• 한국자기공명학회논문지
• /
• 제10권1호
• /
• pp.59-73
• /
• 2006

Spin-lattice relaxation pathway of $CH_2$ spin system by two dimensional NOESY sequence has been discussed. Two-dimensional spectra governed by dipolar relaxation mechanism were simulated in term of transfer mode, the generalization of conventionally used magnetization mode in one dimension. The transfer matrix directly related to the Redfield relaxation matrix can be constructed by the multiplet of transfer mode. The observable relaxation transfer modes causes to variation of the off-diagonal signal intensity of phase sensitive NOESY spectra from which variable spectral density can be extracted with simple group theoretical calculation. The variation of the J-coupling peak intensity as a function of the mixing time in 2-D spectra for $n-Undecane-5-^{13}C$ and Bromoacetic $2-^{13}C$ acid has been theoretically traced.

• 조명전기설비학회논문지
• /
• 제28권12호
• /
• pp.108-115
• /
• 2014

Recently, Uninterruptible power supply(UPS) is spotlighted from concern about black out, due to reserve power problem caused by increased power consumption. When fault occurs on the grid, UPS system supplies power to loads instead of the grid. Also, it is an advantage of possible operation as Energy storage system(ESS). Bi-directional power control of AC/DC Pulse width modulation(PWM) converter is essential for grid-connected UPS system. And, mode transfer control has to be performed considering phase and dynamic characteristic under grid condition. In this paper, control of mode transfer and bi-directional power control of AC/DC PWM converter is proposed for UPS system. Also, it is verified by simulation and experimental results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.273-276
• /
• 1998

This paper proposes a new Asynchronous Transfer Mode(ATM) switch architecture for the Broadband ISDN. The proposed switch has the architecture to prohibit the out-of-sequence in shared buffer switch system with being fixed buffer size in the out-buffered large scale ATM Switch System. then in this paper proposes cell resequence algorithm to decrease the out-of-sequence problem. also, we studied the out-of-sequence problem that was occurred by the cell transfer delay and the cell overflow due to the fixed buffer size when cell resequenced and we propose to implement optimal ACFIFO(Address Counter First In First Out) buffer size which has the minimized cell loss.

• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.1982-1992
• /
• 1999

This paper presents a novel concept of cargo handling system adapted for a sea port subjected to severe time-varying tide. The proposed system can perform loading or unloading by using a sort of hydraulic elevator associated with real-time position control. In order to achieve a proof-of-concept, a small-sized laboratory model of the cargo handling system is designed and built. The model consists of three principal components container palette transfer (CPT) car, platform with lifting columns, and cargo ship. The platform activated by electro-rheological (ER) valve-cylinders is actively controlled to track the position of the cargo ship subjected to be varied due to the time-varying tide and wave motion. Following the derivation of the dynamic model for the platform and cargo ship motions, an appropriate control scheme is formulated and implemented. The location of the CPT car is sensed by a set of photoelectric switches and controlled via sequence controller. On the other hand, a sliding mode controller (SMC) is adopted as the position controller for the platform. Both simulated and measured control results are presented to demonstrate the effectiveness of the proposed cargo system.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권3호
• /
• pp.40-45
• /
• 2009

Many superconductor applications such as MRI and SMES must be operated in persistent current mode to eliminate the electrical ohmic loss. This paper presents the characteristic analysis of the high temperature superconducting (HTS) power supply made of YBCO coated conductor (CC). In this research, we have manufactured the HTS power supply to charge the 0.73 mH HTS double-pancake magnet made of YBCO CC. Among the all design parameters, the heater triggerring time and magnet applying time were the most important factors for the best performance of the HTS power supply. In this paper, three-dimensional simulation through finite element method (FEM) was used to study the heat transfer in YBCO CC and the magnetic field of the magnetic circuit. Based upon these results, the final operational sequence could be determined to generate the pumping current. In the experiment, the maximum pumping current reached about 16 A.

• 한국경영과학회지
• /
• 제21권1호
• /
• pp.1-17
• /
• 1996

There have been considerable researches for solving large-scale separable convex optimization ptoblems. In this paper we present a method for large-scale nonseparable smooth convex optimization problems with block-angular linear constraints. One of them is occurred in reconfiguration of the virtual path network which finds the routing path and assigns the bandwidth of the path for each traffic class in ATM (Asynchronous Transfer Mode) network [1]. The solution is approximated by solving a sequence of the block-angular structured separable quadratic programming problems. Bundle-based decomposition method [10, 11, 12]is applied to each large-scale separable quadratic programming problem. We implement the method and present some computational experiences.

