• Journal of Information Processing Systems
• /
• 제11권2호
• /
• pp.266-279
• /
• 2015

In this paper, we propose a novel block cipher mode of operation, which is known as the counter chain (CC) mode. The proposed CC mode integrates the cipher block chaining (CBC) block cipher mode of operation with the counter (CTR) mode in a consistent fashion. In the CC mode, the confidentiality and authenticity of data are assured by the CBC mode, while speed is achieved through the CTR mode. The proposed mode of operation overcomes the parallelization deficiency of the CBC mode and the chaining dependency of the counter mode. Experimental results indicate that the proposed CC mode achieves the encryption speed of the CTR mode, which is exceptionally faster than the encryption speed of the CBC mode. Moreover, our proposed CC mode provides better security over the CBC mode. In summary, the proposed CC block cipher mode of operation takes the advantages of both the Counter mode and the CBC mode, while avoiding their shortcomings.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.73-80
• /
• 2016

The preliminary test for the dual mode plasma torch system was carried out to explore the operation properties in advance. The dual mode plasma torch system that is able to operate in transferred, non-transferred, or dual mode is very adequate for melting the mixed wastes including nonconductive materials such as concrete, asbestos, etc. since it exploits both the high efficiency of heat transfer to the melt in transferred mode and stable operation in non-transferred mode. Also, system operation including restarting is reliable and very easy. A stationary melter with a refractory structure was designed and manufactured considering the melting behavior of slags to minimize the refractory erosion. The power supply for the dual mode plasma torch system built with high power insulated gate bipolar transistor (IGBT) modules has functions for both current control and voltage control and is sufficient to suppress the harmonics during the operation of the plasma torch. The power supply provides two different voltages for transferred operation and non-transferred. It is confirmed that the operation voltage in transferred is always higher than non-transferred. The dual mode plasma torch system was successfully developed and is under operation for a melting experiment to optimize operation data.

• 정보보호학회논문지
• /
• 제32권2호
• /
• pp.163-170
• /
• 2022

LEA는 2013년 국내에서 개발된 경량 블록암호이다. 본 논문에서는 블록 암호 운용 방식 중 CTR 운용 모드와 CTR 운용 모드를 활용하며 기밀성과 무결성을 제공하는 GCM 운용 모드의 구현을 진행한다. LEA-CTR의 최적화 구현은 CTR 운용 모드의 고정된 Nonce 값의 특성을 활용하여 사전 연산을 통한 연산 생략과 State 고정을 통해 State 간의 이동을 생략한 최적화 구현을 제안한다. 또한 제안 기법을 GCM 운용 모드에 적용 가능함을 보여주며, Galois Field(2¹²⁸) 곱셈 연산을 사용하는 GHASH 함수 구현을 통해 GCM 구현을 진행한다. 결과적으로 32-bit RISC-V상에서 제안하는 기법을 적용한 LEA-CTR의 경우 기존 연구 대비 2%의 성능 향상을 확인하였으며, 추후 다른 연구에서 성능 지표로 사용될 수 있도록 GCM 운용 모드의 성능을 제시한다.

• 대한인간공학회지
• /
• 제7권2호
• /
• pp.31-44
• /
• 1988

If an error occurs in the automatic mode when the advanced teleoperator system performs a task in hostile environment then the automatic mode changes into the manual mode. The operation by the control program and the operation by a human recover the error in the manual mode. The system resumes the automatic mode and continues the given task. It is necessary to improve the manual mode in order to make the best use of a man-robot system, as a part of the human interface technique. Therefore, the error recovery task is performed by combining the operation by the control program representing autonomy of a robot and the operation by a human representing versatility of a human operator effectively in the view point of human factors engineering. The geometric inverse kinematics is used for the calculation of the robot joint values in the operation by the control program. The singularity operation error and the parameter operation error often occur in this procedure. These two operation errors increase the movement time of the robot and the coordinate reading time, during the error recovery task. A singularity algorithm, parameter algorithm and fuzzy control are studied so as to remove the disadvantages of geometric inverse kinematics. And the geometric straight line motion is studied so as to improve the disadvantages of the operation by a human.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1132-1137
• /
• 2008

Automatic Operation based on ATO (Automatic Train Operation) is necessary for driverless Light Rail Transit business. When this kind of driverless LRT operation plan is made, TPS (Train Performance Simulation) is traditionally simulated at all-out mode and coasting mode based on manual operation. Commercial schedule speed equals to all-out speed minus $9{\sim}15%$ make-up margin. Coasting mode TPS simulation is also run at commercial schedule speed to calculate run time and energy consumption. But TPS based on manual operation should make an improvement on accuracy in case of driverless LRT operation Plan. In this paper, new fast mode TPS simulation using ATO pattern is proposed and show near actual ATO result. The actual ATO pattern can be accurately simulated with the introduction of 4 parameters such as commercial braking rate, jerk, station stop profile and grade converted distance. Normal mode TPS simulation for commercial schedule speed can be designed to have fast mode trip time plus 3 seconds/km margin recommended by korean standard LRT specification.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.83.1-83.1
• /
• 2010

