• Journal of Digital Contents Society
• /
• v.19 no.3
• /
• pp.505-512
• /
• 2018

Internet demand has increased rapidly, and Internet Protocol Version 4, the main Internet protocol, can not cope with various types of network demand in the future. Therefore, it is urgent to spread IPv6-based stable network to solve the shortage of Internet address resources. Due to the proliferation of IoT and the increase in mobile devices, efficient and optimal IPv6 routing design is indispensable. In this paper, we have studied about characteristics of IPv6, address system of IPv6, structure analysis and efficient routing technology among IPv6 terminals. Furthermore, experimental results on routing packet analysis and convergence time are presented in network - based IPv6 routing implementation environment. In addition, we show the results of the experiment analysis by dividing the implementation of IPv6 routing, operation test, and fail over performance into three kinds of routing protocol methods. As a result, this study can be applied to the introduction of IPv6 system, test bed environment construction, and network design.

• Journal of the Korean Geographical Society
• /
• v.41 no.5 s.116
• /
• pp.582-599
• /
• 2006

Due to the growing popularity of mobile information technology, more people, especially in the general public, have access to computerized geospatial information systems for wayfinding tasks or urban navigation. One of the problems with the current services is that, whether the users are exploring or navigating, whether they are travelers who are totally new to a region or long-term residents who have a fair amount of regional knowledge, the same method is applied and the direction are given in the same way. However, spatial knowledge for a given urban region expands in proportion to residency. Urban navigation is highly dependent on cognitive mental images, which is developed through spatial experience and social communication. Thus, the wayfinding service for a regional community can be highly supported, using well-known regional places. This research is to develop the framework for urban navigation within a regional community. The concept of communal ontology is proposed to aid in urban regional navigation. The experimental work was implemented with case study to collect regional landmarks, develop the ontological model and represent it with formal structure. The final product of this study will provide the geographical information of a region to the other agent and be the fundamental information structure for cognitive urban regional navigation.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.402-407
• /
• 2008

Recent popularity in mobile electronics requires higher standard on the mechanical strength of electronic packaging. Thus, the method of soldering between chip and substrate in electronic packaging process is changing from conventional method using intermetallic compound to a new method using organic solderability preservative (OSP) in order to improve the stability and the reliability of final product. Since current organic solder preservatives have several serious problems like thermo-stability during packaging process, however, it is necessary to develop new OSPs having thermo-stability. The main purpose of this study is to investigate the effect of MeOH/IPA (Isopropyl alcohol) ratio on the fluxing of a new OSP, developed in previous research, andto find out an optimum formulation of flux components for the application of the OSP in current packaging process. As a result of this study, it was revealed that higher MeOH/IPA ratio in flux showed better performance of fluxing a new OSP.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.461-467
• /
• 2003

This paper proposes the method of mobility implementation for location searching in the intelligence wireless ATM networks that expand and apply standard broadband signaling capabilities, and analyze the performance based on the numerical algorithm. The existing B-ISDN UNI protocol stack demands the location search mechanism to determine the location of mobile terminal in the wireless ATM networks because it use single protocol through the fixed PTP interface or PTM interface that don't support terminal mobility. The proposed method make possible the dynamic mobility at a part of wireless access by minimizing the signaling load without a falling-off in system performance by using the intelligence network technology according to the expansion of ATM and B-ISDN signaling integration based on the fixed networks. We implemented the performance analysis by MFC modeling based on numerical algorithm, and realized the efficiency of expenses by carrying out the comparative signaling performance evaluation to measure the relative gains of location search service in the intelligence wireless ATM system. The obtained results have the flexibility to operate in the public B-ISDN network environment without a change of existing B-ISDN/ATM NNI signaling reference to support the wireless ATM access system, and can easily expand to correspond to terminal mobility and various multimedia services in the next broadband PCS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.922-929
• /
• 2005

This paper proposes an adaptive pilot beacon equipment for mobile communication systems based on direct spread spectrum technology which generates the pilot channel for handoff between base stations by using the information acquired from the downstream wireless signal regarding the overhead channel information. Such an adaptive pilot beacon equipment will enable low power operation since among the wireless signals, only the pilot channel will be generated and transmitted. The pilot channel in the downstream link of the CDMA receiver is used to acquire time and frequency synchronization and this is used to calibrate the offset for the beacon, which implies that time synchronization using GPS is not required and any location where forward receive signal can be received can be used as the installation site. The downstream link pilot signal searching within the CDMA receiver is performed by FPGA and DSP. The FPGA is used to perform the initial synchronization for the pilot searcher and DSP is used to perform the offset correction between beacon clock and base station clock. The CDMA transmitter the adaptive pilot beacon equipment will use the timing offset information in the pilot channel acquired from the CDMA receiver and generate the downstream link pilot signal synchronized to the base station. The intermediate frequency signal is passed through the FIR filter and subsequently upconverted and amplified before being radiated through the antenna.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.63-70
• /
• 2011

