• 제목/요약/키워드: Mode I

검색결과 2,225건 처리시간 0.036초

Resazurin 기반 호흡 측정법을 이용한 고추탄저병균에 대한 살균제의 효과 검정 (Evaluation of Acitivity of QoI Fungicide against Colletotrichum acutatum s. lat. Causing Pepper Anthracnose Using Resazurin-Based Respiration Assay)

  • 박수빈;김흥태
    • 식물병연구
    • /
    • 제29권1호
    • /
    • pp.11-22
    • /
    • 2023
  • Resazurin 기반 호흡 측정법으로 strobilurin계 살균제에 대해서 감수성인 고추탄저병균 Colletotrichum acutatum s. lat. 20JDS8에 대한 살균제의 호흡 억제 효과를 조사하였다. Potato dextrose broth에 병원균의 포자를 접종하고 배양하면서 시간별로 상대 형광값(relative fluorescence unit)을 조사한 결과, 12시간 후부터 상승하기 시작하여 24시간 후의 1×104, 1×105, 1×106 spores/ml의 포자 접종구에서 상대 형광값은 1,965.5, 5,412.5, 10,061.0이었다. 병원균을 0, 6, 12, 24시간씩 배양 후에 공시한 살균제를 처리하고, 24시간 후에 상대 형광값을 조사하였다. Dithianon, isopyrazam, pyraclostrobin, fluazinam을 병원균의 포자(0시간), 포자 발아(6시간), 균사 생장(12시간) 단계에 처리할 경우, 각 살균제의 고농도에서 호흡을 90-100% 억제하였다. 하지만 병원균을 24시간 배양한 후에 살균제를 처리할 경우에는 호흡 억제 효과가 크게 감소하였다. Pyraclostrobin 저항성인 C. acutatum s. lat. 20CDJ6에 대해서 pyraclostrobin, azxoystrobin, trifloxystrobin, kresoxim-methyl을 병원균의 모든 생장 단계에 각각 처리하였을 때, 호흡에 대한 억제 효과는 매우 미미하거나, 나타나지 않았다.

계통 연계형 태양광 발전시스템의 전력변환기 제어에 관한 연구 (A Study on the Power Converter Control of Utility Interactive Photovoltaic Generation System)

  • 나승권;구기준;김계국
    • 한국컴퓨터정보학회논문지
    • /
    • 제14권2호
    • /
    • pp.157-168
    • /
    • 2009
  • 본 논문에서는 태양광 발전시스템을 이용한 승압 초퍼와 전압형 PWM(Pulse Width Modulation) 인버터인 전력변환기로 구성하였고, 안정된 변조를 위해서 동기신호와 제어신호를 원칩 마이크로프로세서에 의해서 처리하였다. 전력비교에 따라 시간 비율을 변화시키지만 태양전지는 전형적인 수하특성을 갖고 있어, 일사량과 온도변화에 관계없이 항상 최대 출력점을 추적하도록 승압초퍼를 제어하였다. 또한 PWM 전압형 인버터는 태양전지가 연속 발전할 수 없는 단점을 보완하기 위해 일반 상용전원과 연계함으로써 약 $10{\sim}20[%]$ 전력절감효과를 얻을 수 있는 에너지절약 전원 복합형 전력변환장치로 구성하였다. 그리고 태양광 발전의 효율을 높이기 위하여 센서와 마이크로프로세서를 이용한 태양광위치추적 장치를 설계하여 고정방식의 태양광 발전에 대하여 비교해 보았다. 그 결과, 태양광 위치추적장치는 고정방식의 태양광 발전에 비해 5% 정도 개선됨을 알 수 있었다. 또한, PWM 전압형 인버터와 위상동기를 위해서 계통전압을 검출하여 계통전압과 인버터 출력을 동상 운전하므로 잉여전력을 계통과 연계할 수 있게 하였다. 그리고 고역율과 저고조파 출력을 유지함으로서 부하와 계통에 전력이 안정하게 공급될 수 있도록 제어하였다.

