• Restorative Dentistry and Endodontics
• /
• 제24권3호
• /
• pp.473-481
• /
• 1999

This study evaluated the shear bond properties of IPS Empress glass ceramic to enamel and dentin surfaces with three ceramic surface treatments, and three resin cements. The influence of thermocycling was also investigated. The purpose of this study was to investigate the influences of resin cements, ceramic surface treatments, and thermocycling on shear bond properties. Ninety freshly extracted, noncarious human molars were selected for this study. The surface treatments of ceramic were etching <5.0% hydrofluoric acid, application of silane coupling agents(Tokuso Ceramic Primer, Clearfil porcelain bond, Monobond-S), and the combination of the two methods. Empress cylinders were bonded to enamel and dentin surfaces with three kinds of resin cements(Bistite resin cement, Panavia 21, Variolink). The specimens were aged in $37^{\circ}C$ distilled water for 24 hours. Half of the specimens were then thermocycled 500times between $5^{\circ}C$ and $55^{\circ}C$ with a dwell time of 15 seconds. Each specimen was debonded in shear mode and measured shear bond properties by using the universal testing machine(Zwick 020, Germany). The data were analyzed by SPSS/PC+(one-way ANOVA, Scheffe' s test and t-test). The results were as follows : 1. Without thermocyling, there was significant difference of shear bond strength to enamel surface between Bistite Resin Cement and Panavia 21 in case of etched and silane-treatment(p<0.05). 2. Without thermocyling, the shear bond strength of a group treated with silane and etching was significantly higher than that of a group treated with silane or etching with the application of Panavia 21 and Variolink(p<0.05). 3. A group treated with etching with the application of Variolink only showed a decrease of shear bond strength after thermocycling(p<0.05).

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.5-6
• /
• 2002

The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

• The Korean Journal of Pain
• /
• 제8권2호
• /
• pp.235-243
• /
• 1995

A retrospective study was performed to evaluate the effects, and side effects, of epidural analgesia for postoperative pain relief of 2,381 surgical patients who received general-epidural, or epidural anesthesia only. Anesthesia records, patients charts, and pain control records were reviewed and classified according to: age, sex, body weight, department, operation site, epidural puncture site, degree of pain relief by injection mode & epidural injectate, and side effects(including nausea, vomiting, pruritus, urinary retention and respiratory depression). The results were as follows: 1) From the total of 2,381 patients, there were 1,563(66%) female patients; 1.032(43%) patients were from Obstetrics and Gynecology. 2) Lower abdomen, thorax, lower extremity and upper abdomen in the operation site; and lumbar, upper, lower thoracic in puncture site were order of decreasing frequency. Length of epidural injection for pain relief averaged $1.72{\pm}1.02$ days. 3) Ninety three percent of the patients experienced mild or no pain in the postoperative course. Analgesic quality was not affected by the kind of epidural injectate. 4) Nausea occurred in 3.2% of all patients, vomiting in 1.1%, pruritus 0.9%, urinary retention 0.6%, respiratory depression 0.08%. 5) Frequency of nausea was higher with female patients compared to male patients(p<0.05). 6) Pruritus frequency was higher with male patients than female patients(p<0.05); and more frequent with patients who received epidural injection with morphine than patients who received epidural injection without morphine(p<0.01). 7) Urinary retention was higher in female patients, and more frequent with patients who had received epidural injection with morphine than epidural injection without morphine(p<0.05). 8) There were two cases of respiratory depression. The course of treatment consisted of: cessation of epidural infusion, then administration of oxygen and intravenous naloxone. We conclude that postoperative epidural analgesia with a combination of local anesthetics and opiate is and effective method for postoperative pain relief with low incidence of side effects. However, patients should be carefully evaluated as rare but severe complications of respiratory depression may ensue.

