• Journal of Science and Technology Studies
• /
• v.19 no.1
• /
• pp.137-179
• /
• 2019

This paper aims to uncover and discuss characteristics of citizen participatory transdisciplinary research which has been gaining momentum in recent years in the form of social-problem solving R&D program and sustainability science research. Two key questions are examined. One is related to the mechanism of cooperation in knowledge production among participants, namely scientists and citizens(extra-academics), while the other is examining whether the output of participatory research activity is more than journals or patents. Diverse strands of literature on knowledge and knowledge production including Mode 2, Learning modes and the notion of co-production of knowledge and social order are drawn and critically reviewed to elucidate the characteristics of citizen participatory transdisciplinary research.

• Journal of Hydrogen and New Energy
• /
• v.21 no.6
• /
• pp.580-586
• /
• 2010

Acid and alkali pretreatments were applied to tofu processing waste (TPW) to increase the solubility of ingredients in TPW. Pretreatment at 1.0% of HCl and 2.5% of NaOH condition resulted in the increase of SCOD concentration from 3.2 g COD/L to 27 g COD/L and 33 g COD/L, respectively. The acid and alkali-pretreated TPW was studied for its fermentative $H_2$ production capacity in batch mode using a thermophillic mixed culture. Alkali pretreatment on presence of 2.5% NaOH exhibited more soluble portion released compared to acid pretreatment using HCl, however the $H_2$ production from acid pretreated TPW was better than alkali-pretreated TPW probably due to the sodium inhibition on microbial activity. In addition, sewage sludge was externally added to the acid-pretreated (1.0% HCl) TPW by 20% (on volume basis). Average H2 production rate was increased from 31 to 78 ml/L-broth/hr, and it was attributed to the high buffer capacity and abundant nutrients especially divalent cation in sewage sludge.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.56-65
• /
• 2019

Recently, automobiles have been developed for safety and environmental reasons. Particularly, awareness of automobile safety is changing significantly. As a result, safety systems developed by ADAS have emerged. However, the period of mass production through ADAS development and test evaluation is long. Therefore, in this paper, we develop a brake dynamometer to shorten the time required for ADAS development and test evaluation. In addition, the developed brake dynamometer satisfies the international standard JIS D-0210, and the user can evaluate the braking force by selecting test conditions and test method for each mode of ADAS. We use the ACC, LKAS, and AEB scenarios proposed in previous studies to verify the reliability of the developed brake dynamometer. The developed brake dynamometer was verified by comparing the test values and the calculated values using theoretical formulas of the proposed ADAS mode based on previous studies. In addition, it is expected that the performance evaluation of brake parts for each ADAS mode will be possible in an environment where the vehicle test of ADAS is not possible in the future.

• Journal of Wetlands Research
• /
• v.15 no.2
• /
• pp.165-170
• /
• 2013

Pilot scale study was carried out to produce Volatile Fatty Acids with primary sludge from municipal wastewater treatment plant. An acid fermenter was operated at pH 9, $35^{\circ}C$, SRT of 3.5-4.25d, using a final effluent as elutriating water(Mode-I) and pH 9, SRT 5d, temperature of $35^{\circ}C$(Mode-II), $55^{\circ}C$(Mode-III), using a primarily treated water as elutriating water. Although solubilization rate was enhanced with the increase of temperature, the VFAs production rate was decreased. The VS reduction was shown approximately 56%, and the sludge volume reduction was 93%. The optimal conditions for solubilization was obtained at pH 9, $35^{\circ}C$ and SRT of 5d.

• Microbiology and Biotechnology Letters
• /
• v.15 no.6
• /
• pp.430-435
• /
• 1987

A chitin-immobilized enzyme amyloglucosidase(AMG) and a bacterium Zymomonas mobilis were coentrapped in alginate gel beads. Ethanol production was performed in a packed bed column reactor in a simultaneous saccharification and fermentation(SSF) mode using liquefied sago starch as a substrate. It was found that this process eliminated product inhibition and reverse reaction of glucose enhancing the rate of saccharification and ethanol production. At a low dilution rate of D = 0.11 hr$^{-1}$, the steady-state ethanol concentration was 46.0g/$m\ell$ (96.8 % of theoretical yield). The maximum ethanol productivity was 17.7g/$m\ell$, h at D = 0.83 hr$^{-1}$ when the calculation was based on the total working volume. The continuous production of ethanol was maintained stably over 40 days without problems in this reactor system.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.265-274
• /
• 2017

For accurate demand forecasting of railway logistics, we estimated intercity freight mode choice models based on the binary logit model and using production-consumption data from the Korea Transport Database. We estimated two types of models and compared the results by major item of railway logistics, such as container, cement, and steel: 1) The aggregate freight mode choice models are based on the revealed preference (RP) data and 2) The disaggregate models are based on the stated preference (SP) data. With respect to the container, the travel time variable was found to be statistically significant; however, the travel cost variable was not statistically significant in the RP model, while the travel cost variable was statistically significant in the SP model. For cement and steel, the travel cost variables were statistically significant but the travel time variables were not statistically significant in either the RP or the SP models. These results are inconsistent with results from previous studies based on SP data, which showed that the travel time variables were significant. Consequently, it can be concluded that the travel time factor should be considered in container transport, but that this factor is negligible for cement and steel transport.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.141-145
• /
• 2008