Manufacturing and testing of flat-type divertor mockup with advanced materials

  • Nanyu Mou;Xiyang Zhang;Qianqian Lin;Xianke Yang;Le Han;Lei Cao;Damao Yao
    • Nuclear Engineering and Technology
    • /
    • 제55권6호
    • /
    • pp.2139-2146
    • /
    • 2023
  • During reactor operation, the divertor must withstand unprecedented simultaneous high heat fluxes and high-energy neutron irradiation. The extremely severe service environment of the divertor imposes a huge challenge to the bonding quality of divertor joints, i.e., the joints must withstand thermal, mechanical and neutron loads, as well as cyclic mode of operation. In this paper, potassium-doped tungsten (KW) is selected as the plasma facing material (PFM), oxygen-free copper (OFC) as the interlayer, oxide dispersion strengthened copper (ODS-Cu) alloy as the heat sink material, and reduced activation ferritic/martensitic (RAFM) steel as the structural material. In this study, a vacuum brazing technology is proposed and optimized to bond Cu and ODS-Cu alloy with the silver-free brazing material CuSnTi. The most appropriate brazing parameters are a brazing temperature of 940 ℃ and a holding time of 15 min. High-quality bonding interfaces have been successfully obtained by vacuum brazing technology, and the average shear strength of the as-obtained KW/Cu and ODS-Cu alloy joints is ~268 MPa. And a fabrication route for manufacturing the flat-type divertor target based on brazing technology is set. For evaluating the reliability of the fabrication technologies under the reactor relevant condition, the high heat flux test at 20 MW/m2 for the as-manufactured flat-type KW/Cu/ODS-Cu/RAFM mockup is carried out by using the Electron-beam Material testing Scenario (EMS-60) with water cooling. This paper reports the improved vacuum brazing technology to connect Cu to ODS-Cu alloy and summarizes the production route, high heat flux (HHF) test, the pre and post non-destructive examination, and the surface results of the flat-type KW/Cu/ODS-Cu/RAFM mockup after the HHF test. The test results demonstrate that the mockup manufactured according to the fabrication route still have structural and interfacial integrity under cyclic high heat loads.

평면 소자형 락테이트 바이오센서 (Planar microchip-based lactate biosensor)

  • 하정한;허황;강태영;이용석;윤순호;신정원;남학현;차근식
    • 분석과학
    • /
    • 제19권6호
    • /
    • pp.482-489
    • /
    • 2006
  • Pediococcus에서 추출된 lactate oxidase(LOD)를 poly(vinyl alcohol)(PVA)에 고정화하여 2전극계로 구성된 lactate 바이오센서를 제조하였다. Lactate는 LOD 효소와의 반응에서 생성되는 $H_2O_2$를 전기화학적으로 금(Au)위에 형성시킨 Pt-black 층에서 산화시켜 정량 할 수 있었다. Pt-black으로 만들어진 센서는 과산화수소에 대해서 낮은 전위(+300 mV vs. Ag/AgCl)에서 큰 산화전류를 보여주었으며, ascorbic acid, acetaminophen, uric acid 등과 같이 산화되기 쉬운 산화 종들의 영향을 감소시켜주었다. 외부보호막으로는 다양한 종류의 친수성 폴리우레탄을 사용하였다. 센서는 in vitro 방식으로 흐름계와 비흐름계 모두에서 성능을 평가하였다. 제작된 센서는 0.05 M NaCl을 포함하는 0.05 M 인산염 완충용액(pH 7.6)에서 성능을 시험하였으며, 0.1 mM에서 9.0 mM의 lactate 농도구간에서 직선적 감응성을 나타내었다. 최적화된 센서는 $4^{\circ}C$ 완충용액에 보관하였으며, 25일 이상 감응도(sensitivity)가 거의 변화하지 않았다.

p-수렴 적층 평판이론에 의한 균열판의 팻취보강후 응력확대계수 산정 (Stress Intensity Factor of Cracked Plates with Bonded Composite Patch by p-Convergence Based Laminated Plate Theory)

  • 우광성;한상현;양승호
    • 대한토목학회논문집
    • /
    • 제28권5A호
    • /
    • pp.649-656
    • /
    • 2008
  • 손상 또는 균열된 구조물의 내구성을 향상시키려는 과제는 연구자들과 엔지니어들에게 중요한 과제로 떠오르고 있다. 팻취로 보강되지 않은 균열판과 팻취보강된 균열판의 응력확대계수 및 응력등고선의 산정 및 비교에 의한 균열선단에서의 파괴거동의 특성을 적분형 르장드르 다항식에 기초를 둔 계층적 무강성요소를 사용하여 표현하고자 한다. 이 연구에서는 등가단층이론이 채택되므로, 제안된 무강성요소는 불연속 균열부를 강성이 0인 연속체로 간주된다. 그러므로 균열을 모델링하는 무강성요소의 변장비는 매우 커질 수밖에 없다. 제안된 요소의 강건성을 보이기 위해 형상비 변화에 따른 에너지방출률, 변위 및 응력값에 대한 유한요소해의 민감도는 변장비를 2000까지 증가시켜 가면서 평가되었다. 한편, 강성도미분법과 변위외삽법이 인장모우드가 발생되는 문제의 응력확대계수를 예측하는데 사용된다. 제안된 계층적 무강성요소는 팻취보강된 균열문제를 해석할 수 있는 대안중의 하나라 평가된다.

