• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.4
• /
• pp.68-76
• /
• 2011

In this paper, we propose a method for joining mobile nodes in wireless sensor networks using hysteresis features. It is possible to use static hysteresis, whereby joining and withdrawal are carried out repeatedly when a mobile node is located at boundary points. The energy consumption of the nodes can be effectively managed by a decrease in the response packets of the neighbors under the joining requests of the mobile nodes. However, static hysteresis causes a decrease in the joining rate. In order to increase the joining rate, dynamic hysteresis is used. To evaluate the performance of the proposed technique, the joining rate is investigated and analyzed. Simulation results show that the proposed method enables efficient joining according to the mobility of nodes in wireless sensor networks.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.4
• /
• pp.61-68
• /
• 2009

In this paper, we propose a Cluster-based Cooperative Routing using ARQ (CCRA) for supporting both reliability and transmitting efficient service in mobile ad-hoc wireless sensor networks with Rayleigh fading environments. The main contributions and features of this paper are as follows. First, the clustering method which uses the position information of nodes as underlying structure for supporting reliable transmission services is used. Second, the cooperative data transmission method based on the underlying clustering informations is used to improve both reliability and data transmission efficiency. Third, the ARQ-based transmission is used to improve transmission reliability. Fourth, we consider a realistic approach, in the points of view of mobile ad-hoc wireless sensor networks, based on mobile sensor nodes as well as fixed sensor nodes in the sensor fields while the conventional research for sensor networks focus on mainly fixed sensor networks. The performance evaluation of proposed routing protocol implemented via simulation using Optimized Network Engineering Tool (OPNET) and theoretical analysis.

• International journal of advanced smart convergence
• /
• v.1 no.2
• /
• pp.1-11
• /
• 2012

IP-based Wireless Sensor Networks (IP-WSNs) are gaining importance for their broad range of applications in health care, home automation, environmental monitoring, industrial control, vehicle telematics, and agricultural monitoring. In all these applications, a fundamental issue is the mobility in the sensor network, particularly with regards to energy efficiency. Because of the energy inefficiency of network-based mobility management protocols, they can be supported via IP-WSNs. In this paper, we propose a network-based mobility-supported IP-WSN protocol called mSFP, or the mSFP: "Multicasting-supported Inter-Domain Mobility Management Scheme in Sensor-based Fast Proxy Mobile IPv6 Networks". Based on [8,20], we present its network architecture and evaluate its performance by considering the signaling and mobility cost. Our analysis shows that the proposed scheme reduces the signaling cost, total cost, and mobility cost. With respect to the number of IP-WSN nodes, the proposed scheme reduces the signaling cost by 7% and the total cost by 3%. With respect to the number of hops, the proposed scheme reduces the signaling cost by 6.9%, the total cost by 2.5%, and the mobility cost by 1.5%. With respect to the number of IP-WSN nodes, the proposed scheme reduces the mobility cost by 1.6%.

• International Journal of Computer Science & Network Security
• /
• v.22 no.9
• /
• pp.389-395
• /
• 2022

A Mobile Sensor Network is widely used in real time applications. A critical need in Mobile Sensor Network is to achieve energy efficiency during routing as the sensor nodes have scarce energy resource. The nodes' mobility in MWSN poses a challenge to design an energy efficient routing protocol. Clustering helps to achieve energy efficiency by reducing the organization complexity overhead of the network which is proportional to the number of nodes in the network. This paper proposes"EERA: Energy Efficient Routing Algorithm for Mobile Sensor Network" is divided into five phases. 1, Cluster Formation 2.Cluster head and Transmission head selection 3.Path Establishment / Route discovery and 4,Data Transmission. Experimental Analysis has been done and is found that the proposed method performs better than the existing method with respect to four parameters.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.12
• /
• pp.4372-4388
• /
• 2014

Robotic sensor network (RSN) contains mobile sensors and robots providing feasible solution for many multi-agent applications. One of the most critical issues in RSN and its application is how to effectively assign tasks. This paper presents a novel connectivity preserving hybrid task allocation strategy to answer the question particularly for RSN. Firstly, we model the task allocation in RSN to distinguish the discovering and allocating processes. Secondly, a fully distributed simple Task-oriented Unoccupied Neighbor Algorithm, named TUNA, is developed to allocate tasks with only partial view of the network topology. A connectivity controller is finally developed and integrated into the strategy to guarantee the global connectivity of entire RSN, which is critical to most RSN applications. The correctness, efficiency and scalability of TUNA are proved with both theoretical analysis and experimental simulations. The evaluation results show that TUNA can effectively assign tasks to mobile robots with the requirements of only a few messages and small movements of mobile agents.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.5
• /
• pp.2245-2266
• /
• 2016

