• 대한임베디드공학회논문지
• /
• 제9권2호
• /
• pp.101-107
• /
• 2014

Mobile robots use an environment map of its workspace to complete the surveillance task. However grid-based maps that are commonly used map format for mobile robot navigation use a large size of memory for accurate representation of environment. In this reason, grid-based maps are not suitable for path planning of mobile robots using embedded board. In this paper, we present the path planning algorithm that produce a secure path rapidly. The proposed approach utilizes a hybrid map that uses less memory than grid map and has same efficiency of a topological map. Experimental results show that the fast path planning uses only 1.5% of the time that a grid map based path planning requires. And the results show a secure path for mobile robot.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1039-1043
• /
• 2005

Despite the many significant advances made in robot architecture, the basic approaches are deliberative and reactive methods. They are quite different in recognizing outer environment and inner operating mechanism. For this reason, they have almost opposite characteristics. Later, researchers integrate these two approaches into hybrid architecture. In such architecture, Reactive module also called low-level motion control module have advantage in real-time reacting and sensing outer environment; Deliberative module also called high-level task planning module is good at planning task using world knowledge, reasoning and intelligent computing. This paper presents a framework of the integrated planning and control for mobile robot navigation. Unlike the existing hybrid architecture, it learns topological map from the world map by using MST (Minimum Spanning Tree)-based SOFM (Self-Organizing Feature Map) algorithm. High-level planning module plans simple tasks to low-level control module and low-level control module feedbacks the environment information to high-level planning module. This method allows for a tight integration between high-level and low-level modules, which provide real-time performance and strong adaptability and reactivity to outer environment and its unforeseen changes. This proposed framework is verified by simulation.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3873-3879
• /
• 2010

서비스 로봇은 사람이 생활하는 환경에서 동작한다. 이런 환경에서는 일반적인 휠베이스 모빌러티(Mobility) 방식의 이동로봇은 동적인 장애물과 정적인 장애물에 둘러싸여 있으므로 로봇의 움직임에 있어 자유로운 주행에 제약을 받게 된다. 이것은 소위 비홀로노믹(Non-Holonomic) 시스템 특성으로 주행 중인 이동로봇은 장애물을 만나면 별도의 조향장치를 사용하거나 차동 휠 구조 로봇의 회전 과정을 수행한 후 이동하고자 하는 방향으로 진행할 수 있다. 이런 장애물을 신속하게 회피하려면 홀로노믹(Holonomic) 시스템 특성이 필요하다. 홀로노믹 시스템은 별다른 회전과정 없이 단순히 좌우로 이동만 하면 된다. 이러한 특성으로 민첩하게 주행할 수 있고 좁은 공간에서 비홀로노믹 로봇보다 효율적이고 자유로운 주행이 가능하다. 그러므로 본 논문에서는 세 개의 옴니휠(Omni-wheels)을 사용한 홀로노믹 이동로봇 시스템을 개발한다. 세 개의 옴니휠을 사용한 이동로봇의 동역학과 모터 비선형 운동방정식을 고려한 정밀한 비선형 동역학 모델을 유도하여 제시한다. 유도된 식을 통해 각각의 모터 속도를 계산하고. 기본 속도제어기로는 PID방식을 사용한다. 그런데, 옴니휠을 이용한 홀로노믹 이동로봇의 추적제어는 정확한 방위각 센싱 데이터와 기준값(Reference Value)을 필요로 한다. 방위각 센싱은 부정확성과 불확실성(Uncertainty)을 갖는다. 부정확성은 센서 시스템의 노이즈와 얼라이어싱(Aliasing)으로 인하여 발생하고, 불확실성은 모바일 로봇의 왜란(Disturbance)과 미끄러짐(Slip)으로 발생한다. 본 논문에서는 퍼지 논리 추론에 의한 퍼지 방위각 추정기(Estimator)를 개발하여 방위각 제어의 새로운 개념을 제시한다. 끝으로, 퍼지 방위각 추정을 이용한 세 개의 전 방향 바퀴 구조의 이동로봇이 실시간으로 제어되는 실험을 통하여 이동로봇 시스템의 성능을 분석한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.36.6-36
• /
• 2001

The problem of robot navigation and control is a complex task. Its complexity and characteristics depends on the characteristics of the environment robot inhabits, robot construction (mechanical abilities to move, sense) and the job the robot is supposed to do. In this paper we propose a hybrid programming approach to mobile robot navigation and control in an indoor environment. In our approach we used declarative, procedural, and object oriented programming paradigms and we utilized some advantages of our distributed computing architecture. The programming languages corresponding to the paradigms we used were C, C++ and Prolog. In the paper we present some details of our mobile robot hardware and software structure, focusing on the software design and implementation.

