• Journal of Life Science
• /
• v.29 no.12
• /
• pp.1408-1414
• /
• 2019

Enzymes are widely used in industrial applications such as detergents, food, feed production, pharmaceuticals and medical applications and major contributors to clean industrial products and processes. To screen, identify, and characterize the enzymes the zymography techniques are routinely used. The zymography technique is a simple, sensitive, and quantifiable technique that is widely used to detect functional enzymes following electrophoretic separation in sodium dodecyl sulfate (SDS)-polyacrylamide gels. The method is a versatile two-stage technique involving protein separation by electrophoresis followed by the detection of enzyme activity in polyacrylamide gels under non-reducing conditions. It is based on SDS-polyacrylamide gel (PAG) copolymerization with substrates, which are degraded by the hydrolytic enzymes restored in enzyme reaction buffer after the electrophoretic separation. Any kind of biological sample can be applied and analyzed on zymography, including culture supernatants of microbes, plants extracts, blood, tissue culture fluids, enzymes in foods extracts and metaproteome. The advantage of zymography is that it is possible to directly detect the protein with activity on the electrophoretic gel as well as confirm the activity at the nanogram level. Thus, this zymography technology can be applied in various fields. However, these advantages are rather disadvantageous and can often lead to experimental errors. In this review, the advantages, disadvantages, and problem solving of zymography technique are described.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.9
• /
• pp.624-629
• /
• 2013

The relation between performance maintenance conditions and those cost efficiency was studied to choose an optimum operating condition in the seawater desalination pretreatment system. A hollow fiber microfiltration module, which was developed with domestic technology, was tested with the various operating conditions such as chemically enhanced backwash cycles and design dosages of a cleaning chemical. Transmembrane pressure was measured to investigate membrane fouling status and cleaning degree. In addition, economic analysis was performed to compare water production costs by the operation condition. As a result, The operation mode III, chemically enhanced backwash at once a day with 100 mg/L of sodium hypochlorite (NaOCl) was selected. The concurrent evaluation between membrane filtration performance and its economic analysis will be suitable to choose an efficient optimum condition.

• Clean Technology
• /
• v.27 no.4
• /
• pp.297-305
• /
• 2021

In the domestic aluminum industry, the extrusion process is a major process accounting for more than 40% of the total production. However, most domestic aluminum extrusion companies produce aluminum using old equipment that is more than 30 years old. Extrusion press is when the equipment is not replaced before the wear and breakage of major parts occur, reducing productivity and increasing the defect rate compared to new equipment. The old extrusion press often loses part drawings, so it is difficult to repair them properly on-site and to remanufacture them due to the lack of technical skills for maintenance. Therefore, a systematic remanufacturing plan must be designed from dismantling the equipment. In this study, remanufacturing FMEA was devised to remanufacture old extrusion press. The risk priority was analyzed by considering the degree of damage to the recycled parts, the cycle due to breakage/damage during the extrusion process, and the value of recycling resources due to remanufacturing. To standardize the remanufacturing process, remanufactured FMEA was performed through part analysis according to the structural analysis of the extrusion press. In addition, remanufacturing priorities were selected for each part, while remanufacturing itself was studied for efficiency of resource circulation and product quality stabilization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.406-418
• /
• 2020

When developing weapons systems, it is important to implement the functions and performance of equipment suitable for development purposes, but it is very important to ensure that the equipment is capable of operating without any vacuum with reliability after development. Therefore, various activities are carried out to enhance reliability of equipment. Reliability is enhanced by using high-specification parts in development, reliability verification through analysis, and testing using development prototypes to reinforce and improve the parts that are lacking in equipment. However, recently, development schedules are shortened due to rapidly changing external conditions and technologies, and there are cases where sufficient reliability growth activities were not carried out due to problems such as cost. Examples are projects that perform reliability activities only in analytical methods (reliability, FMECA). In this paper, analyzing and testing methods for analysis and testing were carried out on the same equipment through FMECA and super-accelerated life test, the contents of reliability growth activity were derived, the results of design change/review were accordingly compared, the differences between the two methods were analyzed, and measures were proposed to strengthen reliable growth activities. It was concluded that reliable growth activities through analysis from the beginning of development and reliable growth activities through testing should be carried out at the completion of initial prototype production.

