conditions. 'Sin-Pa'' play can be considered as a performance mode to accept the Japanese value embedded in the colonized Korea since the 1910s on the one hand and to resist the overwhelming power of western culture imported through Japan on the other hand. In other words, it was closely related with the cultural-field of that period. Based on these results of this research, I tried to outline what the mode of 'Sin-Pa' was, what it reflected, and what it desired for under the influence of the contemporary cultural conditions. I analysed double qualities of 'Sin-Pa' play as a dominant narrative and/or a resistant narrative considering its relationship with the people of colonized Korea. And also I examined the place of the 'Sin-Pa' play in the history of theatre and in the history of culture.

• (The) Research of the performance art and culture
• /
• no.22
• /
• pp.371-411
• /
• 2011

In the twenty first century of rapid cultural change performing art requires new mode of expression based on imaginative power and creativity as well as establishing its own identity. The modern technological environment support this with advanced technology and bring about the expansion of reason from new experience. The introduction of digital media on artistic expression in particular, expands the physical ability of human body which is the main subject of performing art. A virtual body from digital technology is freed from physical boundaries and goes over space and time. It also suggests the possibility of new mode of communication with audience. This study aims at examining the subject of performing art and its digitalized movement focusing on EveR, the world's first professional robot actor. The robot actor which came on stage according to the new expression medium, a digital body, stands in need not only of technological value but also of cultural and artistic application for expression in art. In this endeavor to meet the demand, this study examines the development process and function of 'EveR' the robot actor. Also it searches into the performance of Ever which replaced human being as well as the historical significance of the title:the world's first. To be more specific, there is a example research on two performances:a pansori play "EveR is simply stunning(2009)" and children's play "The Robot Princess and Seven Dwarfs(2009)." Through this example research, it is enabled to anticipate the influence of robot actors on performing arts and to search for the better way of them to evolve. Furthermore, it aims at finding ways to create high value through promoting robot actors to be familiar to the public as well as supporting them to become active cultural contents. The performance with robotic technology is one of the artistic experiment that may cause the change of the future of performing art by actualizing technological imagination together with human body and machinery. As a consequence, it is expected that the meeting of performing art and robotic technology gives positive influence on activating performing art as one of the integrated cultural phenomenon which satisfies the taste of modern era. Moreover, this study may also be the beginning of the expansion of performing art to stretch to diverse field.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.2
• /
• pp.69-84
• /
• 1984

This study was carried out to investigate the time distribution of single storms and to establish the model of storm patterns in korea. Rainfall recording charts collected from 42 metheorological stations covering the Korean peninsula were analyzed. A single storm was defined as a rain period seperated from preceding and succeeding rainfall by 6 hours and more. Among the defined single storms, 1199 storms exceeding total rainfall of 80 mm were qualified for the study. Storm patterns were cklassified by quartile classification method and the relationship between cummulative percent of rainfalls and cummulative storm time was established for each quartile storm group. Time distribution models for each stations were prepared through the various analytical and inferential procedures. Obtained results are summarized as follows: 1. The percentile frequency of quartile storms for the first to the fourth quartile were 22.0%, 26.5%, 28.9% and 22.6%, respectively. The large variation of percentile frequency was show between the same quartile storms. The advanced type storm pattern was predominant in the west coastal type storm patterns predominantly when compared to the single storms with small total rainfalls. 3. The single storms with long storm durations tended to show delayed type storm patterns predominantly when compared to the single storms with short storm durations. 4. The percentile time distribution of quartile storms for 42 rin gaging stations was estimated. Large variations were observed between the percentiles of time distributions of different stations. 5. No significant differences were generally found between the time distribution of rainfalls with greater total rainfall and with less total rainfall. This fact suggests that the size of the total rainfall of single storms was not the main factor affecting the time distribution of heavy storms. 6. Also, no significant difference were found between the time distribution of rainfalls with long duration and with short duration. The fact indicates that the storm duration was no the main factor affecting the time distribution of heavy storms. 7. In Korea, among all single storms, 39.0% show 80 to 100mm of total rainfall which stands for the mode of the frequency distribution of total rainfalls. The median value of rainfalls for all single storms from the 42 stations was 108mm. The shape of the frequency distribution of total rainfalls showed right skewed features. No significant differences were shown in the shape of distribution histograms for total rainfall of quartile storms. The mode of rainfalls for the advanced type quartile storms was 80~100mm and their frequencies were 39~43% for respective quartiles. For the delayed type quartile storms, the mode was 80~100mm and their frequencies were 36!38%. 8. In Korea, 29% of all single storms show 720 to 1080 minutes of storm durations which was the highest frequency in the frequency distribution of storm durations. The median of the storm duration for all single storms form 42 stations was 1026 minutes. The shape of the frequency distribution was right skewed feature. For the advanced type storms, the higher frequency of occurrence was shown by the single storms with short durations, whereas for the delayed type quartile storms, the higher frequency was shown gy the long duration single storms. 9. The total rainfall of single storms was positively correlated to storm durations in all the stations throughout the nation. This fact was also true for most of the quartile storms. 10. The third order polynomial regression models were established for estimating the time distribution of quartile storms at different stations. The model test by relative error method resulted good agreements between estimated and observed values with the relative error of less than 0.10 in average.

