• Journal of Communications and Networks
• /
• 제7권3호
• /
• pp.243-247
• /
• 2005

We propose an efficient block least-mean-square (BLMS) adaptive algorithm, in conjunction with error control coding, for direct-sequence code division multiple access (DS-CDMA) systems. The proposed adaptive receiver incorporates decision feedback detection and channel encoding in order to improve the performance of the standard LMS algorithm in convolutionally coded systems. The BLMS algorithm involves two modes of operation: (i) The training mode where an uncoded training sequence is used for initial filter tap-weights adaptation, and (ii) the decision-directed where the filter weights are adapted, using the BLMS algorithm, after decoding/encoding operation. It is shown that the proposed adaptive receiver structure is able to compensate for the signal-to­noise ratio (SNR) loss incurred due to the switching from uncoded training mode to coded decision-directed mode. Our results show that by using the proposed adaptive receiver (with decision feed­back block adaptation) one can achieve a much better performance than both the coded LMS with no decision feedback employed. The convergence behavior of the proposed BLMS receiver is simulated and compared to the standard LMS with and without channel coding. We also examine the steady-state bit-error rate (BER) performance of the proposed adaptive BLMS and standard LMS, both with convolutional coding, where we show that the former is more superior than the latter especially at large SNRs ($SNR\;\geq\;9\;dB$).

• 한국통신학회논문지
• /
• 제29권7A호
• /
• pp.727-734
• /
• 2004

Collision Management Protocol (CMP)은 매체 접근 제어 (MAC) 방식이 랜덤 접근 (Random Access)인 HomePNA 3.0 비동기 MAC 모드 시스템으로 구성된 네트워크에서 데이터 프레임 전송 시에 발생하는 충돌을 해결하기 위한 프로토콜이다. 이 프로토콜의 특징은 기존 HomePNA 2.0 시스템의 Distributed fair Priority Queueing (DFPQ) 알고리즘이나 802.11 시스템의 Binary Exponential Backoff (BEB) 알고리즘과는 달리 충돌이 발생한 시스템들의 재 전송 순서를 랜덤 확률로서 결정하지 않고, 각 시스템별로 주어진 Collision Signaling Sequence (CSS) 간을 사용하여 순서를 결정한다. 즉, 재 전송 순서를 사전에 정의된 순서로 결정함으로서 평균적인 충돌 횟수를 최소화 할 수 있게 된다. 본 논문에서는 유선 홈 네트워킹 기술인 HomePNA 3.0의 CMP에 대하여 포화(Saturation) 상태에서의 성능을 분석한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.291-292
• /
• 2006

This paper presents rate-distortion optimization that is considered sequence statistics(complexity) to choose the best macroblock mode decision in H.264. In previous work, Lagrange multiplier is derived by the function of constant value 0.85 and QP so that is not the proper Lagrange multilplier for any image sequence. The proposed algorithm solves the problem by changing constant value 0.85 into adaptive value which is influenced by image complexity, and by reducing the encoder complexity to estimate the image statistics with the multiplication of transformed, quantized rate and distortion. Proposed algorithm is achieved the bit-rate saving up to 5% better than previous method.

• Advances in aircraft and spacecraft science
• /
• 제7권2호
• /
• pp.151-168
• /
• 2020

The present study deals with the repair of composite structures by bonding composite patches. The composite structure is a carbon/epoxy laminate with stacking sequence [45/-45/0/90]S. The damaged zone is simulated by a central crack and repaired by bonding symmetrical composite patches. The repair is carried out using composite patches laminated from the same elemental folds as those of the cracked specimen. Three-dimensional finite element method is used to determine the energy release rate along the front of repaired crack. The effects of the repair technique used single or double patch, the stacking sequence of the cracked composite patch and the adhesive properties were highlighted on the variations of the fracture energy in mode I and mixed mode I + II loading.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1718-1723
• /
• 1991

The determination of a production sequence is an important problem in a batch process operation. In this paper a new algorithm for a near optimal production sequence of N product in an M unit serial multiproduct batch process is proposed. The basic principle is the same as that of Johnson's algorithm for two-unit UIS system. Test results on a number of selected examples exhibit the superiority over previously reported results. In addition, a tabulation technique is presented to calculate the makespan of a given sequence of production for all processing units under UIS mode.

• 산업공학
• /
• 제5권1호
• /
• pp.3-14
• /
• 1992

This paper deals with the development of setup planning for Automated FIXture planning system(AFIX) which selects setups, setup sequence and operation sequence in each setup according to the machining mode. In AFIX, part type considered is prismatic workpiece that use the 3-2-1 locating system as the general structure of the fixture. The heuristic algorithms selecting setup and setup sequence are based on DDR(Degree of Dimensional Relationship), AMV(Admissible Misalignment Value) and machining sterategy and feature attributes. A case example is given to illustrate the performance fo AFIX.

• 대한안전경영과학회지
• /
• 제3권4호
• /
• pp.103-112
• /
• 2001

In Factory, as the number of machine is increased the more maintenance efforts are necessary. Multi maintenance issues may occur at a certain time and the determination of maintenance sequence is needed. In this study, we first compare the priority of machines and the impact value using modified FMEA(Failure Mode Effect and Analysis) method. Also, CBR(Case-based Reasoning) approach is applied to retrieve similar fault cases of current machine problem. The proposed methodology will be useful to implement decision support system of maintenance sequence for CMMS/EAM (Computerized Maintenance Management System/Enterprise Asset Management).

• 조명전기설비학회논문지
• /
• 제28권12호
• /
• pp.108-115
• /
• 2014

Recently, Uninterruptible power supply(UPS) is spotlighted from concern about black out, due to reserve power problem caused by increased power consumption. When fault occurs on the grid, UPS system supplies power to loads instead of the grid. Also, it is an advantage of possible operation as Energy storage system(ESS). Bi-directional power control of AC/DC Pulse width modulation(PWM) converter is essential for grid-connected UPS system. And, mode transfer control has to be performed considering phase and dynamic characteristic under grid condition. In this paper, control of mode transfer and bi-directional power control of AC/DC PWM converter is proposed for UPS system. Also, it is verified by simulation and experimental results.

• 한국동물학회:뉴스레터
• /
• 제12권2호
• /
• pp.84.1-84
• /
• 1995

No Abstract, See Full Text

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 1995년도 한국생물과학협회 학술발표대회
• /
• pp.130.1-130
• /
• 1995

No Abstract, See Full Text