• Tunnel and Underground Space
• /
• v.29 no.5
• /
• pp.281-291
• /
• 2019

In Overseas case, most tunnels in under are or through the river are constructed with shield TBM and the manufacturer orders of related equipment suitable for the project are mode. Accordingly, the client provides the specifications required for the equipment manufacture. In addition, TBM equipment has been operated by those who have completed the expert training program, which for minimizing the risk of equipment operation in construction field corresponding to the mechanized construction. However, in Korea, such a system related to above the program and specifications has not yet been built, which is causing a lot of difficulties in construction field. Therefore, this study investigated the differences in bidding guides provided by mechanized construction in domestic and abroad, and the professional education programs for expert training being conducted from overseas. Futhermore, we will propose the guidelines of essential equipment specification contained in domestic bidding and provide the necessary manual for the professional education program for TBM as the mechanized construction method.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.2
• /
• pp.93-103
• /
• 1981

It is well-known that nowadays heat resisting and anti-corrosive materials have been widely used as the components materials of gas turbines, nuclear power plants and engines etc. In the fields of machine production industry. And materials for engine components, like as the exhaust valve of internal combustion engine, have been required to operate under the high temperature range of $700^{\circ}C$-$800^{\circ}C$ and high pressured gas with repeated mechanical load for the high performance of engines. For these components, friction welding for bonding of dissimilar steels can be applied for in order to obtain process shortening, production cost reduction and excellent bonding quality. And age hardening recently has been noticed to the heat resisting materials for further strengthening of high temperature strength, especially high temperature fatigue strength. However, it is difficult to find out any report concerning the effects of age hardening for strengthening high temperature fatigue strength to the Friction welded heat resisting and anti-corrosive materials. In this study the experiment was carried out as the high temperature rotary bending fatigue testing under the condition of $700^{\circ}C$ high temperature to the friction welded domestic heat resisting steels, SUH3-SUS303, which were 10hr., 100hr. aging heat treated at $700^{\circ}C$ after solution treatment 1hr. at $1, 060^{\circ}C$ for the purpose of observing the effects of the high temperature fatigue strength and fatigue fracture behaviors as well as with various mechanical properties of welded joints. The results obtained are summarized as follows: 1) Through mechanical tests and micro-structural examinations, the determined optimum welding conditions, rotating speed 2420 rpm, heating pressure 8kg/mm super(2), upsetting pressure 22kg/mm super(2), the amount of total upset 7mm (heating time 3 sec and upsetting time 2 sec) were satisfied. 2) The solution treated material SUH 3, SUS 303, have the highest inclination gradient on S-N curve due to the high temperature fatigue testing for long time at $700^{\circ}C$. 3) The optimum aging time of friction welded SUH3-SUS 303, has been recognized near the 10hr. at $700^{\circ}C$ after the solution treatment of 1hr. at $1, 060^{\circ}C$. 4) The high temperature fatigue limits of aging treated materials were compared with those of raw material according to the extender of aging time, on 10hr. aging, fatigue limits were increased by SUH 3 75.4%, SUS 303 28.5%, friction welded joints SUH 3-SUS 303 44.2% and 100hr. aging the rates were 64.9%, 30.4% and 36.6% respectively. 5) The fatigue fractures occurred at the side of the base matal SUS303 of the friction welded joints SUH 3-SUS 303 and it is difficult to find out fractures at the friction welding interfaces. 6) The cracking mode of SUS 303, SUH 3-303 is intergranular in any case, but SUH 3 is fractured by transgranular cracking.