A bicycle is different from vehicles in the structure that a rider is fully exposed to the surrounding environment. Therefore, it needs to make use of prior information about local weather, air quality, trail road condition. Moreover, since it depends on human power for moving, it should acquire route property such as hill slope, winding, and road surface to improve its efficiency in everyday use. Recent mobile applications which are to be used during bicycle riding let us aware of the necessity of development of intelligent bicycles. This study aims to develop a riding state (up-hill, down-hill, accelerating, braking) recognition algorithm using a low-power wrist watch type embedded system which has 3-axis accelerometer and wireless communication capability. The developed algorithm was applied to 19 experimental riding data and showed more than 95% of correct recognition over 83.3% of the total dataset. The altitude and temperature sensor also in the embedded system mounted on the bicycle is being used to improve the accuracy of the algorithm. The developed riding state recognition algorithm is expected to be a platform technology for intelligent bicycle interface system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.32-39
• /
• 2006

5.8GHz DSRC(Dedicated Short Range Communications) is a short to medium range communications service that supports both public safety and private operations in roadside to vehicle and vehicle communication. However the 5.8GHz frequency may cause the shadowing effect or communication blocking problem when there is an obstacle or another vehicle between RSE (Road Side Equipment) and OBE (On Board Equipment). In this paper, to solve this problem of the 5.8GHz DSRC, we propose a relay protocol based on the standard of DSRC radio communication between RSE and OBE in the 5.8GHz band made by TTA (Telecommunication Technology Association). By using the proposed relay protocol to DSRC system and intervehicle communication, we also consider a fixed relay protocol and mobile relay protocol. We expect to apply this relay protocol for the DSRC intervehicle communication and video communication between drivers and safe distance among vehicles in the near future.

• Spatial Information Research
• /
• v.21 no.3
• /
• pp.89-101
• /
• 2013

Recently, importance of indoor space is on the rise, as larger and more complex buildings are taking place due to development of building technology. Accordingly, range of the target area of spatial information service is rapidly expanding from outdoor space to indoor space. Various demands for indoor spatial information are expected to be created in the future through development of high technologies such as IT Mobile and convergence with various area. Thus this research takes a look at available methods for building indoor spatial information and then builds high accuracy three-dimensional indoor spatial information using indoor high accuracy laser survey and 3D vector process technique. The accuracy of built 3D indoor model is evaluated by overlap analysis method refer to a digital map, and the result showed that it could guarantee its positional accuracy within 0.04m on the x-axis, 0.06m on the y-axis. This result could be used as a fundamental data for building indoor spatial data and for integrated use of indoor and outdoor spatial information.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1142-1149
• /
• 2007

In this paper, the development of wideband MIMO channel sounder and a pilot measurement result is described for research on the multi antenna radio propagation characteristics considering urban environment at microwave frequencies. We developed $4{\times}4$ MIMO(BW:100 MHz) channel sounder using the high speed switching mechanism and periodic pseudo random binary signals method considering next generation mobile communication system. A pilot measurement campaign at the urban area of Bundang is presented for confirmation of system performance. From the analysis of measurement data, wideband path loss exponent of 3.7 and 8 GHz band is 1.79 and 1.76. Average RMS delay spread is 200 ns and 42 ns respectively. From the experiment results, operation of this measurement system is confirmed considering research for a coverage, SNR and channel capacity in urban environment at microwave frequencies.

• Journal of Internet Computing and Services
• /
• v.19 no.5
• /
• pp.67-75
• /
• 2018

According to Symantec's Internet Security Threat Report(2018), Internet security threats such as Cryptojackings, Ransomwares, and Mobile malwares are rapidly increasing and diversifying. It means that detection of malwares requires not only the detection accuracy but also versatility. In the past, malware detection technology focused on qualitative performance due to the problems such as encryption and obfuscation. However, nowadays, considering the diversity of malware, versatility is required in detecting various malwares. Additionally the optimization is required in terms of computing power for detecting malware. In this paper, we present Stream Order(SO)-CNN and Incremental Coordinate(IC)-CNN, which are malware detection schemes using CNN(Convolutional Neural Network) that effectively detect intelligent and diversified malwares. The proposed methods visualize each malware binary file onto a fixed sized image. The visualized malware binaries are learned through GoogLeNet to form a deep learning model. Our model detects and classifies malwares. The proposed method reveals better performance than the conventional method.