• 한국결정성장학회지
• /
• 제20권1호
• /
• pp.12-20
• /
• 2010

캄보디아와 탄자니아산 지르콘을 대상으로 메타믹상태와 색상변화에 대한 연구를 하였다. 이를 위해 U, Th 등의 방사성원소 검출을 위한 원소분석과 분광분석(UV-VIS 분광기, FTIR분광기)을 하였다. UV-VIS 분광분석 결과 청색과 무색에서는 고온형의 특징인 많은 흡수 피크들과 세기가 높게 나타났으며 우라늄이 검출된 녹색과 황색 시료에서는 흡수 피크들의 수가 현저히 적게 나타나 메타믹화가 진행되었음을 알 수 있었다. 열처리 후에는 반대의 결과가 나왔다. FTIR 분광 분석 결과 3100~3400 $cm^{-1}$ 영역에서 $[SiO_4]^{4-}$ 내부 진동의 3-포논 조합 모드 밴드들이 메타믹화된 녹색과 황색의 지르콘에서는 완만하며 없어진 밴드들도 있으나 열처리 후에는 다시 결정격자가 원상태로 회복되어 사라졌던 밴드들이 나타났다. 또한 지르콘에 우라늄이 함유되어 있는지를 알 수 있는 4800 $cm^{-1}$ 근처에서 $U^{4+}$의 피크가 녹색과 황색 시료에서 확인 되었다. 연구 결과 분광분석 과 열처리 실험으로 지르콘에 우라늄의 함유가 메타믹상태와 칼라의 변화에 미치는 영향을 확인할 수 있었다.

• 한국패류학회지
• /
• 제28권1호
• /
• pp.21-28
• /
• 2012

채묘시험은 4구간의 수온구 20.0, 23.0, 26.0, $29.0^{\circ}C$에 염분을 20.0, 30.0, 40.0으로 조절하여 온도와 염분의 혼합구에 대한 참굴 부착기 유생의 채묘시험을 실시한 결과, 수온 $29.0^{\circ}C$에서 염분 20.0과 30.0으로 조절된 채묘구에서 평균 $43.1{\pm}0.19%$와 $42.1{\pm}0.1%$로 유의적으로 가장 높은 채묘율을 보였고, 수온 $23.0^{\circ}C$염분 40.0에서 $34.9{\pm}0.6%$ 가장 낮은 부착률을 보였다 (P < 0.05). 부착밀도는 수온 $29.0^{\circ}C$에서 유의적으로 높았고, 염분 40.0의 고염분에서 유의적으로 낮았다(P < 0.05). 그러나 수온과 염분의 혼합효과는 유의적인 차이가 없었다 (P > 0.05). 수온에 따른 염분별 채묘구의 부착 빈도를 조사한 결과 가장 많은 부착빈도는 1.2-2.3 마리/$cm^2$을 보였고, 평균 부착밀도는 1.9-2.4마리/$cm^2$였다. 전체적으로 채묘율과 평균 부착밀도 그리고 부착빈도를 감안하면 본 실험 결과 효과적인 채묘관리를 위한 수온과 염분조건은 수온 $29.0^{\circ}C$, 염분 20.0-30.0으로 조절하는 것이 좋을 것으로 판단된다.

• Journal of Ginseng Research
• /
• 제44권1호
• /
• pp.105-114
• /
• 2020

Background: Exploring the pharmacokinetic (PK) changes of various active components of single herbs and their combinations is necessary to elucidate the compatibility mechanism. However, the lack of chemical standards and low concentrations of multiple active ingredients in the biological matrix restrict PK studies. Methods: A putative multiple reaction monitoring strategy based on liquid chromatography coupled with mass spectrometry (LC-MS) was developed to extend the PK scopes of quantification without resorting to the use of chemical standards. First, the compounds studied, including components with available reference standard (ARS) and components lacking reference standard (LRS), were preclassified to several groups according to their chemical structures. Herb decoctions were then subjected to ultrahigh-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry analysis with appropriate collision energy (CE) in MS² mode. Finally, multiple reaction monitoring transitions transformed from MS² of ultrahigh-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry were used for ultrahigh-performance liquid chromatography coupled with triple quadrupole mass spectrometry to obtain the mass responses of LRS components. LRS components quantification was further performed by developing an assistive group-dependent semiquantitative method. Results: The developed method was exemplified by the comparative PK process of single herbs Radix Ginseng (RG), Radix Polygala (RP), and their combinations (RG-RP). Significant changes in PK parameters were observed before and after combination. Conclusion: Results indicated that Traditional Chinese Medicine combinations can produce synergistic effects and diminish possible toxic effects, thereby reflecting the advantages of compatibility. The proposed strategy can solve the quantitative problem of LRS and extend the scopes of PK studies.