• Herbal Formula Science
• /
• v.31 no.1
• /
• pp.1-10
• /
• 2023

Objectives : The main aim of this study was to examine the LC-MS/MS used to identify phenolic compounds of CRE(Coptidis Rhizoma 70% EtOH Extract). Also, we investigated antioxidative activities and Anti-inflammatory activities. Methods : LC-MS/MS Analysis HPLC and LC-MS/MS were performed on a 1260 series HPLC system (Agilent Technologies, Inc., California, USA) and 3200 QTrap tandem mass system (Sciex LLC) operated in positive ion mode (spray voltage set at -4.5 kV). The solvent used was DW and Acetonitrile containing 0.1% formic acid, a gradient system was used at a flow rate of 0.5 mL/min for analysis, and a Prontosil C18 column (length, 250 mm; inner diameter, 4.6 mm; particle size, 5 ㎛; Phenomenex Co., Ltd., California, USA, Biochoff Chromatography) was used. The solvent conditions used in the mobile phases were 0-10 min at 10-15% B, 10-20 min at 20% B, 20-30 min at 25%, 30-40 min at 40%, 40-50 min at 70%, 50-60 min at 95%, and 60-70 min at 95%. The analysis was performed at a wavelength of 284 nm and a temperature of 35℃. The cell viability was measured using a 3-(4,5-dimethyethiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity. We examined the effects of CRE on the lipopolysaccharide (LPS)-induced production of nitric oxide (NO) in a RAW 264.7 cells Results : The chemical analysis CRE by Liquid chromatography-tandem mass spectrometry (LC-MS/MS) confirmed that Rosmarinic acid, Ferrulic acid, 3-O-feruloylquinic acid, and 5-O-feruloylquinic acid as phenolic components. DPPH radical scavenging activity was the inhibitory activity of CRE showed at 200 ㎍/mL a statistically significant level. MTT assay demonstrated that the CRE did not have a cytotoxic effect in RAW 264.7 and LPS-induced RAW264.7 cells. Also, CRE reduced NO production in RAW 264.7 cells stimulated with LPS. Conclusions : Based on these findings, The chemical analysis 4 major components CRE such as Rosmarinic acid, Ferrulic acid, 3-O-feruloylquinic acid, and 5-O-feruloylquinic acid. Moreover, we confirmed that CRE has effects antioxidant and anti-inflammatory. The results demonstrate that CRE can be used as an antioxidant and a powerful chemopreventive ingredient against inflammatory diseases.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.7
• /
• pp.1125-1132
• /
• 2013

In the kimchi manufacturing process, the starter is cultured on a large-scale and needs to be supplied at a low price to kimchi factories. However, current high costs associated with the culture of lactic acid bacteria for the starter, have led to rising kimchi prices. To solve this problem, the development of a new medium for culturing lactic acid bacteria was studied. The base materials of a this novel medium consisted of Chinese cabbage extract, a carbon source, a nitrogen source, and inorganic salts. The optimal composition of this medium was determined to be 30% Chinese cabbage extract, 2% maltose, 0.25% yeast extract, and $2{\times}$ salt stock (2% sodium acetate trihydrate, 0.8% disodium hydrogen phosphate, 0.8% sodium citrate, 0.8% ammonium sulfate, 0.04% magnesium sulfate, 0.02% manganese sulfate). The newly developed medium was named MFL (medium for lactic acid bacteria). After culture for 24 hr at $30^{\circ}C$, the CFU/mL of Leuconostoc (Leuc.) citreum GR1 in MRS and MFL was $3.41{\times}10^9$ and $7.49{\times}10^9$, respectively. The number of cells in the MFL medium was 2.2 times higher than their number in the MRS media. In a scale-up process using this optimized medium, the fermentation conditions for Leuc. citreum GR1 were tested in a 2 L working volume using a 5 L jar fermentor at $30^{\circ}C$. At an impeller speed of 50 rpm (without pH control), the viable cell count was $8.60{\times}10^9$ CFU/mL. From studies on pH-stat control fermentation, the optimal pH and regulating agent was determined to be 6.8 and NaOH, respectively. At an impeller speed of 50 rpm with pH control, the viable cell count was $11.42{\times}10^9(1.14{\times}10^{10})$ CFU/mL after cultivation for 20 hr - a value was 3.34 times higher than that obtained using the MRS media in biomass production. This MFL media is expected to have economic advantages for the cultivation of Leuc. citreum GR1 as a starter for kimchi production.

