• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.249-254
• /
• 2008

We developed a new x-ray image sensor utilizing a reflection-mode liquid crystal panel as its sensitive element, and tested its functionality by using it to obtain an x-ray image of a printed circuit board. In the liquid crystal x-ray image sensors hitherto reported, the liquid crystal layer is in direct contact with the photoconductive film which is deposited on a glass substrate. In the fabrication of the new x-ray image sensor, a liquid crystal panel is fabricated in the first step by using a pair of glass plates of a few centimeters thicknrss. Then one of the glass substrates is ground until its thickness is reduced to about $60\;{\mu}m$. After polishing the glass plate, dielectric films for high reflectance at 630 nm, a film of amorphous selenium for photoconduction, and a transparent conductive film for electrode are deposited in sequence. The new x-ray image sensor has several merits: primarily, fabrication of a large area sensor is more easily compared with the old fashioned x-ray image sensors. Since the reflection type liquid crystal panel has a very steep response curve, the new x-ray sensor has much more sensitivity to x-rays compared with the conventional x-ray area sensor, and the radiation dosage can be reduced down to less then 20%. By combining the new x-ray sensor with CCD camera technology, real-time x-ray images can be easily captured. We report the structure, fabrication process and characteristics of the new x-ray image sensor.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.2
• /
• pp.82-89
• /
• 2021

This study proposes a DAB two-stage series structure with insulated bidirectional DC-DC converter for two-way power transfer between the renewable energy of high voltages (1 kV and above). The proposed circuit transforms the existing DAB converter into a two-stage series structure to reduce the pressure in the switch. The problem of power imbalance occurring in the design of the DAB converter second-stage series is improved by applying the cell balancing method circuit and the common mode coupled inductor using an external flying capacitor instead of reflecting the existing improvement measures, voltage balance control, and inductor current control. In addition, a no-load supercharging sequence is proposed in high voltages and high-speed switching by using the fixed duty output method. This study presents the analysis results through the structure of the proposed circuit, the principle of improving the power imbalance problem, and simulations. Prototypes were manufactured to meet the specifications of input/output voltage of 1700 V, maximum load of 65 kW, and switching frequency of 51kHz, and the validity of the topology was verified using the experimental results and efficiency data.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.132-140
• /
• 2018

To lunch the Korea Space Launch Vehicle-II(KSLV-II), a second launch complex will be built at the Naro Space Center, and a Kerosene Filling System (KFS) will be installed. KFS of KSLV-II launch complex system is being designed based on Naro Launch Complex. But this must supply fuel to fuel tanks of the vehicle with only a supply pump because KSLV-II is a 3-stage launch vehicle unlike Naro Launch Vehicle or Test Launch Vehicle (TLV). A sudden rise of pump output pressure is recognized during fuel filling scenario selection process. This occurs because return flow can not actively deal with much flow change using the orifice-type flow-control method. To solve this problem, it is verified that fuel can be stably supplied by installing an accumulator, designed for appropriate adjustment of filling-mode change sequence via flow analysis of various cases.

• BMB Reports
• /
• v.55 no.10
• /
• pp.488-493
• /
• 2022

The specific pair of heat shock protein 70 (Hsp70) and Hsp40 constitutes an essential molecular chaperone system involved in numerous cellular processes, including the proper folding/refolding and transport of proteins. Hsp40 family members are characterized by the presence of a conserved J-domain (JD) that functions as a co-chaperone of Hsp70. Tumorous imaginal disc 1 (Tid1) is a tumor suppressor protein belonging to the DNAJA3 subfamily of Hsp40 and functions as a co-chaperone of the mitochondrial Hsp70, mortalin. In this work, we performed nuclear magnetic resonance spectroscopy to determine the solution structure of JD and its interaction with the glycine/phenylalanine-rich region (GF-motif) of human Tid1. Notably, Tid1-JD, whose conformation was consistent with that of the DNAJB1 JD, appeared to stably interact with its subsequent GF-motif region. Collectively with our sequence analysis, the present results demonstrate that the functional and regulatory mode of Tid1 resembles that of the DNAJB1 subfamily members rather than DNAJA1 or DNAJA2 subfamily proteins. Therefore, it is suggested that an allosteric interaction between mortalin and Tid1 is involved in the mitochondrial Hsp70/Hsp40 chaperone system.

• Composites Research
• /
• v.36 no.1
• /
• pp.25-31
• /
• 2023

Composite structures have been designed by stacking the laminae with different stacking angles to meet the required mechanical performance. Although the induced stresses on the composite structures under the external loads usually differ depending on the location, we determined the stacking sequence based on the maximum stress, which leads to low efficiency and generally is not the optimum design. Recently, piecewise integrated composites (PICs) were suggested for solving this inefficiency. PICs assume the perfect bonding between adjacent pieces, but this is ideal and hard to accomplish. Therefore, the overlap at the boundary is essential to prevent separation from each other. In this study, we investigated the effect of the overlap design on the impact failure mode of PIC plates. We fabricated the sample composite plates with different overlap designs using the fast curing carbon prepreg and conducted the impact tests according to ASTM D 7136. We found that PICs had different failure modes according to the overlap design, which lead the changes of absorbed impact energies as well as impact load curves.