• Cartoon and Animation Studies
• /
• s.29
• /
• pp.209-241
• /
• 2012

Is a failed blockbuster film? Is there no room for reconsideration of the value of the film in terms of its contents and forms? The purpose of this study is to answer these questions. In 2007, SHIM Hyung-rae's was in the limelight due to the nationalist discourse around the film rather than evaluation of the film itself. In terms of its narrative and formal properties, the film showed the difference from the Korean nationalist blockbuster films. It led to the disaccord and hard-to-understand results of having somewhat disappointed box-office success of 8,500,000 audiences in comparison to the input, of receiving well by a generous part of the audiences absorbed by nationalism, and of getting the critics' cynic criticism of the film's cinematic value. Eventually only provided the cultural battlefield of nationalism, was left as an unnoticed film in the realm of industry and criticism. However, it was interesting that there was a common ground between the film's supporters and the cynic critics. Both sides were being acknowledged that the spectacle of was way out of proportion to the degree that the spectacle was unbalanced with the story unfolding, achieved more than expected. Its spectacle overwhelming the narrative enfever a few audiences, and at the same time, it provided some reasons making critics face away from the film. In this context, the purpose of this study is to examine 's aesthetics that 'the spectacle dominating narrative' or 'the narrative as a pretext for showing spectacle,' leading to discussion of artistic/theoretical/critical value and to find out cinematic value of the film being regarded as a failure. In addition, this study is significant in that it suggests that is a new kind of moving image that it cannot be analyzed with existed critical methods of narrative film criticism; as a result, this study provides the chance to be evaluated through a new conceptual frame of the film. In order to grasp the narratological aesthetics, this study focuses on the concept of trickality that Andre Gaudreault suggests, and Tom Gunning's 'the cinema of attractions,' referring to the spectacle-oriented narrativity or the mode of production displaying the spectacle more than the narrative.

• Journal of Distribution Science
• /
• v.10 no.1
• /
• pp.5-10
• /
• 2012

Currently, the rewards programs offered by many companies to strengthen customer relationships have been working quite well. In addition, many companies' rewards programs, designed for stabilizing revenue, are recognized to be effective. However, these rewards programs are not significantly differentiated between companies and there are no accurate conclusions currently, which can be made about their effects. Because of this, a company with a customer rewards program may not comprehend the true level of active participation. In this environment some companies' rewards programs inadvertently hinder business profitability as a side effect while attempting to increase customer loyalty. In fact, airline and oil companies pass on the financial cost of their programs to the customer, and as a result, they have been criticized publicly. The result of this is that the corporations with bad rewards programs tend to get a bad image. In this study of stores' rewards programs, we centered our focus on the design of the program. The main problem in this study is to recognize the financial value of the rewards program and whether it can create a competitive edge for the companies despite the cost issues experienced by them. Customers receiving financial rewards for their business may be just as satisfied with a particular company or store versus those who are not, and the program, perhaps, does not form a distinctive competitive advantage. When the customer is deciding between competing companies to secure their product needs with, we wanted to figure out how much of an affect a valuable reward program had on their decision making. To evaluate this, we set the first hypothesis as, "based on the level of involvement of the customers, there is a difference between customers' preferences for rewards programs." In the results of Experiment 1 we saw that in a financial compensation program for high-involvement groups and low-involvement groups, significant differences appeared and Hypothesis 1 was partially supported. As for the second hypothesis that "customers will have different preferences between a financial rewards programs (SE) and a joint rewards programs (JE)," the analysis showed that the preference for JE was significantly higher than that for other programs. In addition, through Experiment 2, we were able to find meaningful results, which revealed that consumers have shown a significant difference in their preferences between SE and JE. The purpose of these experiments was to enable the designing of a rewards program by learning how to enhance service information distribution and strengthen customer relationships. From the results, there should be a great amount of value for future service-related endeavors and academic research programs. The research is significant, because the results can be found to have a positive effect on reward program designs however, it does have the following limitations. First, this study was performed using an experiment, and all experiments have limitations. Second, although there was an individual evaluation and a joint evaluation, setting a proper evaluation criteria was difficult. In this study, 1,000 Korean won (KRW) in the individual evaluation had a value of 2 points, and, in the joint evaluation, 1,000 KRW had a value of 1 point. There may have been alternative ways to differentiate the evaluations to obtain the proper results. In this study, since there was no funding, the experiments were performed orally however, this was complementary to the study. Third, the subjects who participated in this experiment were students. Conducting this study through experimentation was unavoidable for us, and future research should be conducted using an actual program with the target customers.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.395-402
• /
• 2011