Experimental and numerical study on the structural behavior of Multi-Cell Beams reinforced with metallic and non-metallic materials

  • Yousry B.I. Shaheen;Ghada M. Hekal;Ahmed K. Fadel;Ashraf M. Mahmoud
    • Structural Engineering and Mechanics
    • /
    • 제90권6호
    • /
    • pp.611-633
    • /
    • 2024
  • This study intends to investigate the response of multi-cell (MC) beams to flexural loads in which the primary reinforcement is composed of both metallic and non-metallic materials. "Multi-cell" describes beam sections with multiple longitudinal voids separated by thin webs. Seven reinforced concrete MC beams measuring 300×200×1800 mm were tested under flexural loadings until failure. Two series of beams are formed, depending on the type of main reinforcement that is being used. A control RC beam with no openings and six MC beams are found in these two series. Series one and two are reinforced with metallic and non-metallic main reinforcement, respectively, in order to maintain a constant reinforcement ratio. The first crack, ultimate load, deflection, ductility index, energy absorption, strain characteristics, crack pattern, and failure mode were among the structural parameters of the beams under investigation that were documented. The primary variables that vary are the kind of reinforcing materials that are utilized, as well as the kind and quantity of mesh layers. The outcomes of this study that looked at the experimental and numerical performance of ferrocement reinforced concrete MC beams are presented in this article. Nonlinear finite element analysis (NLFEA) was performed with ANSYS-16.0 software to demonstrate the behavior of composite MC beams with holes. A parametric study is also carried out to investigate the factors, such as opening size, that can most strongly affect the mechanical behavior of the suggested model. The experimental and numerical results obtained demonstrate that the FE simulations generated an acceptable degree of experimental value estimation. It's also important to demonstrate that, when compared to the control beam, the MC beam reinforced with geogrid mesh (MCGB) decreases its strength capacity by a maximum of 73.33%. In contrast, the minimum strength reduction value of 16.71% is observed in the MC beams reinforced with carbon reinforcing bars (MCCR). The findings of the experiments on MC beams with openings demonstrate that the presence of openings has a significant impact on the behavior of the beams, as there is a decrease in both the ultimate load and maximum deflection.

진해만 양식어장 주변 표층 퇴적물 중 미량금속의 분포 특성 및 오염 평가 (Distribution and Pollution Assessment of Trace Metals in the Surface Sediments around Farming Area of Jinhae Bay)

  • 최태준;권정노;이가람;황현진;김영숙;임재현
    • 해양환경안전학회지
    • /
    • 제21권4호
    • /
    • pp.347-360
    • /
    • 2015
  • 2013년 8월 진해만을 대상으로 표층 퇴적물을 채취하여 미량금속(As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Pb, Zn)의 분포를 살펴보고, 오염도를 분석하였다. 미량금속의 평균농도는 As 11.1 mg/kg, Cd 0.52 mg/kg, Co 14.1 mg/kg, Cr 69.8 mg/kg, Cu 57.2 mg/kg, Fe 3.7 %, Hg 0.064 mg/kg, Mn 600 mg/kg, Pb 40.1 mg/kg, Zn 167.2 mg/kg 의 범위로 조사되었다. 미량금속 중 As, Co, Cr, Fe의 농도는 만 전반적으로 균일한 분포를 보였다. 반면, Cd, Hg, Pb, Zn는 마산만을 포함한 진해만의 북쪽 해역, Cu는 진해만 남동쪽의 고현만, Mn은 거제도 북쪽과 마산만 남쪽을 잇는 만 동쪽방면의 외해로 열린 해역에서 국지적으로 높은 농도를 나타냈다. 각 미량금속의 공간적 분포, 퇴적물 입도 및 미량금속 간의 상관관계와 요인분석 결과 등을 종합적으로 검토해봤을 때, Co, Cr, Fe는 퇴적물의 입도, Mn은 퇴적물의 산화환원 상태, 그리고 As, Cd, Cu, Hg, Pb, Zn은 만 주변의 오염활동으로 인한 미량금속 공급에 따라 분포가 지배되는 것으로 파악되었다. 미량금속 중 As, Cd, Cr, Hg, Pb의 농도를 국내 해양 퇴적물 환경기준인 주의기준(TEL), 관리기준(PEL)과 비교 시, Cd, Hg, Pb의 농도가 만의 북쪽인 마산만 주변에서 주의기준을 초과하였다. 각 미량금속의 농축계수 및 농집지수를 계산한 결과, As, Cd, Cu, Hg, Mn, Pb, Zn가 일부 해역에서 인위적 오염을 보였다. 이 중 As, Mn, Zn은 우려할만한 수준의 오염을 보이진 않았으나, 마산만을 포함한 만 북쪽에서는 Cd, Hg, Pb, 만 남동쪽 가장 안쪽의 고현만에서는 Cu로 인한 오염 수준이 비교적 높게 나타나 해당 원소의 농축에 대해 주의가 필요할 것으로 판단된다.