• Steel and Composite Structures
• /
• 제22권6호
• /
• pp.1359-1389
• /
• 2016

Buckling and free vibration behavior of a laminated cylindrical panel exposed to non-uniform thermal load is addressed in the present study. The approach comprises of three portions, in the first portion, heat transfer analysis is carried out to compute the non-uniform temperature fields, whereas second portion consists of static analysis wherein stress fields due to thermal load is obtained, and the last portion consists of buckling and prestressed modal analyzes to capture the critical buckling temperature as well as first five natural frequencies and associated mode shapes. Finite element is used to perform the numerical investigation. The detailed parametric study is carried out to analyze the effect of nature of temperature variation across the panel, laminate sequence and structural boundary constraints on the buckling and free vibration behavior. The relation between the buckling temperature of the panel under uniform temperature field and non-uniform temperature field is established using magnification factor. Among four cases considered in this study for position of heat sources, highest magnification factor is observed at the forefront curved edge of the panel where heat source is placed. It is also observed that thermal buckling strength and buckling mode shapes are highly sensitive to nature of temperature field and the effect is significant for the above-mentioned temperature field. Furthermore, it is also observed that the panel with antisymmetric laminate has better buckling strength. Free vibration frequencies and the associated mode shapes are significantly influenced by the non-uniform temperature variations.

• 한국통신학회논문지
• /
• 제24권7B호
• /
• pp.1322-1330
• /
• 1999

B-ISDN과 같은 초고속 네트워크에서 전송오류의 주요원인은 과잉밀집 상태에 있어서의 버퍼 오버플로우이며 이로 인해 셀 손실을 야기한다. 기존의 통신 프로토콜은 손실된 패킷이나 전송에러들을 다루기 위해 ARQ와 같이 오류회복을 위해 재전송 기법을 사용하고 있으나 이러한 ARQ 방법들은 재전송으로 인한 전송 지연시간이 매우 크기 때문에 초고속 네트워크에서는 적합하지 않다. 따라서 본 논문은 이러한 문제를 줄이기 위하여 B-ISDN에서 FEC를 이용한 셀손실 회복기법을 제안하였다. 제안된 기법은 새로운 순서번호(SN)인 SN*를 이용하여 연속적인 셀손실을 식별한다. SN*는 SN이외에 다른 두 개의 필드(ST, LI)를 조합하여 생성한 순서번호로 그 특성에 따라 가산적(additive) SN*와 승산적(multiplicative) SN*로 구분된다.이러한 연구결과로 FEC는 네트워크 노드상에 버퍼 오버플로우로 인한 셀손실이 발생한 경우에 유용하며 B-ISDN과 같은 초고속 통신망에서의 셀손실 회복에 효과적으로 사용할 수 있는 오류에 기법임을 보여주고 있다. 본 논문에서 제안된 효율적인 셀손실 회복기법은 향후 ATM 네트워크에서의 우선순위 제어, 과잉밀집 제어 등의 연\ulcorner에 효율적으로 사용될 수 있다.

• 한국통신학회논문지
• /
• 제29권9A호
• /
• pp.991-997
• /
• 2004

본 논문은 HomePNA 2.0 모뎀 칩을 위한 모뎀 수신부의 구조를 제안한다. HomePNA 2.0 전송 채널은 브릿지 탭과 HAM 대역의 영향 등으로 매우 열악하다. 이러한 채널을 통해 전송을 가능하게 하기 위해 HomePNA 2.0 은 훈련신호를 사용하여 매 프레임 마다 채널을 등화하고 FD-QAM 전송 방식을 선택적으로 사용한다. 따라서 모뎀 수신부는 일반적 QAM 방식 신호의 북조 기능과 함께 이러한 전송 방식의 특정을 최대한 상려 모뎀 수신 성 능을 극대화 히는 구조가 필요하다 연구 결과 모뎀 수신부의 가능을 송수신 상태에 따라 정상 수신 모드와 충돌 감지 오드의 2 가지로 정의 하였다 본 논문은 특히, 모뎀 수신부를 구성하는 핵심 블록인 등화기와 위상 동기부, 프레임 동기부에 대해서 사용된 알고리즘을 밝혔으며, 버스트 방식 모뎀의 채널 등화 성능을 높이고 안정적으로 동작 시키기 위한 구조를 제얀 하였다 마지막으로 제안된 모뎀 수신부의 성능을 분석하기 위해서 SPW 모델을 사용하여 채널 별 전송 가능 속도를 예측 하였다.

• 전력전자학회논문지
• /
• 제26권2호
• /
• pp.82-89
• /
• 2021

This study proposes a DAB two-stage series structure with insulated bidirectional DC-DC converter for two-way power transfer between the renewable energy of high voltages (1 kV and above). The proposed circuit transforms the existing DAB converter into a two-stage series structure to reduce the pressure in the switch. The problem of power imbalance occurring in the design of the DAB converter second-stage series is improved by applying the cell balancing method circuit and the common mode coupled inductor using an external flying capacitor instead of reflecting the existing improvement measures, voltage balance control, and inductor current control. In addition, a no-load supercharging sequence is proposed in high voltages and high-speed switching by using the fixed duty output method. This study presents the analysis results through the structure of the proposed circuit, the principle of improving the power imbalance problem, and simulations. Prototypes were manufactured to meet the specifications of input/output voltage of 1700 V, maximum load of 65 kW, and switching frequency of 51kHz, and the validity of the topology was verified using the experimental results and efficiency data.