• 약학회지
• /
• 제51권2호
• /
• pp.96-102
• /
• 2007

Measurement of globotriaosylceramide (Gb3, ceramide trihexoside) in urine has clinical importance for monitoring after enzyme replacement therapy in Fabry disease patients. The disease is an X-linked lipid storage disorder that results from a deficiency of the enzyme ${\alpha}$-galactosidase A (${\alpha}$-Gal A). The lack of ${\alpha}$-Gal A causes an intracellular accumulation of glycosphingolipids, mainly Gb3. A simple, rapid, and highly sensitive analytical method for Gb3 in urine was developed without labor-extensive pre-treatment by electrospray ionization MS/MS (ESI-MS/MS). Only simple 5-fold dilution of urine is necessary for the extraction and isolation of Gb3 in urine. Gb3 in diluted urine was dissolved in dioxane containing C17:0 Gb3 as an internal standard. After centrifugation it was directly injected and analyzed through guard column by in combination with multiple reaction monitoring mode of ESI-MS/MS. Eight isoforms of Gb3 were completely resolved from urine matrix. C24:0 Gb3 occupied 50% of total Gb3 as a major component in urine. Linear relationship for Gb3 isoforms was found in the range of 0.005${\sim}$5.0 ${\mu}$g/ml. The limit of detection (S/N=5) was 0.005 ${\mu}$g/ml and limit of quantification was 0.05 ${\mu}$g/ml for C24:0 Gb3 with acceptable precision and accuracy. Correlation coefficient of calibration curves for 8 Gb3 isoforms ranged from 0.9598 to 0.9975. This method could be useful for rapid and sensitive 1st line Fabry disease screening, monitoring and/or diagnostic tool for Fabry disease.

• 한국광물학회지
• /
• 제22권4호
• /
• pp.385-393
• /
• 2009

마다가스카르 산 투어말린의 보석광물학적 특징들을 알기 위해 물리적 특성, 원소분석, 내포물 분석, 그리고 분광분석(UV-VIS 분광기, FTIR 분광기)을 하여 다른 산지와 비교 연구하였다. 물리적 특성은 다른 산지의 것과 큰 차이를 보이지 않았다. 자외선-가시광선 분광분석 결과 녹색과 청색의 시료는 Fe 성분이 많아 $Fe^{3+}$에 의한 714~743 nm 영역에서 높은 흡수 밴드가 나타났고 분홍색은 $Mn^{3+}$에 의해 510~530 nm에서 높은 흡수를 보였다. 갈색 시편은 Mn이 많아 $Mn^{2+}-Ti^{4+}$ 전하전이에 의해서 325 nm의 자외선 영역에서 나타난 높은 흡수에 기인하였다. 또한 무색 시편에서는 $Mn^{2+}$에 의한 406~413 nm 사이의 밴드가 매우 미약하거나 Mn의 양이 적어 $Mn^{2+}$의 영향이 거의 없어 발색이 되지 않았다고 본다. 적외선 분광분석에서는 4300~4500 $cm^{-1}$ 영역에서 금속-OH의 스트레칭과 밴딩이 조합된 모드에 의한 여러 개의 흡수 밴드가 나타났다. 내포물에서는 평행한 관상 속에 적철석이 녹아있는 형태가 나타났다. 연구 결과 마다가스카르 산의 투어말린은 Cu는 검출되지 않았으나 Fe과 Mn이 모두 검출되었고 이들의 양에 따라 다양한 색상이 나타남을 확인할 수 있었고 물리적 특성과 적외선 영역의 흡수 밴드, 그리고 내포물들은 다른 산지와 큰 차이를 보이지 않았음을 확인할 수 있었다.