• (The) Research of the performance art and culture
• /
• no.18
• /
• pp.257-282
• /
• 2009

Le $th{\acute{e}}{\hat{t}}re$ musical en $Cor{\acute{e}}e$ est devenu aujourd'hui une mode. Beaucoup parlent de musical, mais beaucoup de musicals sont $mont{\acute{e}}s$ sur la $sc{\grave{e}}ne$ sans des recherches $n{\acute{e}}cessaires$ suffisantes. C'est pour cette raison que la plupart des spectacles musicaux qui sont $cr{\acute{e}}es$ en $Cor{\acute{e}}e$ sont $destin{\acute{e}}s$ en faillite $d{\grave{e}}s$ la naissance. D'ailleurs les musicals $liscenci{\acute{e}}s$ par $l^{\prime}Am{\acute{e}}rique$, la France qui sont $mont{\acute{e}}s$ sur la $sc{\grave{e}}ne$ de $Cor{\acute{e}}e$ aujourd'hui sont assez pour nuire le $march{\acute{e}}$ $cor{\acute{e}}en$ $constitu{\acute{e}}$ autour de musical. Quels sont donc les $probl{\grave{e}}mes$ que posent les musicals $liscenci{\acute{e}}s$? $Premi{\grave{e}}rement$ ils encouragent la mime, pas la $cr{\acute{e}}ation$. En d'autre terme, les musicals $liscenci{\acute{e}}s$ que les $Cor{\acute{e}}ens$ montent sur la $sc{\grave{e}}ne$ ne sont pas les $cr{\acute{e}}ations$ propres chez les $Cor{\acute{e}}ens$, par contre, ces derniers sont $demand{\acute{e}}s$ de suivre ${\grave{a}}$ la mot les indications $dict{\acute{e}}es$ par le droit d'auteur. Les $cr{\acute{e}}ateurs$ $cor{\acute{e}}ens$ ne sont pas libres de $cr{\acute{e}}ation$. $Deuxi{\grave{e}}mement$ les musicals ${\grave{a}}$ la mode ont pouvoir de $d{\acute{e}}truire$ la $diversit{\acute{e}}$ de l'homme. L'homme se $caract{\grave{e}}rise$ par la $diversit{\acute{e}}$ et se $diff{\grave{e}}re$ l'un par rapport ${\grave{a}}$ l'autre. C'est l'essence de l'homme. Tous sont $diff{\acute{e}}rents$. Pourtant le musical qui $r{\grave{e}}gne$ sur tous genres de spectacles d'aujourd'hui de $Cor{\acute{e}}e$ ne laisse pas vivre d'autres genres de spectacles, la danse, le $th{\acute{e}}{\hat{a}}tre$, etc. Seul le musical est $compt{\acute{e}}$. $Troisi{\grave{e}}mement$ le musical ne peut pas nier $compl{\grave{e}}tement$ son origine commerciale. En fait le musical est devenu une chose important depuis des investigations immenses par le gouvernement $d^{\prime}Am{\acute{e}}rique$ pour donner des travails aux gens. Donc, $d{\grave{e}}s$ le $d{\acute{e}}but$, il n'y avait pas de $consid{\acute{e}}rations$ artistiques dans et sur le musical. Comme c'est par le commerce que le musical est $r{\acute{e}}pandu$, s'il y aura un $probl{\grave{e}}me$ quelconque, il est $tr{\grave{e}}s$ possible qu'on cherche ${\grave{a}}$ $r{\acute{e}}soudre$ le $probl{\grave{e}}me$ par la vue de commerce. En comprenant les $probl{\grave{e}}mes$ $mentionn{\acute{e}}s$ $l{\grave{a}}$-dessus, il faut $pr{\acute{e}}parer$ le changement de $march{\acute{e}}$ $cor{\acute{e}}enne$ de musical. Le moyen le plus $su{\hat{r}}$ de se $pr{\acute{e}}parer$ est de trouver la $r{\acute{e}}solution$ dans la culture. Pourtant cette $derni{\grave{e}}re$ ne signifie pas la tradition comme $c^{\prime}{\acute{e}}tait$ le cas $jusqu^{\prime}{\grave{a}}$ aujourd'hui, car les $Cor{\acute{e}}ens$ ne sont pas ${\acute{e}}duqu{\acute{e}}s$ par cette $derni{\grave{e}}re$. La $modernit{\acute{e}}$, disons occidentale, traverse la $Cor{\acute{e}}e$. Donc, la signification du mot 'culture' doit ${\hat{e}}tre$ $bas{\acute{e}}e$ sur la tradition et la $modernit{\acute{e}}$ en $m{\hat{e}}me$ temps.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.1
• /
• pp.40-46
• /
• 2013