• Journal of The Geomorphological Association of Korea
• /
• v.27 no.1
• /
• pp.33-45
• /
• 2020

A number of unconsolidated deposits, consisting of a layer of gravels and silt, are found in Dangjeong-ri, Seocheon-gun in the western coast. From below in the stratigraphic sequence, the gravel layer ranging up to a maximum thickness of about 2 meters is interpreted as being formed by fluvial processes of an old channel (Dangjeong S.), and the overlying silt or sandy silt layer of 2 to 3 thickness meters is assumed to be emerged paleo-tidal sediments which was deposited in low tidal-energy environments. As the results of rock surface IRSL datings, the depositional ages of gravels are confirmed as ca. 78,000 ~ 83,000 years BP, indicating that the layer was formed in response to a high-stand sea level of MIS 5a along the Dangjeongcheon estuary. It is presumed that the relative height of 4.5 meter between the altitude of the stream bed (9.5 m) and the altitude of the bedrock boundary in the gravel layer (14 m) indicates the uplift amount since deposition. Paleo-sedimentary environments and an altitude of paleo-shoreline in the study area will be discussed with additional age dating focused on the silt layer.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.95-101
• /
• 2009

Random numbers are used in many sorts of applications. Some applications, like simple software simulation tests, communication protocol verifications, cryptography verification and so forth, need various levels of randomness with various process speeds. In this paper, we propose a fast pseudorandom generator module for embedded systems. The generator module is implemented in hardware which can run in two modes, one of which can generate random numbers with higher randomness but which requires six cycles, the other providing its result within one cycle but with less randomness. An ASIP (Application Specific Instruction set Processor) was designed to implement the proposed pseudorandom generator instruction sets. We designed a processor based on the MIPS architecture,, by using LISA, and have run statistical tests passing the sequence of the Diehard test suite. The HDL models of the processor were generated using CoWare's Processor Designer and synthesized into the Dong-bu 0.18um CMOS cell library using the Synopsys Design Compiler. With the proposed pseudorandom generator module, random number generation performance was 239% faster than software model, but the area increased only 2.0% of the proposed ASIP.

• Journal of the Korean Magnetic Resonance Society
• /
• v.4 no.1
• /
• pp.19-28
• /
• 2000

Authors evaluated alterations of observable metabolite ratios between the cerebral lesion and the contralateral region related to the clinical symptomatic side in levodopa-treated Parkinson's disease (PD) and investigated correlation between age in patients with PD and metabolite ratios of the lesion. Patients with levodopa-treated PD (n = 54) and age-matched normal controls (n = 15) underwent magnetic resonance spectroscopy (MRS) examinations using a stimulated echo acquisition mode (STEAM) pulse sequence that provided 2$\times$2$\times$2 cm3 volume of interest in the selected regions of substantia nigra (SN) and putamed-globus pallidus (PG). To evaluate dependence of metabolite ratios on age, we divided into two groups (i.e., younger and older age). We quantitatively measured N-acetylaspartate (NAA), creatine (Cr), choline-containing compounds (Cho), inositols (Ins), and the sum of glutamate (Glx) and GABA levels and obtained proton metabolite ratios relative to Cr using a Marquart algorithm. Compared with the contralateral region, a significant neuronal laterality of the NAA/Cr ratio in the lesion of SN related to the clinical symptomatic side was established (P = 0.01), but was not established in the lesion of PG (P = 0.24). Also, Cho/Cr ratio tended toward significance in the lesion of SN (P = 0.07) and was statistically significant in the lesion of PG(P = 0.01). Compared with that in the younger age group, NAA/Cr ratio in the older age was decreased in the lesion of SN (P = 0.02), while NAA/Cr ratio was not statistically significant in the lesion of PG ( P = 0.21). Significant metabolic alterations of NAA/Cr and Cho/Cr ratios might be closely related with functional changes of neuropathological process in SN and PG of levodopa treated PD and could be a valuable finding for evaluation of the PD. A trend of NAA/Cr reduction, being statistically significant in older patients, could be indicative of more pronounced neuronal damage in the SN of the progressive PD.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.8
• /
• pp.639-651
• /
• 2018

An analytical solution to generate attitude command profile for agile spacecraft is proposed. In realistic environment, obtaining analytical minimum-time optimal solution is very difficult because of following constraints-: 1) actuator saturation, 2) flexible mode excitation, 3) uplink command bandwidth limit. For that reasons, this paper applies two simplifications, an eigen-axis rotation and a finite-jerk approximated profile, to derive the solution in an analytical manner. The resulting attitude profile can be used as a feedforward or reference input to on-board attitude controller, and it can enhance spacecraft agility. Equations of attitude command profile are derived in two general boundary conditions: rest-to-rest maneuver and spin-to-spin maneuver. Simulation results demonstrate that the initial and final boundary conditions, in terms of time, attitude, and angular velocities, are well satisfied with the proposed analytical solution. The derived attitude command generation algorithm may be used to minimize a number of parameters to be uploaded to spacecraft or to automate a sequence of attitude command generation on-board.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8A
• /
• pp.820-829
• /
• 2006

IP-based design methodology has been popularly employed for SoC design to reduce design complexity and to cope with time-to-market pressure. Due to the request for high performance of current mobile systems, embedded SoC design needs a multi-processor to manage problems of high complexity and the data processing such as multimedia, DMB and image processing in real time. Interface module for communication between system buses and processors are required, since many IPs employ different protocols. High performance processors require interface module to minimize the latency of data transmission during read-write operation and to enhance the performance of a top level system. This paper proposes an automatic interface generation system based on FSM generated from the common protocol description sequence of a bus and an IP. The proposed interface does not use a buffer which stores data temporally causing the data transmission latency. Experimental results show that the area of the interface circuits generated by the proposed system is reduced by 48.5% on the average, when comparing to buffer-based interface circuits. Data transmission latency is reduced by 59.1% for single data transfer and by 13.3% for burst mode data transfer. By using the proposed system, it becomes possible to generate a high performance interface circuit automatically.