• Journal of Animal Science and Technology
• /
• 제46권5호
• /
• pp.871-878
• /
• 2004

PEF 기법은 안전하고 천연상태에 가까운 식품을 생산하기 위한 최신의 비열처리법이다. 이 기법은 영양가, 풍미, 물성 및 관능적 성질의 영향을 최소화 시키는 안전한 식품생산에 이용할 수 있다. 이 공정은 두 전극사이에 놓여지는 식품에 고압의 전기를(20 $\sim$ 80kv/cm) 작용시킴으로써 실시된다. PEF 처리에 의해 미생물의 세포막이 분해되거나 불한정하게되어 미생물은 활력을 상실하게된다. PEF 공정에 의한 미생물의 비활성화 정도는 주로 전기장에서의 펄스강도와 처리시간에 의존한다. 미생물의 종류에 따라 상응하는 전기장의 강도와 처리시간이 요구된다. 처리효과는 미생물의 특성과 존재했던 배지에서의 생육단계에 의존한다. 효과적인 가공을 위해 여러종류의 공정조건이 적절하게 사용되어야 한다. PEF기법의 잠재적효용은 생물공학에서 식품저장에 이르기까지 다양하다. 식품가공과 관련해서 이 기법은 특히 에너지효율에서 경제적이며 처리되는 식품이 가공공정의 영향을 적게 받는다는 것이 이미 입증되었다. 이 기법을 식품가공에 응용하기위해 본 논문에서 개괄적으로 고찰한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.155.2-155.2
• /
• 2013

Strain-relaxed SiGe layer on Si substrate has numerous potential applications for electronic and opto- electronic devices. SiGe layer must have a high degree of strain relaxation and a low dislocation density. Conventionally, strain-relaxed SiGe on Si has been manufactured using compositionally graded buffers, in which very thick SiGe buffers of several micrometers are grown on a Si substrate with Ge composition increasing from the Si substrate to the surface. In this study, a new plasma process, i.e., the combination of PIII&D and HiPIMS, was adopted to implant Ge ions into Si wafer for direct formation of SiGe layer on Si substrate. Due to the high peak power density applied the Ge sputtering target during HiPIMS operation, a large fraction of sputtered Ge atoms is ionized. If the negative high voltage pulse applied to the sample stage in PIII&D system is synchronized with the pulsed Ge plasma, the ion implantation of Ge ions can be successfully accomplished. The PIII&D system for Ge ion implantation on Si (100) substrate was equipped with 3'-magnetron sputtering guns with Ge and Si target, which were operated with a HiPIMS pulsed-DC power supply. The sample stage with Si substrate was pulse-biased using a separate hard-tube pulser. During the implantation operation, HiPIMS pulse and substrate's negative bias pulse were synchronized at the same frequency of 50 Hz. The pulse voltage applied to the Ge sputtering target was -1200 V and the pulse width was 80 usec. While operating the Ge sputtering gun in HiPIMS mode, a pulse bias of -50 kV was applied to the Si substrate. The pulse width was 50 usec with a 30 usec delay time with respect to the HiPIMS pulse. Ge ion implantation process was performed for 30 min. to achieve approximately 20 % of Ge concentration in Si substrate. Right after Ge ion implantation, ~50 nm thick Si capping layer was deposited to prevent oxidation during subsequent RTA process at $1000^{\circ}C$ in N2 environment. The Ge-implanted Si samples were analyzed using Auger electron spectroscopy, High-resolution X-ray diffractometer, Raman spectroscopy, and Transmission electron microscopy to investigate the depth distribution, the degree of strain relaxation, and the crystalline structure, respectively. The analysis results showed that a strain-relaxed SiGe layer of ~100 nm thickness could be effectively formed on Si substrate by direct Ge ion implantation using the newly-developed PIII&D process for non-gaseous elements.