When the current flows to parallel lines with different length, it is researched that the radiation is occured by the common-mode current radiates, and the small light weight antenna composed of dual elements by using the principle is proposed. However, there is a problem in production about this antenna because this liner antenna is structured by combining with wires. In this paper, we improved this liner antenna, and designed the plane antenna composed of dual elements with different length in the plane printed board to produce and to design easily. Furthermore, the antenna with the wide-band characteristic is also designed in the same board. The radiation pattern is similar to the dipole antenna on account of designing the triangular patch S, the notch and two tapers in patch S, the notch and two tapers in the antenna element. In result, it was able to design the antenna working wider band-width(the bandwidth ratio about 58%, $VSWR{\le}2$).

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.10
• /
• pp.1379-1383
• /
• 2006

A total of 6,804 records for Duroc breed were collected from three farms registered at the Korean Animal Improvement Association (KAIA) from 1998 to 2004 of which both records from two ultrasound modes (A and B) were analyzed to estimate the variance components of carcass traits. Three carcass traits backfat thickness (bf), loin eye muscle area (lma) and lean meat percentage (lmp) were measured. These traits were analyzed separately as bf1, lma1 and lmp1 for ultrasound mode A and bf2, lma2 and lmp2 for ultrasound mode B with multiple trait animal model by using MTDFREML (Boldman et al., 1993). All the traits revealed medium heritability values. Estimated heritabilities for bf1, bf2, lma1, lma2, lmp1 and lmp2 were 0.45, 0.39, 0.32, 0.25, 0.28 and 0.39, respectively. Estimated genetic correlations for traits bf1 and bf2, lma1 and lma2, lmp1 and lmp2 were positive but low. Specifically, genetic correlations between bf1 and bf2 was 0.30 while the estimates for lean traits between lma1 and lma2 and between lmp1 and lmp2 were 0.15 and 0.18, respectively. Conversely, high negative genetic correlations existed between bf1 and the lean traits lma2, lmp2. Likewise, the estimated genetic correlations between lma1 and lma2 and lmp1 and lmp2 were low.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.655-662
• /
• 2018

To respond effectively to climate change following the launch of the new climate system, the government is seeking to expand the use of distributed power resources. Among them, the district heating system centered on Combined Heat and Power (CHP) is accepted as the most realistic alternative. On the other hand, the government recently announced the change of energy paradigm focusing on eco-friendly power generation from the base power generation through $8^{th}$ Basic Plan for Long-term Electricity Supply and Demand(BPE). In this study, we analyzed the quantitative effects of profit and loss on the CHP operating business by changing patterns of the heat production, caused by the change of energy paradigm. To do this, the power market long-term simulation was carried out according to the $7^{th}$ and $8^{th}$ BPE respectively, using the commercialized power market integrated analysis program. In addition, the CHP operating model is organized to calculate the power and heat production level for each CHP operation mode by utilizing the operating performance of 830MW class CHP in Seoul metropolitan area. Based on this, the operation optimization is performed for realizing the maximum operating profit and loss during the life-cycle of CHP through the commercialized integrated energy optimization program. As a result, it can be seen that the change of the energy paradigm of the government increased the level of the ordered power supply by Korean Power Exchange(KPX), decreased the cost of the heat production, and increased the operating contribution margin by 90.9 billion won for the 30 years.

• Animal Bioscience
• /
• v.37 no.1
• /
• pp.1-15
• /
• 2024

Poultry coccidiosis is an intestinal infection caused by an intracellular parasitic protozoan of the genus Eimeria. Coccidia-induced gastrointestinal inflammation results in large economic losses, hence finding methods to decrease its prevalence is critical for industry participants and academic researchers. It has been demonstrated that coccidiosis can be effectively controlled and managed by employing anticoccidial chemical compounds. However, as a result of their extensive use, anticoccidial drug resistance in Eimeria species has raised concerns. Phytochemical/herbal medicines (Artemisia annua, Bidens pilosa, and garlic) seem to be a promising strategy for preventing coccidiosis, in accordance with the "anticoccidial chemical-free" standards. The impact of herbal supplements on poultry coccidiosis is based on the reduction of oocyst output by preventing the proliferation and growth of Eimeria species in chicken gastrointestinal tissues and lowering intestinal permeability via increased epithelial turnover. This review provides a thorough up-to-date assessment of the state of the art and technologies in the prevention and treatment of coccidiosis in chickens, including the most used phytochemical medications, their mode of action, and the applicable legal framework in the European Union.