• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.149-158
• /
• 2019

This paper introduces an integrated Modeling & Simulation framework for the efficient development of the rescue robot which rescues a wounded patients or soldiers and disposes a dangerous objects or explosive materials in the battlefields and disastrous environments. An integrated M&S(Modeling & Simulation) framework would have enabled us to perform the dynamic simulation program GAZEBO based Software-in-the-Loop Simulation(SILS) which is to replacing the robot platform hardware with a simulation software. An integrated M&S framework would help us to perform designing robot and performance validation of robot control results more efficiently. Furthermore, Tele-operation performance in the unstructured environments could be improved. We review a case study of applying an integrated M&S framework tool in validating performance of mobility stabilization control, one of the most important control strategy in the rescue robot.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1390-1393
• /
• 2005

The hardening model based on the dislocation mechanics is employed to study the experimentally observed high tensile elongations of NiAl along the [110] orientation at intermediate temperatures. In the hardening model proposed, a mobility of dislocation is assumed to be restricted to glide through the slip plane by forest dislocation and thermally activated cross-slip event. Overall deformation behavior of NiAl was greatly influenced by temperature-dependent dislocation mobility that both experimental and simulated yield stresses decreased as temperature increased. The results of simulation showed anomalous hardening behaviors analogous to those of experiment at certain circumstances. This behavior occurred due to the hardening contributions generated by cross-slip events that disable the dislocation motion in the primary slip systems. By comparing simulation results with experiments, it is confirmed that the proposed hardening model can represent anomalous tensile elongations due to the hardening by forest dislocations and cross-slip events.

• Journal of the Korea Society for Simulation
• /
• v.14 no.4
• /
• pp.107-116
• /
• 2005

The multi user communications that is called as the multicast service should be applied into the evolving mobile networks. In this paper, we propose a fast multicast management scheme for mobile terminals in HMIPv6 (Hierarchical Mobile IPv6) based mobile networks. In HMIPv6 based mobile networks, we consider the mobile terminal mobility that the multicast management scheme during mobile handover is used for the multicast routing changing. The changing impact to the multicast routing Is determined from handovers in intra AR, and in inter AR or MAP. In this paper, we propose multicast supporting schemes that the tunneling scheme is used in intra AR handover, and the previous subscription scheme is used in inter AR handover for considering the changing impact of the multicast routing.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.2
• /
• pp.52-55
• /
• 2006

The OLEDs(Organic Light-Emitting Diodes) structure organizes the bottom layer using glass, ITO(indium thin oxide), hole injection layer, hole transport layer, emitting material layer, electron transport layer, electron injection layer and cathode using metal. OLED has various advantages. OLEDs research has been divided into structural side and emitting material side. The amount of emitting light and luminescence efficiency has been improved by continuing effort for emitting material layer. The emitting light mechanism of OLEDs consists of electrons and holes injected from cathode and anode recombination in emitting material layer. The mobilities of injected electrons and holes are different. The mobility of holes is faster than that of electrons. In order to get high luminescence efficiency by recombine electrons and holes, the balance of their mobility must be set. The more complex thin film structure of OLED becomes, the more understanding about physical phenomenon in each interface is needed. This paper observed what the thickness change of hole transport layer has an affection through the below experiments. Moreover, this paper uses numerical analysis about carrier transport layer thickness change on the basis of these experimental results that agree with simulation results.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.309-313
• /
• 2009

In this paper, end-to-end VoIP(Voice over Internet Protocol) performance is evaluated by simulation with NS-2 simulation tool. There are many results studied and published for VoIP performance over TCP/IP networks. But, almost all of them were focused on wired or wireless Internet environments. About MANET (Mobile Ad Hoc Network), VoIP is currently studying several points of research. In this paper, analysis of VoIP performance is done with focusing on the mobility of MANETs. MOS(Mean Opinion Score), network delay, packet loss rates are considered as end-to-end QoS performance parameters.

• Journal of Power System Engineering
• /
• v.14 no.3
• /
• pp.39-45
• /
• 2010

The dynamic stability of a robot vehicle can be enhanced by the Force-Angle Stability Margin concept that considers a variety of dynamic effects. To evaluate the robot vehicle stability, a SPI(stability performance index), which is a function of the suspension arm angles, was used. If the SPI has a minimum value, the robot vehicle has maximum stability. The FASM and SPI concepts were incorporated in the mobility simulation by using ADAMS and MATLAB/Simulink. The simulation results using these concepts showed significant improvements of the vehicle stability on rough terrains.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.11a
• /
• pp.3-7
• /
• 2005

The structure of $IP^2$(IP based-IMT Network Platform) as ubiquitous platform is three-layered model : Middleware including NCPF(Network Control Platform) and SSPF(Service Support Platform), IP-BB(IP-Backbone), Access network including Sensor network. A mobility management(MM) architecture in NCPF is proposed for $IP^2$. It manages routing information and location information separately. The existing method of multicast control in $IP^2$ is Remote Subscription. But Remote Subscription has problem that should be reconstructed whole Multicast tree when sender moves. To solve this problem, we propose a way to put Multicast Manager in NCPF.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.4
• /
• pp.689-703
• /
• 1996

In this paper, we evaluate the performance of zone-based registration. First, we propose a mobility function for single zone-based registration. And we establish the circumstances of multiple zone-based registration, which is based on the mobility function for single zone-based registration, and perform simulation programs for the circumstances. Using the simulation results, we obtain optimal N, the number of multiple zones which minimizes signalling traffic in radio channels. Results show that in most cases optimal N is 2. Multiple zone-based registration has less signalling traffic in radio channels than single zone-based registration and zone-based registration must be implemented as multiple zone-based registration.

• International Journal of Contents
• /
• v.16 no.1
• /
• pp.1-9
• /
• 2020

Recently, the number of traffic accidents on trunk roads tends to decrease due to the performance improvement of passenger vehicles. In the commuter rush hour of morning and evening, vehicles via residential road increases without going along trunk roads. Therefore, there are many traffic accidents of pedestrians (or bicycles) and vehicles on residential roads. In order to safeguard residents against traffic accidents, traffic calming devices (TCD), such as chicane, speed hump, and school zone, etc. have been introduced. Investigating these effects repeatedly is not easy since many times and efforts are required, such as observed at the place actually. In this paper, the effects of TCDs in residential areas, such as noise, speed, and emission of a vehicle, using Simulation of Urban Mobility (SUMO) are examined. As a result, it is found that it is possible to reduce the speed of the vehicle by TCD, and the level of noise at the location behind TCD becomes higher than the level of noise at the location of TCD implemented.

• Journal of Information Display
• /
• v.10 no.3
• /
• pp.101-106
• /
• 2009

In this study, a physical OLED analog behavior model for SPICE simulation was described using the Verilog-A language. The model was presented through theoretical equations for the J-V characteristics of OLED derived according to the internalcarrier emission equation based on a diffusion model at the Schottky barrier contact, and the mobility equation based on the Pool-Frenkel model. The accuracy of this model was examined by comparing it with the results of the device simulation that was conducted.