• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1227-1240
• /
• 2014

Abandoned mines often cause environmental problems, such as alteration of landscape, metal contamination, and landslides due to a heavy rainfall. Geotechnical and rheological tests were performed on waste materials corrected from Imgi waste rock dump, located in Busan Metropolitan City. Debris flow mobility was examined with the help of 1-D BING model which was often simulated in both subaerial and subaqueous environments. To determine flow curve, we used a vane-penetrated rheometer. The shear stress (${\tau}$)-shear rate (${\dot{\gamma}}$) and viscosity(${\eta}$)-shear rate (${\dot{\gamma}}$) relationships were plotted using a shear stress control mode. Well-known rheological models, such as Bingham, bilinear, Herschel-Bulkley, Power-law, and Papanastasiou concepts, were compared to the rheological data. From the test results, we found that the tested waste materials exhibited a typical shear shinning behavior in ${\tau}$-${\dot{\gamma}}$ and and ${\eta}$-${\dot{\gamma}}$ plots, but the Bingham behavior is often observed when the water contents increased. The test results show that experimental data are in good agreement with rheological models in the post-failure stage during shearing. Based on the rheological properties (i.e., Bingham yield stress and viscosity as a function of the volumetric concentration of sediment) of waste materials, initial flowing shape (5 m, 10 m, and 15 m) and yield stress (100 Pa, 200 Pa, 300 Pa, and 500 Pa) were input to simulate the debris flow motion. As a result, the runout distance and front velocity of debris flow are in inverse propositional to yield stress. In particular, when the yield stress is less than 500 Pa, most of failed masses can flow into the stream, resulting in a water contamination.

• Journal of KIISE:Databases
• /
• v.34 no.5
• /
• pp.448-464
• /
• 2007

Location-Based Services (LBSs) provide results to queries according to the location of the client issuing the query. In LBS, techniques such as caching and prefetching are effective approaches to reducing the data transmission from a server and query response time. However, they can lead to cache inefficiency and network overload due to the client's mobility and query pattern. To solve these drawbacks, we propose a semantic prefetching (SP) scheme using prefetching segment concept and improved cache replacement policies. When a mobile client enters a new service area, called semantic prefetching area, proposed scheme fetches the necessary semantic information from the server in advance. The mobile client maintains the information in its own cache for query processing of location-dependent data (LDD) in mobile computing environment. The performance of the proposed scheme is investigated in relation to various environmental variables, such as the mobility and query pattern of user, the distributions of LDDs and applied cache replacement strategies. Simulation results show that the proposed scheme is more efficient than the well-known existing scheme for range query and nearest neighbor query. In addition, applying the two queries dynamically to query processing improves the performance of the proposed scheme.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.6
• /
• pp.1397-1406
• /
• 1996

In this paper, we propose a discrete model of conveyor systems, which is frequently used in flexible manufacturing systems to transfer work-in-process( WIP) between manipulators. In the case where the time required for transferring WIP's between manipulators are greater than that of manufacturing itself, as in many flexible assembly lines, the quantitative model of the transfer systems is needed to analyze the behavior and productivity of the whole manufacturing system. The proposed model is based upon the assumptions that the length of any unit conveyor component is integer multiple of the length of a pallet and hat the transferring speed of the conveyor is constant. Under these assumptions, the observation moments and the length of the conveyor can be quantized. Hence, the state of a conveyor can be represented by two kinds of Boolean variables: one representing the presence of a pallet on each quantize conveyor length and the other representing the mobility of this pallet. The whole conveyor system can be modeling as a network composed of branches and knots based on these two Boolean variables. The proposed modelling method was tested with various conveyor system configurations and showed that the model can be adopted successfully for the simulation of transfer systems and of the piloting of manufacturing processes.

• Journal of KIISE:Software and Applications
• /
• v.29 no.5
• /
• pp.326-335
• /
• 2002

Recently there have been a number of researches to provide code mobility to lazy functional language (LFL) programs by translating LFL programs to Java programs. These approaches are basically baled on architectural similarities between abstract machines of LFLs and Java. The abstract machines of LFLs and Java programming language, Spineless Tagless G-Machine(STGM) and Java Virtual Machine(JVM) respectively, share important common features such as built- in garbage collector and stack machine architecture. Thus, we can provide code mobility to LFLs by translating LFLs to Java utilizing these common features. In this paper, we propose a new translation scheme which fully utilizes architectural common features between STGM and JVM. By redefining STGM as an eval-apply evaluation model, we have defined a new translation scheme which utilizes Java Virtual Machine Stack for function evaluation and totally eliminates stack simulation which causes array manipulation overhead in Java. Benchmark program translated to Java programs by our translation scheme run faster on JDK 1.3 than those translated by the previous schemes.

• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.428-436
• /
• 2002

Providing a mobile host with its required QoS is highly influenced by its mobility. The resource ReSerVation Protocol(RSVP) establishes and maintains a reservation state to ensure a given QoS level along the path from the sender to the receiver. However, RSVP is designed for use in fixed networks and thus it is inadequate in the mobile networking environment where a host changes its point of attachment. In this paper, we propose a new resource reservation protocol, RSVP-RA(RSVP by RSVP Agent) for mobile hosts. Our protocol assumes IETF Mobile IP as a mobility support mechanism. The proposed protocol introduce a new protocol entity - RSVP agent - to manage reservations in a mobile host's current visiting network. RSVP Agent is located in a local network and makes resource reservations in neighboring cells that the mobile host is expected to visit in the future. Thus, the proposed Protocol can provide a seamless QoS to the mobile host and significantly improve the scalability problem of RSVP by reducing the end-to-end signalling messages acrossing the backbone networks. The proposed protocols reduce packet delay, bandwidth overhead and the number of RSVP messages to maintain reservation states. We compared the performance of our proposed protocol with other proposed protocols in terms of signalling overhead, packet delay by simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.323-335
• /
• 2015

Mobile healthcare is a fusion of information technology and biotechnology and is a new type of health management service to keep people's health at anytime and anywhere without regard to time and space. The WBAN(Wireless Body Area Network) technology that collects bio signals and the data analysis and monitoring technology using mobile devices are essential for serving mobile healthcare. WBAN consisting of users with mobile devices meet another WBAN during movement, WBANs transmit data to the other media. Because of WBAN conflict, several nodes transmit data in same time slot so a collision will occur, resulting in the data transmission being failed and need more energy for re-transmission. In this thesis, we proposed a MAC protocol for WBAN with mobility to solve these problems. First, we proposed a superframe structure for WBAN. The proposed superframe consists of a TDMA(Time Division Muliple Access) based contention access phase with which a node can transmit data in its own time slot and a contention phase using CSMA/CA algorithm. Second, we proposed a network merging algorithm for conflicting WBAN based on the proposed MAC protocol. When a WBAN with mobility conflicts with other WBAN, data frame collision is reduced through network reestablishment. Simulations are performed using a Castalia based on the OMNeT++ network simulation framework to estimate the performance of the proposed superframe and algorithms. We estimated the performance of WBAN based on the proposed MAC protocol by comparing the performance of the WBAN based on IEEE 802.15.6. Performance evaluation results show that the packet transmission success rate and energy efficiency are improved by reducing the probability of collision using the proposed MAC protocol.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.505-511
• /
• 2023

In the present study, a deep learning model was established to predict the motion response of small fishing vessels. Hydrodynamic performances were evaluated for two small fishing vessels for the dataset of deep learning model. The deep learning model of the Long Short-Term Memory (LSTM) which is one of the recurrent neural network was utilized. The input data of LSTM model consisted of time series of six(6) degrees of freedom motions and wave height and the output label was selected as the time series data of six(6) degrees of freedom motions. The hyperparameter and input window length studies were performed to optimize LSTM model. The time series motion response according to different wave direction was predicted by establised LSTM. The predicted time series motion response showed good overall agreement with the analysis results. As the length of the time series increased, differences between the predicted values and analysis results were increased, which is due to the reduced influence of long-term data in the training process. The overall error of the predicted data indicated that more than 85% of the data showed an error within 10%. The established LSTM model is expected to be utilized in monitoring and alarm systems for small fishing vessels.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.123-131
• /
• 2009

Wireless networks have several unique features : node mobility, restricted bandwidth, time-variable bandwidth, large latency, and high bit error rates time due to channel fading. These features at wireless networks intend to decrease the performance TCP protocols are used in wireless networks. Lots of studies have been done for finding appropriate wireless transport protocols for current wireless communications. However, related studies have not provided good performance or some protocols have a good performance only in specific circumstances. Thus, these are not suitable for general wireless circumstance. Therefore, we propose a new wireless transport protocol which provides better performance than the previous ones. And we'd like to solve a problem that previous protocols cannot maintain their connections even though they have multiple paths until another path is successfully set up. To solve these problems, a new protocol ATP-M is proposed which is designed on already known TCP-M and ATP protocols. With NS-2 computer simulation, it is shown that this newly proposed protocol has better system throughput than TCP, TCP-M and ATP protocols.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.770-777
• /
• 2007

Smaller cell size in the micro-cell or pico-cell structure brings about more frequent hand-overs between cells, and higher speed movement of the mobile terminal makes short the permissible time interval for executing these hand-over procedures. In this situation the hand-over failure may occur or some packets may be lost during the hand-over. Moreover a rapid degradation of throughput is triggered by packet re-transmission for compensating such errors. The QoS (Quality of Services) of mobile multimedia applications with higher bits rate requirements and higher speed mobility are severely affected by even shot service interruption. This paper proposes a new hand-over scheme to provide seamless services in the next generation mobile communication systems. Simulation is done to evaluate the performance of the proposed scheme based on its hand-over failure rate and packet loss rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.227-232
• /
• 2013

Due to the development of ITS technology, various services related to transportation under vehicular environments have been provided. Especially, as wireless communication technology, WAVE has been established as a standard for vehicle-to-vehicle communications. WAVE has fast connection and excellent mobility characteristics. A VSC-A project is conducting by global automotive OEMs in USDOT. This project introduces the advanced safety services with vehicle-to-vehicle communications. In this paper, we presented the scenario of a do not pass warning service, which prevents an accident during overtaking activity by using vehicle-to-vehicle communications. In addition, we analyzed network performance under WAVE. In conclusion, we introduced the simulation results. Finally, we summarized the communication range and delay values for consideration factors for a overtaking model.