The hop count routing metric is widely used in routing protocols of Wireless Sensor Networks (WSNs) due to its simplicity and effectiveness. With a lower hop count route, fewer transmissions are required to send a packet from the source to the destination. This can improve the throughput of a network because fewer transmissions results in less channel contention and interference. Despite this, the hop count routing metric may not be ideal for mobile scenarios where the topology of a network changes constantly and rapidly. In this paper, we propose to increase route stability in mobile WSNs by discovering paths that are more stable during route discoveries using routing metrics. Two routing metrics were proposed, the true beauty of these routing metrics lies in the fact that they can even be used even without specialized hardware such as GPS and other sensors. We implemented the proposed routing metrics in the AODV routing protocol and found that they are highly effective and outperform other stability-based routing metrics and the hop count routing metric.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.10
• /
• pp.2473-2492
• /
• 2012

Energy conservation is a vital issue in wireless sensor networks. Recently, employing mobile sinks for data gathering become a pervasive trend to deal with this problem. The sink can follow stochastic or pre-defined paths; however the controlled mobility pattern nowadays is taken more into consideration. In this method, the sink moves across the network autonomously and changes its position based on the energy factors. Although the sink mobility would reduce nodes' energy consumption and enhance the network lifetime, the overhead caused by topological changes could waste unnecessary power through the sensor field. In this paper, we proposed EEDARS, an energy-efficient dual-sink algorithm with role switching mechanism which utilizes both static and mobile sinks. The static sink is engaged to avoid any periodic flooding for sink localization, while the mobile sink adaptively moves towards the event region for data collection. Furthermore, a role switching mechanism is applied to the protocol in order to send the nearest sink to the recent event area, hence shorten the path. This algorithm could be employed in event-driven and multi-hop scenarios. Analytical model and extensive simulation results for EEDARS demonstrate a significant improvement on the network metrics especially the lifetime, the load and the end-to-end delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.791-800
• /
• 2010

Recently wireless sensor networks as a field of ubiquitous computing technology was in the limelight. To use and collect the necessary information, Sink node mobility is essential. TTDD(Two-Tier Data Dissemination) proposed most common technique associated with Mobile sink node in wireless sensor networks, but issues exist that the use of many control packet falls into the energy efficiency. The technique for solving problems is Cluster-Based Energy-efficient Routing protocol (CBPER). But CBPER does not transmit the data correctly to sink node or source node. In this paper, we propose An Energy-Efficient Routing Protocol based on Static Grid using mobile sink nodes in order to solve the data transmission failure and reduce the energy consumption in Wireless Sensor Networks. We have evaluated it with the NS-2 simulator. Our results show that the proposed protocol saves the energy consumption up to 34% in comparison with CBPER. We also prove that the proposed protocol can transmit more accurate data to the sink de than CBPER.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.330-333
• /
• 2009

WSNs is evolving different kinds of networks depending on different circumstances, among those we have HWSNs (Hybrid Wireless Sensor Networks) which invokes sensor nodes mobility. In hybrid wireless sensor networks (HWSNs), reducing energy consumption of resource constrained and adaptability to the sensors nodes motion are the crucial problems; to overcome this we need a scalable MAC protocol. Many MAC protocols have been proposed by different researchers, but in this paper we propose LMAC because it outperforms S-MAC, T-MAC and D-MAC protocols comparing to its improvement of energy efficiency and mobile adaptability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4738-4753
• /
• 2018

Efficient rendezvous node selection and routing algorithm (RNSRA) for wireless sensor networks with mobile sink that visits rendezvous node to gather data from sensor nodes is proposed. In order to plan an optimal moving tour for mobile sink and avoid energy hole problem, we develop the RNSRA to find optimal rendezvous nodes (RN) for the mobile sink to visit. The RNSRA can select the set of RNs to act as store points for the mobile sink, and search for the optimal multi-hop path between source nodes and rendezvous node, so that the rendezvous node could gather information from sensor nodes periodically. Fitness function with several factors is calculated to find suitable RNs from sensor nodes, and the artificial bee colony optimization algorithm (ABC) is used to optimize the selection of optimal multi-hop path, in order to forward data to the nearest RN. Therefore the energy consumption of sensor nodes is minimized and balanced. Our method is validated by extensive simulations and illustrates the novel capability for maintaining the network robustness against sink moving problem, the results show that the RNSRA could reduce energy consumption by 6% and increase network lifetime by 5% as comparing with several existing algorithms.