• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.127-132
• /
• 2006

Quantization in video coding plays an important role in controlling the bit-rate of compressed video bit-streams. It has been used as an important control means to adjust the amount of bit-streams to at]owed bandwidth of delivery networks and storage. Due to the dependent nature of video coding, dependent quantization has been proposed and applied for MPEG-2 video coding to better maintain the quality of reconstructed frame for given constraints of target bit-rate. Since Scalable Video Coding (SVC) being currently standardized exhibits highly dependent coding nature not only between frames but also lower and higher scalability layers where the dependent quantization can be effectively applied, in this paper, we propose a dependent quantization scheme for SVC and compare its performance in visual qualities and bit-rates with the current JSVM reference software for SVC. The proposed technique exploits the frame dependences within each GOP of SVC scalability layers to formulate dependent quantization. We utilize Lagrange optimization, which is widely accepted in R-D (rate-distortion) based optimization, and construct trellis graph to find the optimal cost path in the trellis by minimizing the R-D cost. The optimal cost path in the trellis graph is the optimal set of quantization parameters (QP) for frames within a GOP. In order to reduce the complexity, we employ pruning procedure using monotonicity property in the trellis optimization and cut the frame dependency into one GOP to decrease dependency depth. The optimal Lagrange multiplier that is used for SVC is equal to H.264/AVC which is also used in the mode prediction of the JSVM reference software. The experimental result shows that the dependent quantization outperforms the current JSVM reference software encoder which actually takes a linear increasing QP in temporal scalability layers. The superiority of the dependent quantization is achieved up to 1.25 dB increment in PSNR values and 20% bits saving for the enhancement layer of SVC.

• Journal of Broadcast Engineering
• /
• v.12 no.3
• /
• pp.250-265
• /
• 2007

In this paper, a fast intermode decision scheme is introduced by efficiently performing the mode decision using statistical hypothesis testing for hierarchical B-picture coding of SVC, in which much computational power is expensed for combined variable block sizes and hierarchical B-pictures. The hypothesis testing in the proposed method is performed on $16{\times}16\;and\;8{\times}8$ blocks to have early termination for RD computation of all possible modes. The early termination in intermode decision is performed by comparing the pixel values of current blocks and corresponding motion-compensated blocks. The proposed scheme exhibits effective early termination behavior in intermode decision and leads to a significant reduction up to 69% in computational complexity with slight increment in bit amounts. The degradation of visual quality turns out to be negligible in terms of PSNR values.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1481-1500
• /
• 2016

Device-to-Device (D2D) communication underlaying macro-small cell networks, as one of the promising technologies in the era of 5G, is able to improve spectral efficiency and increase system capacity. In this paper, we model the cross- and co-tier D2D communications in two-tier macro-small cell networks. To avoid the complicated interference for cross-tier D2D, we propose a mode selection scheme with a dedicated resource sharing strategy. For co-tier D2D, we formulate a joint optimization problem of power control and resource reuse with the aim of maximizing the overall outage capacity. To solve this non-convex optimization problem, we devise a heuristic algorithm to obtain a suboptimal solution and reduce the computational complexity. System-level simulations demonstrate the effectiveness of the proposed method, which can provide enhanced system performance and guarantee the quality-of-service (QoS) of all devices in two-tier macro-small cell networks. In addition, our study reveals the high potential of introducing cross- and co-tier D2D in small cell networks: i) cross-tier D2D obtains better performance at low and medium small cell densities than co-tier D2D, and ii) co-tier D2D achieves a steady performance improvement with the increase of small cell density.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.2
• /
• pp.106-112
• /
• 2007

This paper proposes a hybrid architecture algorithm for fast computation of DCT and DFT via recursive factorization. Recursive factorization of DCT-II and DFT transform matrix leads to a similar architectural structure so that common architectural base may be used by simply adding a switching device. Linking between two transforms was derived based on matrix recursion formula. Hybrid acrchitectural design for DCT and DFT matrix decomposition were derived using the generation matrix and the trigonometric identities and relations. Data flow diagram for high-speed architecture of Cooley-Tukey type was drawn to accommodate DCT/DFT hybrid architecture. From this data flow diagram computational complexity is comparable to that of the fast DCT algorithms for moderate size of N. Further investigation is needed for multi-mode operation use of FFT architecture in other orthogonal transform computation.