치과용 접착제를 사용한 접착 아말감의 결합 강도 (BOND STRENGTH OF BONDED AMALGAM USING DENIAL ADHESIVES)

  • 감동훈;이상대;한세현
    • 대한소아치과학회지
    • /
    • 제26권2호
    • /
    • pp.284-295
    • /
    • 1999
  • 아말감의 단점인 건전 치질 삭제와 미세 누출을 줄이기 위한 접착 아말감(bonded amalgam)에 사용되는 치과용 접착제의 접착 강도를 측정하고 파절면을 관찰하여 콤포지트 레진과 비교 평가하였다. 발거한 우전치의 순면을 직경 8mm의 원형으로 천공하여 얻은 부분을 순면이 바깥쪽으로 향하도록 아크릴릭 레진 블록에 매몰하여 상아질과 법랑질군을 각각 55개씩 준비하였다. 1군:Superbond C&B, 2군:Panavia 21, 3군:All-Bond 2, 4군:Fuji I Glass Ionomer Luting Cement, 5군:Scotchbond Multi-Purpose(Restorative Z-100)의 5개 군으로 나누어 지름 6.3mm, 깊이 1.5mm의 구멍이 뚫린 충전용 틀(mold)을 위치시키고 표면을 접착제로 처리한 후 아말감 충전을 하였다. 5군은 레진 충전 후 40초간 광중합하였다. 각 시편은 아말감 충전 24시간 후 접착 강도 측정용 기구에 장착하고 만능 시험기에서 0.2mm/min의 cross-head 속도로 하중을 가하여 시편이 탈락할 때까지의 하중값(kg)을 측정하고, 파절면을 검사하여 다음과 같은 결론을 얻었다. 1. 상아질군에서 1, 2, 4군은 5군에 비하여 통계학적으로 유의성 있게 낮은 접착 강도를 보였다(P<0.05). 2. 법랑질군에서 4군은 5군에 비하여 통계학적으로 유의성 있게 낮은 접착 강도를 보였다(P<0.05). 3. 2군에서는 상아질군에서 법랑질군에 비하여 통계학적으로 유의성 있게 낮은 접착 강도를 보였으나(P<0.05), 다른 접착제에서는 상아질군과 법랑질군에서의 접착 강도가 유의성 있는 차이를 보이지 않았다(P>0.05). 4. Cohesive failure는 1E군과 5D군에서 관찰되었고, mixed failure는 1, 5군에서 관찰되었으며, 2, 3, 4군에서는 adhesive failure만 관찰되었다.

  • PDF

Genetic Parameters of Pre-adjusted Body Weight Growth and Ultrasound Measures of Body Tissue Development in Three Seedstock Pig Breed Populations in Korea