The nanomechanical properties of fully lithiated and unlithiated silicon nanowire deposited on silicon substrate have been studied with atomic force microscopy. Silicon nanowires were synthesized using the vapor-liquid-solid process on stainless steel substrates using Au catalyst. Fully lithiated silicon nanowires were obtained by using the electrochemical method, followed by drop-casting on the silicon substrate. The roughness, derived from a line profile of the surface measured in contact mode atomic force microscopy, has a smaller value ($0.65{\pm}0.05$ nm) for lithiated silicon nanowire and a higher value ($1.72{\pm}0.16$ nm) for unlithiated silicon nanowire. Force spectroscopy was utilitzed to study the influence of lithiation on the tip-surface adhesion force. Lithiated silicon nanowire revealed a smaller value (~15 nN) than that of the Si nanowire substrate (~60 nN) by a factor of two, while the adhesion force of the silicon nanowire is similar to that of the silicon substrate. The elastic local spring constants obtained from the force-distance curve, also shows that the unlithiated silicon nanowire has a relatively smaller value (16.98 N/m) than lithiated silicon nanowire (66.30 N/m) due to the elastically soft amorphous structures. The frictional forces of lithiated and unlithiated silicon nanowire were obtained within the range of 0.5-4.0 Hz and 0.01-200 nN for velocity and load dependency, respectively. We explain the trend of adhesion and modulus in light of the materials properties of silicon and lithiated silicon. The results suggest a useful method for chemical identification of the lithiated region during the charging and discharging process.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.239-250
• /
• 2020

The purpose of this paper is to explore the influence of the "contextualization" effect of web celebrity live broadcast on the e-commerce platform on consumers' perception of product value, risk and purchase intention. Live in this paper, using Taobao shopping consumers as the research object, the survey method, questionnaire survey is adopted, the form through the questionnaire and distributed network, a live in order to further validation of web celebrity effect of contextualized actual influence on consumer purchase intention, questionnaire design the Likert scale, seven and recycling questionnaire analysis using the statistical software SPSS 23.0 and AMOS 22.0 after processing the data. After determining the reliability and validity of the questionnaire, the exploratory factor analysis was used to verify the hypothesis and calculate the actual adjustment degree of the "contextualization" effect of web celebrity live broadcasting on consumers' purchase intention. The research results of this paper are summarized as follows :(1) consumers' perceived value of products can significantly positively affect their purchase intention, while perceived risk has a significantly negative impact on their purchase intention; (2) consumers' trust and purchase intention to products are regulated by the "contextualization" of web celebrity live broadcast. Specifically, for web celebrity live broadcasting with good "contextualization" effect, the perceived value of consumer products has a positive impact on product trust, which is higher than that of web celebrity live broadcasting with poor "contextualization" effect. In terms of resolving consumers' perceived risks to products, web celebrity live broadcast with good "contextualization" effect is also significantly better than web celebrity live broadcast with poor "contextualization" effect. Based on empirical analysis, this paper concludes that web celebrity live broadcasting will become a new breakthrough for the sustainable growth of the e-commerce industry, and puts forward Suggestions on the e-commerce marketing mode and the transformation of web celebrity live broadcasting industry.