The isotope ratios of $^{13}C/^{12}C$ and $^{18}O/^{16}O$ for a sample in a mass spectrometer are measured relative to those of a pure $CO_2$ reference gas (i.e., laboratory working standard). Thus, the calibration of a laboratory working standard gas to the international isotope scales (Pee Dee Belemnite (PDB) for ${\delta}^{13}C$ and Vienna Standard Mean Ocean Water (V-SMOW) for ${\delta}^{18}O$) is essential for comparisons between data sets obtained by other groups on other mass spectrometers. However, one often finds difficulties in getting well-calibrated standard gases, because of their production time and high price. Additional difficulty is that fractionation processes can occur inside the gas cylinder most likely due to pressure drop in long-term use. Therefore, studies on laboratory production of pure $CO_2$ isotope standard gas from stable solid calcium carbonate standard materials, have been performed. For this study, we propose a method to extract pure $CO_2$ gas without isotope fractionation from a solid calcium carbonate material. The method is similar to that suggested by Coplen et al., (1983), but is better optimized particularly to make a large amount of pure $CO_2$ gas from calcium carbonate material. The $CaCO_3$ releases $CO_2$ in reaction with 100% pure phosphoric acid at $25^{\circ}C$ in a custom designed, evacuated reaction vessel. Here we introduce optimal procedure, reaction conditions, and samples/reactants size for calcium carbonate-phosphoric acid reaction and also provide the details for extracting, purifying and collecting $CO_2$ gas out of the reaction vessel. The measurements for ${\delta}^{18}O$ and ${\delta}^{13}C$ of $CO_2$ were performed at Seoul National University using a stable isotope ratio mass spectrometer (VG Isotech, SIRA Series II) operated in dual-inlet mode. The entire analysis precisions for ${\delta}^{18}O$ and ${\delta}^{13}C$ were evaluated based on the standard deviations of multiple measurements on 15 separate samples of purified $CO_2$. The pure $CO_2$ samples were taken from 100-mg aliquots of a solid calcium carbonate (Solenhofen-ori $CaCO_3$) during 8-day experimental period. The multiple measurements yielded the $1{\sigma}$ precisions of ${\pm}0.01$‰ for ${\delta}^{13}C$ and ${\pm}0.05$‰ for ${\delta}^{18}O$, comparable to the internal instrumental precisions of SIRA. Therefore, we conclude the method proposed in this study can serve as a way to produce an accurate secondary and/or laboratory $CO_2$ standard gas. We hope this study helps resolve difficulties in placing a laboratory working standard onto the international isotope scales and does make accurate comparisons with other data sets from other groups.