  • Choy, Yun Ho;Mahboob, Alam;Cho, Chung Il;Choi, Jae Gwan;Choi, Im Soo;Choi, Tae Jeong;Cho, Kwang Hyun;Park, Byoung Ho
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제28권12호
    • /
    • pp.1696-1702
    • /
    • 2015
  • The objective of this study was to compare the effects of body weight growth adjustment methods on genetic parameters of body growth and tissue among three pig breeds. Data collected on 101,820 Landrace, 281,411 Yorkshire, and 78,068 Duroc pigs, born in Korean swine breeder farms since 2000, were analyzed. Records included body weights on test day and amplitude (A)-mode ultrasound carcass measures of backfat thickness (BF), eye muscle area (EMA), and retail cut percentage (RCP). Days to 90 kg body weight (DAYS90), through an adjustment of the age based on the body weight at the test day, were obtained. Ultrasound measures were also pre-adjusted (ABF, EMA, AEMA, ARCP) based on their test day measures. The (co)variance components were obtained with 3 multi-trait animal models using the REMLF90 software package. Model I included DAYS90 and ultrasound traits, whereas model II and III accounted DAYS90 and pre-adjusted ultrasound traits. Fixed factors were sex (sex) and contemporary groups (herd-year-month of birth) for all traits among the models. Additionally, model I and II considered a linear covariate of final weight on the ultrasound measure traits. Heritability ($h^2$) estimates for DAYS90, BF, EMA, and RCP ranged from 0.36 to 0.42, 0.34 to 0.43, 0.20 to 0.22, and 0.39 to 0.45, respectively, among the models. The $h^2$ estimates of DAYS90 from model II and III were also somewhat similar. The $h^2$ for ABF, AEMA, and ARCP were 0.35 to 0.44, 0.20 to 0.25, and 0.41 to 0.46, respectively. Our heritability estimates varied mostly among the breeds. The genetic correlations ($r_G$) were moderately negative between DAYS90 and BF (-0.29 to -0.38), and between DAYS90 and EMA (-0.16 to -0.26). BF had strong $r_G$ with RCP (-0.87 to -0.93). Moderately positive $r_G$ existed between DAYS90 and RCP (0.20 to 0.28) and between EMA and RCP (0.35 to 0.44) among the breeds. For DAYS90, model II and III, its correlations with ABF, AEMA, and ARCP were mostly low or negligible except the $r_G$ between DAYS90 and AEMA from model III (0.27 to 0.30). The $r_G$ between AEMA and ABF and between AEMA and ARCP were moderate but with negative and positive signs, respectively; also reflected influence of pre-adjustments. However, the $r_G$ between BF and RCP remained non-influential to trait pre-adjustments or covariable fits. Therefore, we conclude that ultrasound measures taken at a body weight of about 90 kg as the test final should be adjusted for body weight growth. Our adjustment formulas, particularly those for BF and EMA, should be revised further to accommodate the added variation due to different performance testing endpoints with regard to differential growth in body composition.

신안군(新安郡) 낙도(落島)에서 발생(發生)한 괴질(怪疾)의 원인(原因)에 관한 역학적(疫學的) 조사(調査)(I) (Epidemiologic Investigation for the Etiology of an Epidemic Ocurred among Animals and Humans in an Isolated Island, Korea(I))

  • 김정순;허용;윤형렬;이원영
    • Journal of Preventive Medicine and Public Health
    • /
    • 제22권2호
    • /
    • pp.290-301
    • /
    • 1989
  • This is preliminary report on anthrax epidemic occurred in an island with about 100 residents. Since 1982 there had been sudden deaths among all kinds of domestic animals including cattle, dogs, ducks, chicken and goat but only a few among cats in an isolated island about three hours distance away by ferry boat from Mokpo city. From 1986 through 1988 nine human deaths and four patients occurred, which made the government intervene for investigation on June 25 1988. The epidemiological investigation consisted of interview survey and medical examination, medical record analysis, laboratory work to isolate the pathogens under the direction of hypothesis derived from the study and further confirmation of the pathogens by international institute. The summarized results are as followings: 1. According to the interview survey there were many deaths among domestic animals usually in cold and dry season such as January through March and September through November; 36 heads of cattle leaving one head, more than 40 hogs(all), hundreds of chicken leaving few alive, goats that had taken home from mountain and two or three cats out of around 40 had sudden deaths from 1982 till 1985, when the residents stopped to purchase and take them into the island anymore. Also there were eleven persons who had experienced the similar syndrome complex to those of admitted and expired patients and four of them revealed typical chest X-ray findings; from one of these four patients(Rho) B. anthracis is isolated. 2. Medical record on patients who had been admitted, showed common characteristics of the disease course. On admission they had either gastrointestinal or upper respiratory infection symptoms which invariably progressed to septicemic nature with pulmonary interstitial infiltration and mediastinal widening/bulging, and then to deadly acute respiratory distress syndrome. At the end stage chest X-ray revealed multiple bullous emphysema. One of another characteristics was oral ulceration with bleeding occurred in about 50% of the patients. Laboratory test results in common were leukocytosis with left shift and abnormal liver and kidney functions, particularly at the later stage of the illness. 3. Epidemiological characteristics was striking in that both mortality and incidence rates were high: the mortality rate was 8.7% average, male being three times higher than females but there was no distictive clustering by age group. The incidence rate for both sexes was 28.2% and there was no sex difference although a tendency of higher incidence among older ages was noticed. The highest mortality and incidence were observed in Won village where the first death of animal occurred and with the highest frequency among three villages of the island. 4. Among twelve bacilli species isolated from various specimens, two strains, one from patient and the other from soil where the recently died cow is hurried, were confirmed as B. anthracis by Pasteur Institute and CDC of USA(strain from soil). CDC reported that the strain did not produce capsule in bicarbonate media but reacted with the bacteriophage and one of five sera taken from the patients. Mode of transmission as well as incubation period of the agent has not been established yet, which needs further investigation in relation to the antigenic structure of the variant when it is confirmed.

  • PDF