• Journal of Drive and Control
• /
• v.17 no.3
• /
• pp.33-46
• /
• 2020

We introduce a piece of special-purpose equipment for responding to disasters that has a dual-arm manipulator consisting of six-axis multi joints, and a master-slave operating system controlled by a wearable joystick for intuitive and convenient operation. However, due to the complexity and diversity of a disaster environment, training and suitable training means are needed to improve the interaction between the driver and equipment. Therefore, in this paper, a system that can improve the operator's immersion in the training simulation is proposes, this system is implemented in a virtual environment. The implemented system consists of a cabin installed with the master-slave operation system, a motion platform, visual and sound systems, as well as a real-time simulation device. This whole system was completed by applying various techniques such as a statistical mapping method, inverse kinematics, and a real-time physical model. Then, the implemented system was evaluated from a point of view of the appropriateness of the mapping method, inverse kinematics, the feasibility for real-time simulations of the physical environment through some task mode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.209-214
• /
• 2003

Multi-mode coding method is a reliable DC-suppression method. There are two ways to improve the DC-suppression performance. One is improving scrambler's performance, and the other is improving selection criteria. The latter uses the MRDS(minimum running digital sum) criterion. It is easy to calculate, but its performance goes down when the length of codeword is getting longer. The MSW(mean squared weight) criterion that is known as the best so far regardless of the length of codeword has the high complexity. In this paper, we present the new selection criteria, MPRDS(minimum peak RDS) and A BSRDS(absolute RDS). Their performance are close to the MSW, implementation is simple. And also we present the SC(sign change) that has a subsidiary role with the original selection criteria and improve the capacity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.239-247
• /
• 2003

This paper presents a dual-rate (2.4/4.0 kbps) Improved Harmonic-CELP(IHC) speech coder based on the EHC(Efficient Harmonic-CELP) which was presented by the authors. The proposed IHC employs the harmonic coding for voiced and the CELP for unvoiced segments. In the IHC, an initial voiced/unvoiced estimate is obtained by the pitch gain and energy. Then, the final V/UV mode is decided by using the frame energy contour. A new harmonic estimation combining peak picking and delta adjustment provides a more reliable harmonic estimation than that in the EHC. In addition, a noise mixing scheme in conjunction with an improved band voicing measurement provides the naturalness of the synthesized speech. To demonstrate the performance of the proposed IHC coder, the coder has been implemented and compared with the 2.0/4.0 kbps HVXC(Harmonic excitation Vector Coding) standardized by MPEG-4. Results of subjective evaluation showed that the proposed IHC coder and produce better speech quality than the HVXC, with only 40% complexity of the HVXC.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.12
• /
• pp.1329-1336
• /
• 2015

Due to the advances in hardware technologies for low-power CMOS cameras, there have been various researches on wireless video sensor network(WVSN) applications including agricultural monitoring and environmental tracking. In such a system, its core technologies include video compression and wireless transmission. Since data of video sensors are bigger than those of other sensors, it is particularly necessary to estimate precisely the traffic after video encoding. In this paper, we present an estimation method for the encoded video traffic in WVSN networks. To estimate traffic characteristics accurately, the proposed method first measures complexities of frames and then applies them to the bit rate estimation adaptively. It is shown by experimental results that the proposed method improves the estimation of bit rate characteristics by more than 12% as compared to the existing method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.68-76
• /
• 2010

Touch-enabled technology is increasingly being accepted as a main communication interface between human and computers. However, conventional touchscreen technologies, such as resistive overlay, capacitive overlay, and SAW(Surface Acoustic Wave), are not cost-effective for large screens. As an alternative to the conventional methods, we introduce a newly emerging method, an optical imaging touchscreen which is much simpler and more cost-effective. Despite its attractive benefits, optical imaging touchscreen has to overcome some problems, such as heavy computational complexity, intermittent ghost points, and over-sensitivity, to be commercially used. Therefore, we designed a hardware controller for signal processing and multi-coordinate computation, and proposed Infrared-blocked DA(Dark Area) manipulation as a solution. While the entire optical touch control took 34ms with a 32-bit microprocessor, the designed hardware controller can manage 2 valid coordinates at 200fps and also reduce energy consumption of infrared diodes from 1.8Wh to 0.0072Wh.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.1055-1061
• /
• 2008

H.264 is the prominent video coding standard in various applications such as real-time streaming and digital multimedia broadcasting, since it provides enhanced compression performance, error resilience tools, and network adaptation. Compression efficiency of H.264 has been improved, however, it requires more computing and memory access than traditional methods. In this paper we proposed adaptive intra fast algorithm for real-time video surveillance system reducing the encoding complexity of H264/A VC. For this aim, temporal interrelationship between macroblock in the previous and the current frame is used to decide the encoding mode of macroblock fast. As a result, though video quality was deteriorated a little, less than 0.04dB, and bit rate was somewhat increased in suggested method, however, proposed method improved encoding time significantly and, in particular, encoding time of an image with little changes of neighboring background such as surveillance video was more shortened than traditional methods.