• 로봇학회논문지
• /
• 제16권3호
• /
• pp.270-275
• /
• 2021

Most of the initial forms of cooperative robots were intended to repeat simple tasks in a given space. So, they showed no significant difference from industrial robots. However, research for improving worker's productivity and supplementing human's limited working hours is expanding. Also, there have been active attempts to use it as a service robot by applying AI technology. In line with these social changes, we produced a mobile manipulator that can improve the worker's efficiency and completely replace one person. First, we combined cooperative robot with mobile robot. Second, we applied speech recognition technology and deep learning based object detection. Finally, we integrated all the systems by ROS (robot operating system). This system can communicate with workers by voice and drive autonomously and perform the Pick & Place task.

• 로봇학회논문지
• /
• 제4권4호
• /
• pp.289-297
• /
• 2009

This paper presents the development and control of a two wheeled car-like mobile robot using balancing mechanism whose heading control is done by turning the handle. The mobile inverted pendulum is a combined system of a mobile robot and an inverted pendulum system. A sensor fusion technique of low cost sensors such as a gyro sensor and a tilt sensor to measure the balancing angle of the inverted pendulum robot system accurately is implemented. Experimental studies of the trajectory following control task has been conducted by command of steering wheel while balancing.

• 로봇학회논문지
• /
• 제4권3호
• /
• pp.169-176
• /
• 2009

Low-cost sensors have been widely used for mobile robot navigation in recent years. However, navigation performance based on low-cost sensors is not good enough to be practically used. Among many navigation techniques, building of an accurate map is a fundamental task for service robots, and mapping with low-cost IR sensors was investigated in this research. The robot's orientation uncertainty was considered for mapping by modifying the Bayesian update formula. Then, the data association scheme was investigated to improve the quality of a built map when the robot's pose uncertainty was large. Six low-cost IR sensors mounted on the robot could not give rich data enough to align the range data by the scan matching method, so a new sample-based method was proposed for data association. The real experiments indicated that the mapping method proposed in this research was able to generate a useful map for navigation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.722-725
• /
• 1990

This paper proposes a new path planning method for obstacle avoidance of mobile robot. In order to achieve easy planning of the path, a simple representation of the empty space is achieved based on thinning algorithm. The proposed Planning technique facilitates the direct use of information obtained by camera. Comparing to the V-graph method, the task of determining the shortest path from the resulting skeleton of empty space is optimized in terms of number of computation steps. The usefulness of the proposed method is ascertained by simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.392-395
• /
• 1995

This paper presents a time efficient method for determining a sequence of locations of a mobile manipulator that facilitates tracking of continuous path in cluttered environment. Given the task trajectory in the form of octree data structure, the algorithm performs characterization of task space and subsequent multistage optimization process to determine task feasible locations of the robot. Firstly, the collision free portion of the trajectory is determined and classified according to uniqueness domains of the inverse kinematics solutions. Then by implementing the extent of task feasible subspace into an optimization criteria, a multistage optimization problem is formulated to determines the task feasible locations of the mobile manipulator. The effectiveness of the proposed method is shown through a simulation study performed for a 3-d.o.f. manipulator with generic kinematic structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.818-829
• /
• 2003

A cooperating control algorithm for two nonholonomic mobile robots is proposed. The task is composed of collision avoidance against obstacles and carrying a ladder. The front robot and the rear robot are called the leader and the follower, respectively. Each robot has a nonholonomic constraint so it cannot move in perpendicular directions. The environment is initially supposed to be unknown except target position. The torque that drives leader is determined by distance between the leader and the target position or the distance between it and the obstacles. The torque by target is attractive and the torque by obstacles is repulsive. The two mobile robots are supposed to be connected by link that can be expanded and contracted. The follower computes its torque using position and orientation information from the leader by communication. Simulation results show that the robots can drive to target position without colliding into the obstacles and maintain the distance in the allowable range.