A Dead-end mode operation is one of the best way to maximize the gas usage rate. But, some components of fuel cell stack like gas diffusion layer(GDL) or membrane can be damaged in dead-end mode operation. In this study, a Large Scale Polymer electrolyte membrane fuel cell(PEMFC) for a dead-end operation has been developed. The stack is composed with 4 cells which has over 400cm2 of active area. Hydrogen is used as a fuel, and oxygen is used as a oxidant. The dead-end operation performance was evaluated by a long-term dead-end mode operation. The fuel cell stack is operated over 1,500 hours in dead-end mode operating fuel cell test station. And the performance change of the fuel cell stack was investigated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권7호
• /
• pp.3608-3628
• /
• 2017

Several block cipher modes of operation have been proposed in the literature to protect sensitive information. However, different security analysis models have been presented for attacking them. The analysis indicated that most of the current modes of operation are vulnerable to several attacks such as known plaintext and chosen plaintext/cipher-text attacks. Therefore, this paper proposes a secure block cipher mode of operation to thwart such attacks. In general, the proposed mode combines one-time chain keys with each plaintext before its encryption. The challenge of the proposed mode is the generation of the chain keys. The proposed mode employs the logistic map together with a nonce to dynamically generate a unique set of chain keys for every plaintext. Utilizing the logistic map assures the dynamic behavior while employing the nonce guarantees the uniqueness of the chain keys even if the same message is encrypted again. In this way, the proposed mode called SPCBC can resist the most powerful attacks including the known plaintext and chosen plaintext/cipher-text attacks. In addition, the SPCBC mode improves encryption time performance through supporting parallelized implementation. Finally, the security analysis and experimental results demonstrate that the proposed mode is robust compared to the current modes of operation.

• 국제지역연구
• /
• 제22권1호
• /
• pp.61-78
• /
• 2018

해외직접투자에서 자회사 운영방식은 크게 수평적 자회사와 수직적 자회사로 구분할 수 있다. 이와 같은 자회사의 운영방식은 진출국의 제도에 따라 차이를 보인다. 본 연구는 제도이론관점에서 국내 전기전자 및 자동차산업의 해외직접투자 기업을 대상으로 진출국 공식적, 비공식적 제도가 해외 자회사 운영 방식선택에 미치는 영향을 실증 분석하였다. 실증분석결과, 진출국 정치적 위험정도가 낮을수록, 문화적 차이가 클수록 수직적 자회사를 선택하는 것으로 나타났다. 반면에 진출국 부패지수가 낮을수록, 경제자유도가 높을수록 수평적 자회사를 선택하는 것으로 나타났다.

• 공업화학
• /
• 제16권2호
• /
• pp.217-225
• /
• 2005

H사의 유로변경식 고도하수처리 공법의 제어 변수가 DO와 수온 등으로 한정되어 있어 효율성의 만족도를 충족시켜주지 못하는 현재의 상황을 개선하고자 세 가지 개선방향을 설정하여 Simulation을 통한 Operation Data의 분석 및 장치구성과 실험을 통한 최적제어 Logic을 연구하여 이를 다시 S하수처리장에 설치 적용한 결과이다. 본 실험을 통해서 수온과 유량에 근간한 Operation Mode 변경의 최적화와 이를 통한 동력비 절감을 이루었고 암모니아성 질소의 농도에 따른 Operation Mode의 변경에서 일반 Normal Mode와 병행하여 Save Mode를 새로 적용하여 동력비 절감을 이루었다. 또한 DO 값을 송풍량과 수중폭기기의 교반속도에 의해 비례제어하고 유출수의 암모니아 농도에 따라 DO 값을 제어하여 안정적인 질산화를 이루었다. 이러한 결과는 공정효율의 극대화와 운영 및 유지관리비의 절감을 이루었다.

• 전기학회논문지
• /
• 제62권2호
• /
• pp.201-207
• /
• 2013

This paper propose seamless transfer operation between grid-connected and stand-alone mode in the three-phase inverter for microgrid. The inverter operates grid-connected mode and stand-alone mode. Grid-connected mode is the inverter connected to grid and stand-alone mode is to deliver energy to the load from inverter at grid fault. When conversion from gird-connected to stand-alone mode, the inverter changes current control to voltage control. When grid restored, the inverter system is conversion from stand-alone to grid-connected mode. In this case, load phase and grid phase are different. Therefore, synchronization is essential. Thus Seamless transfer operation stand-alone to grid-connected mode. In this paper, propose sealmless transfer operation between grid-connceted and stand-alome mode, and this method is verified through simulation and experiment.